lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 3 Apr 2023 11:52:29 -0500
From:   Andrew Halaney <ahalaney@...hat.com>
To:     linux-kernel@...r.kernel.org
Cc:     agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, vkoul@...nel.org,
        bhupesh.sharma@...aro.org, wens@...e.org, jernej.skrabec@...il.com,
        samuel@...lland.org, mturquette@...libre.com,
        peppe.cavallaro@...com, alexandre.torgue@...s.st.com,
        joabreu@...opsys.com, mcoquelin.stm32@...il.com,
        richardcochran@...il.com, linux@...linux.org.uk, veekhee@...le.com,
        tee.min.tan@...ux.intel.com, mohammad.athari.ismail@...el.com,
        jonathanh@...dia.com, ruppala@...dia.com, bmasney@...hat.com,
        andrey.konovalov@...aro.org, linux-arm-msm@...r.kernel.org,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, ncai@...cinc.com,
        jsuraj@....qualcomm.com, hisunil@...cinc.com, echanude@...hat.com
Subject: [PATCH net-next v3 12/12] net: stmmac: dwmac-qcom-ethqos: Add EMAC3
 support

Add the new programming sequence needed for EMAC3 based platforms such
as the sc8280xp family.

Signed-off-by: Andrew Halaney <ahalaney@...hat.com>
---

This originally did not make it to the list somehow, but was intended
to. Apologies in advance if appending it like this is inappropriate, but
after thinking about it more I think that works better than doing a
RESEND (and making current comments difficult to track) or spinning a
v4, without addressing comments in this version entirely. I'm eager to
get some feedback on this, and I've got some property damage at home
to deal with so I'm sending it this way instead of waiting for further
advice on how to deal with me dropping it on accident.

I know the Qualcomm team has looked at earlier versions of this offlist,
but I'd appreciate any feedback I can get (good or bad) for this patch
since it is a lot of programming that I took entirely from downstream
after modifying to be more upstream appropriate (i.e., I do not have
documentation for the IP, be it this implementation or the generic
docs).

Thanks in advance and sorry again about it getting dropped from the
original submission!

Changes since v2:
    * Adjust to the new method of defining the MTL/DMA offsets in the
      platform glue

Changes since v1:
    * None

 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 121 +++++++++++++++---
 1 file changed, 100 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index ec9e93147716..f47ae62a5662 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -11,6 +11,7 @@
 
 #define RGMII_IO_MACRO_CONFIG		0x0
 #define SDCC_HC_REG_DLL_CONFIG		0x4
+#define SDCC_TEST_CTL			0x8
 #define SDCC_HC_REG_DDR_CONFIG		0xC
 #define SDCC_HC_REG_DLL_CONFIG2		0x10
 #define SDC4_STATUS			0x14
@@ -49,6 +50,7 @@
 #define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY	GENMASK(26, 21)
 #define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE	GENMASK(29, 27)
 #define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN	BIT(30)
+#define SDCC_DDR_CONFIG_TCXO_CYCLES_CNT		GENMASK(11, 9)
 #define SDCC_DDR_CONFIG_PRG_RCLK_DLY		GENMASK(8, 0)
 
 /* SDCC_HC_REG_DLL_CONFIG2 fields */
@@ -79,6 +81,8 @@ struct ethqos_emac_driver_data {
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
+	bool has_emac3;
+	struct dwmac4_addrs dwmac4_addrs;
 };
 
 struct qcom_ethqos {
@@ -92,6 +96,7 @@ struct qcom_ethqos {
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
+	bool has_emac3;
 };
 
 static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -184,6 +189,7 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
 	.por = emac_v2_3_0_por,
 	.num_por = ARRAY_SIZE(emac_v2_3_0_por),
 	.rgmii_config_loopback_en = true,
+	.has_emac3 = false,
 };
 
 static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -199,6 +205,39 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
 	.por = emac_v2_1_0_por,
 	.num_por = ARRAY_SIZE(emac_v2_1_0_por),
 	.rgmii_config_loopback_en = false,
+	.has_emac3 = false,
+};
+
+static const struct ethqos_emac_por emac_v3_0_0_por[] = {
+	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x40c01343 },
+	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642c },
+	{ .offset = SDCC_HC_REG_DDR_CONFIG,	.value = 0x80040800 },
+	{ .offset = SDCC_HC_REG_DLL_CONFIG2,	.value = 0x00200000 },
+	{ .offset = SDCC_USR_CTL,		.value = 0x00010800 },
+	{ .offset = RGMII_IO_MACRO_CONFIG2,	.value = 0x00002060 },
+};
+
+static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
+	.por = emac_v3_0_0_por,
+	.num_por = ARRAY_SIZE(emac_v3_0_0_por),
+	.rgmii_config_loopback_en = false,
+	.has_emac3 = true,
+	.dwmac4_addrs = {
+		.dma_chan = 0x00008100,
+		.dma_chan_offset = 0x1000,
+		.mtl_chan = 0x00008000,
+		.mtl_chan_offset = 0x1000,
+		.mtl_ets_ctrl = 0x00008010,
+		.mtl_ets_ctrl_offset = 0x1000,
+		.mtl_txq_weight = 0x00008018,
+		.mtl_txq_weight_offset = 0x1000,
+		.mtl_send_slp_cred = 0x0000801c,
+		.mtl_send_slp_cred_offset = 0x1000,
+		.mtl_high_cred = 0x00008020,
+		.mtl_high_cred_offset = 0x1000,
+		.mtl_low_cred = 0x00008024,
+		.mtl_low_cred_offset = 0x1000,
+	},
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -222,11 +261,13 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_EN,
 		      SDCC_DLL_CONFIG_DLL_EN, SDCC_HC_REG_DLL_CONFIG);
 
-	rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
-		      0, SDCC_HC_REG_DLL_CONFIG);
+	if (!ethqos->has_emac3) {
+		rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
+			      0, SDCC_HC_REG_DLL_CONFIG);
 
-	rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
-		      0, SDCC_HC_REG_DLL_CONFIG);
+		rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
+			      0, SDCC_HC_REG_DLL_CONFIG);
+	}
 
 	/* Wait for CK_OUT_EN clear */
 	do {
@@ -261,18 +302,20 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
 		      SDCC_DLL_CONFIG2_DDR_CAL_EN, SDCC_HC_REG_DLL_CONFIG2);
 
-	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
-		      0, SDCC_HC_REG_DLL_CONFIG2);
+	if (!ethqos->has_emac3) {
+		rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
+			      0, SDCC_HC_REG_DLL_CONFIG2);
 
-	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
-		      0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
+		rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
+			      0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
 
-	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
-		      BIT(2), SDCC_HC_REG_DLL_CONFIG2);
+		rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
+			      BIT(2), SDCC_HC_REG_DLL_CONFIG2);
 
-	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
-		      SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
-		      SDCC_HC_REG_DLL_CONFIG2);
+		rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+			      SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+			      SDCC_HC_REG_DLL_CONFIG2);
+	}
 
 	return 0;
 }
@@ -327,9 +370,17 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 			      RGMII_CONFIG2_RX_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG2);
 
-		/* Set PRG_RCLK_DLY to 57 for 1.8 ns delay */
-		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-			      57, SDCC_HC_REG_DDR_CONFIG);
+		/* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
+		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
+		 */
+		if (ethqos->has_emac3)
+			/* 0.9 ns */
+			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+				      115, SDCC_HC_REG_DDR_CONFIG);
+		else
+			/* 1.8 ns */
+			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+				      57, SDCC_HC_REG_DDR_CONFIG);
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
@@ -355,8 +406,15 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 			      BIT(6), RGMII_IO_MACRO_CONFIG);
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 			      0, RGMII_IO_MACRO_CONFIG2);
-		rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-			      0, RGMII_IO_MACRO_CONFIG2);
+
+		if (ethqos->has_emac3)
+			rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+				      RGMII_CONFIG2_RX_PROG_SWAP,
+				      RGMII_IO_MACRO_CONFIG2);
+		else
+			rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+				      0, RGMII_IO_MACRO_CONFIG2);
+
 		/* Write 0x5 to PRG_RCLK_DLY_CODE */
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
 			      (BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -389,8 +447,13 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 			      RGMII_IO_MACRO_CONFIG);
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 			      0, RGMII_IO_MACRO_CONFIG2);
-		rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
-			      0, RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->has_emac3)
+			rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+				      RGMII_CONFIG2_RX_PROG_SWAP,
+				      RGMII_IO_MACRO_CONFIG2);
+		else
+			rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+				      0, RGMII_IO_MACRO_CONFIG2);
 		/* Write 0x5 to PRG_RCLK_DLY_CODE */
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
 			      (BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -433,6 +496,17 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG_PDN,
 		      SDCC_DLL_CONFIG_PDN, SDCC_HC_REG_DLL_CONFIG);
 
+	if (ethqos->has_emac3) {
+		if (ethqos->speed == SPEED_1000) {
+			rgmii_writel(ethqos, 0x1800000, SDCC_TEST_CTL);
+			rgmii_writel(ethqos, 0x2C010800, SDCC_USR_CTL);
+			rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+		} else {
+			rgmii_writel(ethqos, 0x40010800, SDCC_USR_CTL);
+			rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+		}
+	}
+
 	/* Clear DLL_RST */
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_RST, 0,
 		      SDCC_HC_REG_DLL_CONFIG);
@@ -452,7 +526,9 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
 			      SDCC_HC_REG_DLL_CONFIG);
 
 		/* Set USR_CTL bit 26 with mask of 3 bits */
-		rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26), SDCC_USR_CTL);
+		if (!ethqos->has_emac3)
+			rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26),
+				      SDCC_USR_CTL);
 
 		/* wait for DLL LOCK */
 		do {
@@ -547,6 +623,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->por = data->por;
 	ethqos->num_por = data->num_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
+	ethqos->has_emac3 = data->has_emac3;
 
 	ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_clk)) {
@@ -566,6 +643,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
 	plat_dat->dump_debug_regs = rgmii_dump;
 	plat_dat->has_gmac4 = 1;
+	plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
 	plat_dat->pmt = 1;
 	plat_dat->tso_en = of_property_read_bool(np, "snps,tso");
 	if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
@@ -603,6 +681,7 @@ static int qcom_ethqos_remove(struct platform_device *pdev)
 
 static const struct of_device_id qcom_ethqos_match[] = {
 	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
+	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_v3_0_0_data},
 	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},
 	{ }
 };
-- 
2.39.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ