[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 2 Feb 2023 11:02:40 +0200
From: Nikolay Aleksandrov <razor@...ckwall.org>
To: Petr Machata <petrm@...dia.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Roopa Prabhu <roopa@...dia.com>, netdev@...r.kernel.org
Cc: bridge@...ts.linux-foundation.org, Ido Schimmel <idosch@...dia.com>
Subject: Re: [PATCH net-next mlxsw v2 08/16] net: bridge: Add netlink knobs
for number / maximum MDB entries
On 02/02/2023 10:52, Nikolay Aleksandrov wrote:
> On 01/02/2023 19:28, Petr Machata wrote:
>> The previous patch added accounting for number of MDB entries per port and
>> per port-VLAN, and the logic to verify that these values stay within
>> configured bounds. However it didn't provide means to actually configure
>> those bounds or read the occupancy. This patch does that.
>>
>> Two new netlink attributes are added for the MDB occupancy:
>> IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and
>> BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy.
>> And another two for the maximum number of MDB entries:
>> IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and
>> BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one.
>>
>> Note that the two new IFLA_BRPORT_ attributes prompt bumping of
>> RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough.
>>
>> The new attributes are used like this:
>>
>> # ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \
>> mcast_vlan_snooping 1 mcast_querier 1
>> # ip link set dev v1 master br
>> # bridge vlan add dev v1 vid 2
>>
>> # bridge vlan set dev v1 vid 1 mcast_max_groups 1
>> # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1
>> # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1
>> Error: bridge: Port-VLAN is already a member in mcast_max_groups (1) groups.
>>
>> # bridge link set dev v1 mcast_max_groups 1
>> # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2
>> Error: bridge: Port is already a member in mcast_max_groups (1) groups.
>>
>> # bridge -d link show
>> 5: v1@v2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br [...]
>> [...] mcast_n_groups 1 mcast_max_groups 1
>>
>> # bridge -d vlan show
>> port vlan-id
>> br 1 PVID Egress Untagged
>> state forwarding mcast_router 1
>> v1 1 PVID Egress Untagged
>> [...] mcast_n_groups 1 mcast_max_groups 1
>> 2
>> [...] mcast_n_groups 0 mcast_max_groups 0
>>
>> Signed-off-by: Petr Machata <petrm@...dia.com>
>> ---
>>
>> Notes:
>> v2:
>> - Drop locks around accesses in
>> br_multicast_{port,vlan}_ngroups_{get,set_max}(),
>> - Drop bounces due to max<n in
>> br_multicast_{port,vlan}_ngroups_set_max().
>>
>> include/uapi/linux/if_bridge.h | 2 ++
>> include/uapi/linux/if_link.h | 2 ++
>> net/bridge/br_multicast.c | 50 ++++++++++++++++++++++++++++++++++
>> net/bridge/br_netlink.c | 17 +++++++++++-
>> net/bridge/br_private.h | 15 +++++++++-
>> net/bridge/br_vlan.c | 11 +++++---
>> net/bridge/br_vlan_options.c | 33 +++++++++++++++++++++-
>> net/core/rtnetlink.c | 2 +-
>> 8 files changed, 124 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
>> index d9de241d90f9..d60c456710b3 100644
>> --- a/include/uapi/linux/if_bridge.h
>> +++ b/include/uapi/linux/if_bridge.h
>> @@ -523,6 +523,8 @@ enum {
>> BRIDGE_VLANDB_ENTRY_TUNNEL_INFO,
>> BRIDGE_VLANDB_ENTRY_STATS,
>> BRIDGE_VLANDB_ENTRY_MCAST_ROUTER,
>> + BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS,
>> + BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS,
>> __BRIDGE_VLANDB_ENTRY_MAX,
>> };
>> #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1)
>> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
>> index 1021a7e47a86..1bed3a72939c 100644
>> --- a/include/uapi/linux/if_link.h
>> +++ b/include/uapi/linux/if_link.h
>> @@ -564,6 +564,8 @@ enum {
>> IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
>> IFLA_BRPORT_LOCKED,
>> IFLA_BRPORT_MAB,
>> + IFLA_BRPORT_MCAST_N_GROUPS,
>> + IFLA_BRPORT_MCAST_MAX_GROUPS,
>> __IFLA_BRPORT_MAX
>> };
>> #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
>> diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
>> index e7ae339a8757..393ffc21c3e8 100644
>> --- a/net/bridge/br_multicast.c
>> +++ b/net/bridge/br_multicast.c
>> @@ -768,6 +768,56 @@ static void br_multicast_port_ngroups_dec(struct net_bridge_port *port, u16 vid)
>> br_multicast_port_ngroups_dec_one(&port->multicast_ctx);
>> }
>>
>> +u32 br_multicast_port_ngroups_get(const struct net_bridge_port *port)
>> +{
>> + return READ_ONCE(port->multicast_ctx.mdb_n_entries);
>> +}
>> +
>> +int br_multicast_vlan_ngroups_get(struct net_bridge *br,
>> + const struct net_bridge_vlan *v,
>> + u32 *n)
>> +{
>> + if (br_multicast_port_ctx_vlan_disabled(&v->port_mcast_ctx))
>> + return -EINVAL;
>
> This check seems unnecessary since the helper is used only if !br_multicast_port_ctx_vlan_disabled()
> below.
>
>> +
>> + *n = READ_ONCE(v->port_mcast_ctx.mdb_n_entries);
>> + return 0;
>> +}
>> +
>> +void br_multicast_port_ngroups_set_max(struct net_bridge_port *port, u32 max)
>> +{
>> + WRITE_ONCE(port->multicast_ctx.mdb_max_entries, max);
>> +}
>> +
>> +int br_multicast_vlan_ngroups_set_max(struct net_bridge *br,
>> + struct net_bridge_vlan *v, u32 max,
>> + struct netlink_ext_ack *extack)
>> +{
>> + if (br_multicast_port_ctx_vlan_disabled(&v->port_mcast_ctx)) {
>> + NL_SET_ERR_MSG_MOD(extack, "Multicast snooping disabled on this VLAN");
>> + return -EINVAL;
>> + }
>
> same comment about the check
Ok, not exactly the same. I see that for the max case this check is used, please pull it
in the vlan code and just drop this helper. Both read/write will be doing the same then.
>
>> +
>> + WRITE_ONCE(v->port_mcast_ctx.mdb_max_entries, max);
>> + return 0;
>> +}
>> +
>> +u32 br_multicast_port_ngroups_get_max(const struct net_bridge_port *port)
>> +{
>> + return READ_ONCE(port->multicast_ctx.mdb_max_entries);
>> +}
>> +
>> +int br_multicast_vlan_ngroups_get_max(struct net_bridge *br,
>> + const struct net_bridge_vlan *v,
>> + u32 *max)
>> +{
>> + if (br_multicast_port_ctx_vlan_disabled(&v->port_mcast_ctx))
>> + return -EINVAL;
>> +
>> + *max = READ_ONCE(v->port_mcast_ctx.mdb_max_entries);
>> + return 0;
>> +}
>
> So I don't think we need special flavours for vlan and port, the point of using common
> port_mcast_ctx for both was to unify the code as much as possible. If the reason was
> to add that check then we already have it below before calling that code, no?
> Could we instead add one helper for each action that takes pmctx pointers and works on them?
>
> Thanks,
> Nik
>
>> +
>> static void br_multicast_destroy_port_group(struct net_bridge_mcast_gc *gc)
>> {
>> struct net_bridge_port_group *pg;
>> diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
>> index a6133d469885..968d0963d9a9 100644
>> --- a/net/bridge/br_netlink.c
>> +++ b/net/bridge/br_netlink.c
>> @@ -202,6 +202,8 @@ static inline size_t br_port_info_size(void)
>> + nla_total_size_64bit(sizeof(u64)) /* IFLA_BRPORT_HOLD_TIMER */
>> #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
>> + nla_total_size(sizeof(u8)) /* IFLA_BRPORT_MULTICAST_ROUTER */
>> + + nla_total_size(sizeof(u32)) /* IFLA_BRPORT_MCAST_N_GROUPS */
>> + + nla_total_size(sizeof(u32)) /* IFLA_BRPORT_MCAST_MAX_GROUPS */
>> #endif
>> + nla_total_size(sizeof(u16)) /* IFLA_BRPORT_GROUP_FWD_MASK */
>> + nla_total_size(sizeof(u8)) /* IFLA_BRPORT_MRP_RING_OPEN */
>> @@ -298,7 +300,11 @@ static int br_port_fill_attrs(struct sk_buff *skb,
>> nla_put_u32(skb, IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT,
>> p->multicast_eht_hosts_limit) ||
>> nla_put_u32(skb, IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
>> - p->multicast_eht_hosts_cnt))
>> + p->multicast_eht_hosts_cnt) ||
>> + nla_put_u32(skb, IFLA_BRPORT_MCAST_N_GROUPS,
>> + br_multicast_port_ngroups_get(p)) ||
>> + nla_put_u32(skb, IFLA_BRPORT_MCAST_MAX_GROUPS,
>> + br_multicast_port_ngroups_get_max(p)))
>> return -EMSGSIZE;
>> #endif
>>
>> @@ -883,6 +889,8 @@ static const struct nla_policy br_port_policy[IFLA_BRPORT_MAX + 1] = {
>> [IFLA_BRPORT_MAB] = { .type = NLA_U8 },
>> [IFLA_BRPORT_BACKUP_PORT] = { .type = NLA_U32 },
>> [IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT] = { .type = NLA_U32 },
>> + [IFLA_BRPORT_MCAST_N_GROUPS] = { .type = NLA_REJECT },
>> + [IFLA_BRPORT_MCAST_MAX_GROUPS] = { .type = NLA_U32 },
>> };
>>
>> /* Change the state of the port and notify spanning tree */
>> @@ -1017,6 +1025,13 @@ static int br_setport(struct net_bridge_port *p, struct nlattr *tb[],
>> if (err)
>> return err;
>> }
>> +
>> + if (tb[IFLA_BRPORT_MCAST_MAX_GROUPS]) {
>> + u32 max_groups;
>> +
>> + max_groups = nla_get_u32(tb[IFLA_BRPORT_MCAST_MAX_GROUPS]);
>> + br_multicast_port_ngroups_set_max(p, max_groups);
>> + }
>> #endif
>>
>> if (tb[IFLA_BRPORT_GROUP_FWD_MASK]) {
>> diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
>> index 49f411a0a1f1..98f3836efb84 100644
>> --- a/net/bridge/br_private.h
>> +++ b/net/bridge/br_private.h
>> @@ -978,6 +978,18 @@ void br_multicast_uninit_stats(struct net_bridge *br);
>> void br_multicast_get_stats(const struct net_bridge *br,
>> const struct net_bridge_port *p,
>> struct br_mcast_stats *dest);
>> +u32 br_multicast_port_ngroups_get(const struct net_bridge_port *port);
>> +int br_multicast_vlan_ngroups_get(struct net_bridge *br,
>> + const struct net_bridge_vlan *v,
>> + u32 *n);
>> +void br_multicast_port_ngroups_set_max(struct net_bridge_port *port, u32 max);
>> +int br_multicast_vlan_ngroups_set_max(struct net_bridge *br,
>> + struct net_bridge_vlan *v, u32 max,
>> + struct netlink_ext_ack *extack);
>> +u32 br_multicast_port_ngroups_get_max(const struct net_bridge_port *port);
>> +int br_multicast_vlan_ngroups_get_max(struct net_bridge *br,
>> + const struct net_bridge_vlan *v,
>> + u32 *max);
>> void br_mdb_init(void);
>> void br_mdb_uninit(void);
>> void br_multicast_host_join(const struct net_bridge_mcast *brmctx,
>> @@ -1761,7 +1773,8 @@ static inline u16 br_vlan_flags(const struct net_bridge_vlan *v, u16 pvid)
>> #ifdef CONFIG_BRIDGE_VLAN_FILTERING
>> bool br_vlan_opts_eq_range(const struct net_bridge_vlan *v_curr,
>> const struct net_bridge_vlan *range_end);
>> -bool br_vlan_opts_fill(struct sk_buff *skb, const struct net_bridge_vlan *v);
>> +bool br_vlan_opts_fill(struct sk_buff *skb, const struct net_bridge_vlan *v,
>> + const struct net_bridge_port *p);
>> size_t br_vlan_opts_nl_size(void);
>> int br_vlan_process_options(const struct net_bridge *br,
>> const struct net_bridge_port *p,
>> diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
>> index bc75fa1e4666..8a3dbc09ba38 100644
>> --- a/net/bridge/br_vlan.c
>> +++ b/net/bridge/br_vlan.c
>> @@ -1816,6 +1816,7 @@ static bool br_vlan_stats_fill(struct sk_buff *skb,
>> /* v_opts is used to dump the options which must be equal in the whole range */
>> static bool br_vlan_fill_vids(struct sk_buff *skb, u16 vid, u16 vid_range,
>> const struct net_bridge_vlan *v_opts,
>> + const struct net_bridge_port *p,
>> u16 flags,
>> bool dump_stats)
>> {
>> @@ -1842,7 +1843,7 @@ static bool br_vlan_fill_vids(struct sk_buff *skb, u16 vid, u16 vid_range,
>> goto out_err;
>>
>> if (v_opts) {
>> - if (!br_vlan_opts_fill(skb, v_opts))
>> + if (!br_vlan_opts_fill(skb, v_opts, p))
>> goto out_err;
>>
>> if (dump_stats && !br_vlan_stats_fill(skb, v_opts))
>> @@ -1925,7 +1926,7 @@ void br_vlan_notify(const struct net_bridge *br,
>> goto out_kfree;
>> }
>>
>> - if (!br_vlan_fill_vids(skb, vid, vid_range, v, flags, false))
>> + if (!br_vlan_fill_vids(skb, vid, vid_range, v, p, flags, false))
>> goto out_err;
>>
>> nlmsg_end(skb, nlh);
>> @@ -2030,7 +2031,7 @@ static int br_vlan_dump_dev(const struct net_device *dev,
>>
>> if (!br_vlan_fill_vids(skb, range_start->vid,
>> range_end->vid, range_start,
>> - vlan_flags, dump_stats)) {
>> + p, vlan_flags, dump_stats)) {
>> err = -EMSGSIZE;
>> break;
>> }
>> @@ -2056,7 +2057,7 @@ static int br_vlan_dump_dev(const struct net_device *dev,
>> else if (!dump_global &&
>> !br_vlan_fill_vids(skb, range_start->vid,
>> range_end->vid, range_start,
>> - br_vlan_flags(range_start, pvid),
>> + p, br_vlan_flags(range_start, pvid),
>> dump_stats))
>> err = -EMSGSIZE;
>> }
>> @@ -2131,6 +2132,8 @@ static const struct nla_policy br_vlan_db_policy[BRIDGE_VLANDB_ENTRY_MAX + 1] =
>> [BRIDGE_VLANDB_ENTRY_STATE] = { .type = NLA_U8 },
>> [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] = { .type = NLA_NESTED },
>> [BRIDGE_VLANDB_ENTRY_MCAST_ROUTER] = { .type = NLA_U8 },
>> + [BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS] = { .type = NLA_REJECT },
>> + [BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS] = { .type = NLA_U32 },
>> };
>>
>> static int br_vlan_rtm_process_one(struct net_device *dev,
>> diff --git a/net/bridge/br_vlan_options.c b/net/bridge/br_vlan_options.c
>> index a2724d03278c..43d8f11ce79c 100644
>> --- a/net/bridge/br_vlan_options.c
>> +++ b/net/bridge/br_vlan_options.c
>> @@ -48,7 +48,8 @@ bool br_vlan_opts_eq_range(const struct net_bridge_vlan *v_curr,
>> curr_mc_rtr == range_mc_rtr;
>> }
>>
>> -bool br_vlan_opts_fill(struct sk_buff *skb, const struct net_bridge_vlan *v)
>> +bool br_vlan_opts_fill(struct sk_buff *skb, const struct net_bridge_vlan *v,
>> + const struct net_bridge_port *p)
>> {
>> if (nla_put_u8(skb, BRIDGE_VLANDB_ENTRY_STATE, br_vlan_get_state(v)) ||
>> !__vlan_tun_put(skb, v))
>> @@ -58,6 +59,20 @@ bool br_vlan_opts_fill(struct sk_buff *skb, const struct net_bridge_vlan *v)
>> if (nla_put_u8(skb, BRIDGE_VLANDB_ENTRY_MCAST_ROUTER,
>> br_vlan_multicast_router(v)))
>> return false;
>> + if (p && !br_multicast_port_ctx_vlan_disabled(&v->port_mcast_ctx)) {
>> + u32 mdb_max_entries;
>> + u32 mdb_n_entries;
>> +
>> + if (br_multicast_vlan_ngroups_get(p->br, v, &mdb_n_entries) ||
>> + nla_put_u32(skb, BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS,
>> + mdb_n_entries))
>> + return false;
>> + if (br_multicast_vlan_ngroups_get_max(p->br, v,
>> + &mdb_max_entries) ||
>> + nla_put_u32(skb, BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS,
>> + mdb_max_entries))
>> + return false;
>> + }
>> #endif
>>
>> return true;
>> @@ -70,6 +85,8 @@ size_t br_vlan_opts_nl_size(void)
>> + nla_total_size(sizeof(u32)) /* BRIDGE_VLANDB_TINFO_ID */
>> #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
>> + nla_total_size(sizeof(u8)) /* BRIDGE_VLANDB_ENTRY_MCAST_ROUTER */
>> + + nla_total_size(sizeof(u32)) /* BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS */
>> + + nla_total_size(sizeof(u32)) /* BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS */
>> #endif
>> + 0;
>> }
>> @@ -212,6 +229,20 @@ static int br_vlan_process_one_opts(const struct net_bridge *br,
>> return err;
>> *changed = true;
>> }
>> + if (tb[BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS]) {
>> + u32 val;
>> +
>> + if (!p) {
>> + NL_SET_ERR_MSG_MOD(extack, "Can't set mcast_max_groups for non-port vlans");
>> + return -EINVAL;
>> + }
>> +
>> + val = nla_get_u32(tb[BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS]);
>> + err = br_multicast_vlan_ngroups_set_max(p->br, v, val, extack);
>> + if (err)
>> + return err;
>> + *changed = true;
>> + }
>> #endif
>>
>> return 0;
>> diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
>> index 64289bc98887..e786255a8360 100644
>> --- a/net/core/rtnetlink.c
>> +++ b/net/core/rtnetlink.c
>> @@ -58,7 +58,7 @@
>> #include "dev.h"
>>
>> #define RTNL_MAX_TYPE 50
>> -#define RTNL_SLAVE_MAX_TYPE 40
>> +#define RTNL_SLAVE_MAX_TYPE 42
>>
>> struct rtnl_link {
>> rtnl_doit_func doit;
>
Powered by blists - more mailing lists