netdev - [PATCH net-next v2 1/7] net: phy: marvell10g: Use get

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190222233744.25735-2-maxime.chevallier@bootlin.com>
Date:   Sat, 23 Feb 2019 00:37:38 +0100
From:   Maxime Chevallier <maxime.chevallier@...tlin.com>
To:     davem@...emloft.net
Cc:     Maxime Chevallier <maxime.chevallier@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org,
        Antoine Tenart <antoine.tenart@...tlin.com>,
        thomas.petazzoni@...tlin.com, gregory.clement@...tlin.com,
        miquel.raynal@...tlin.com, nadavh@...vell.com, stefanc@...vell.com,
        mw@...ihalf.com
Subject: [PATCH net-next v2 1/7] net: phy: marvell10g: Use get_features to get the PHY abilities

The Alaska family of 10G PHYs has more abilities than the ones listed in
PHY_10GBIT_FULL_FEATURES, the exact list depending on the model.

Make use of the newly introduced .get_features call to build this list,
using genphy_c45_pma_read_abilities to build the list of supported
linkmodes, and adding autoneg ability based on what's reported by the AN
MMD.

.config_init is still used to validate the interface_mode.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---

V2: Added missing blank line

 drivers/net/phy/marvell10g.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 586ae1bc5a50..89920b10d75b 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -233,8 +233,6 @@ static int mv3310_resume(struct phy_device *phydev)
 
 static int mv3310_config_init(struct phy_device *phydev)
 {
-	int ret, val;
-
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
 	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
@@ -242,6 +240,13 @@ static int mv3310_config_init(struct phy_device *phydev)
 	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
 		return -ENODEV;
 
+	return 0;
+}
+
+static int mv3310_get_features(struct phy_device *phydev)
+{
+	int ret, val;
+
 	if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
 		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
 		if (val < 0)
@@ -416,7 +421,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.phy_id		= 0x002b09aa,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
-		.features	= PHY_10GBIT_FEATURES,
+		.get_features	= mv3310_get_features,
 		.soft_reset	= gen10g_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
-- 
2.19.2