netdev - [PATCH net 2/3] mlxsw: pci: Reincrease PCI reset timeout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 18 Apr 2019 07:14:14 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>,
        Petr Machata <petrm@...lanox.com>,
        Amit Cohen <amitc@...lanox.com>, mlxsw <mlxsw@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net 2/3] mlxsw: pci: Reincrease PCI reset timeout

During driver initialization the driver sends a reset to the device and
waits for the firmware to signal that it is ready to continue.

Commit d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout")
increased the timeout to 13 seconds due to longer PHY calibration in
Spectrum-2 compared to Spectrum-1.

Recently it became apparent that this timeout is too short and therefore
this patch increases it again to a safer limit that will be reduced in
the future.

Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Fixes: d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout")
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
Acked-by: Jiri Pirko <jiri@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
index ffee38e36ce8..8648ca171254 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -27,7 +27,7 @@
 
 #define MLXSW_PCI_SW_RESET			0xF0010
 #define MLXSW_PCI_SW_RESET_RST_BIT		BIT(0)
-#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	13000
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	20000
 #define MLXSW_PCI_SW_RESET_WAIT_MSECS		100
 #define MLXSW_PCI_FW_READY			0xA1844
 #define MLXSW_PCI_FW_READY_MASK			0xFFFF
-- 
2.20.1