netdev - [PATCH net-next 05/17] mlxsw: spectrum: Allow lane to start from non-zero index

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 18 Apr 2022 09:42:29 +0300
From:   Ido Schimmel <idosch@...dia.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
        jiri@...dia.com, vadimp@...dia.com, petrm@...dia.com,
        andrew@...n.ch, dsahern@...il.com, mlxsw@...dia.com,
        Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 05/17] mlxsw: spectrum: Allow lane to start from non-zero index

From: Jiri Pirko <jiri@...dia.com>

So far, the lane index always started from zero. That is not true for
modular systems with gearbox-equipped linecards. Loose the check so the
lanes can start from non-zero index.

Signed-off-by: Jiri Pirko <jiri@...dia.com>
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 684910ca7cf4..120880fad7f8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -486,6 +486,7 @@ mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, u16 local_port,
 {
 	char pmlp_pl[MLXSW_REG_PMLP_LEN];
 	bool separate_rxtx;
+	u8 first_lane;
 	u8 module;
 	u8 width;
 	int err;
@@ -498,6 +499,7 @@ mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, u16 local_port,
 	module = mlxsw_reg_pmlp_module_get(pmlp_pl, 0);
 	width = mlxsw_reg_pmlp_width_get(pmlp_pl);
 	separate_rxtx = mlxsw_reg_pmlp_rxtx_get(pmlp_pl);
+	first_lane = mlxsw_reg_pmlp_tx_lane_get(pmlp_pl, 0);
 
 	if (width && !is_power_of_2(width)) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Unsupported module config: width value is not power of 2\n",
@@ -518,7 +520,7 @@ mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp, u16 local_port,
 				local_port);
 			return -EINVAL;
 		}
-		if (mlxsw_reg_pmlp_tx_lane_get(pmlp_pl, i) != i) {
+		if (mlxsw_reg_pmlp_tx_lane_get(pmlp_pl, i) != i + first_lane) {
 			dev_err(mlxsw_sp->bus_info->dev, "Port %d: Unsupported module config: TX and RX lane numbers are not sequential\n",
 				local_port);
 			return -EINVAL;
-- 
2.33.1