| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 19 Jul 2023 22:02:01 +0000
From: Thinh Tran <thinhtr@...ux.vnet.ibm.com>
To: kuba@...nel.org
Cc: aelior@...vell.com, davem@...emloft.net, edumazet@...gle.com,
manishc@...vell.com, netdev@...r.kernel.org, pabeni@...hat.com,
skalluru@...vell.com, drc@...ux.vnet.ibm.com, abdhalee@...ibm.com,
Thinh Tran <thinhtr@...ux.vnet.ibm.com>
Subject: [Patch v3] bnx2x: Fix error recovering in switch configuration
As the BCM57810 and other I/O adapters are connected
through a PCIe switch, the bnx2x driver causes unexpected
system hang/crash while handling PCIe switch errors, if
its error handler is called after other drivers' handlers.
In this case, after numbers of bnx2x_tx_timout(), the
bnx2x_nic_unload() is called, frees up resources and
calls bnx2x_napi_disable(). Then when EEH calls its
error handler, the bnx2x_io_error_detected() and
bnx2x_io_slot_reset() also calling bnx2x_napi_disable()
and freeing the resources.
Signed-off-by: Thinh Tran <thinhtr@...ux.vnet.ibm.com>
Reviewed-by: Manish Chopra <manishc@...vell.com>
Tested-by: Abdul Haleem <abdhalee@...ibm.com>
Tested-by: David Christensen <drc@...ux.vnet.ibm.com>
v3:
- no changes, just repatched to the latest driver level
- updated the reviewed-by Manish in October, 2022
v2:
- Check the state of the NIC before calling disable nappi
and freeing the IRQ
- Prevent recurrence of TX timeout by turning off the carrier,
calling netif_carrier_off() in bnx2x_tx_timeout()
- Check and bail out early if fp->page_pool already freed
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +
.../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 27 +++++++++----
.../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 3 ++
.../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 38 +++++++++----------
.../net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 17 +++++----
5 files changed, 53 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 8bcde0a6e011..e2a4e1088b7f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1508,6 +1508,8 @@ struct bnx2x {
bool cnic_loaded;
struct cnic_eth_dev *(*cnic_probe)(struct net_device *);
+ bool nic_stopped;
+
/* Flag that indicates that we can start looking for FCoE L2 queue
* completions in the default status block.
*/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 6ea5521074d3..97364089ff80 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2715,6 +2715,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
bnx2x_add_all_napi(bp);
DP(NETIF_MSG_IFUP, "napi added\n");
bnx2x_napi_enable(bp);
+ bp->nic_stopped = false;
if (IS_PF(bp)) {
/* set pf load just before approaching the MCP */
@@ -2960,6 +2961,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
load_error1:
bnx2x_napi_disable(bp);
bnx2x_del_all_napi(bp);
+ bp->nic_stopped = true;
/* clear pf_load status, as it was already set */
if (IS_PF(bp))
@@ -3095,14 +3097,17 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
if (!CHIP_IS_E1x(bp))
bnx2x_pf_disable(bp);
- /* Disable HW interrupts, NAPI */
- bnx2x_netif_stop(bp, 1);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
- if (CNIC_LOADED(bp))
- bnx2x_del_all_napi_cnic(bp);
- /* Release IRQs */
- bnx2x_free_irq(bp);
+ if (!bp->nic_stopped) {
+ /* Disable HW interrupts, NAPI */
+ bnx2x_netif_stop(bp, 1);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
+ if (CNIC_LOADED(bp))
+ bnx2x_del_all_napi_cnic(bp);
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+ bp->nic_stopped = true;
+ }
/* Report UNLOAD_DONE to MCP */
bnx2x_send_unload_done(bp, false);
@@ -4987,6 +4992,12 @@ void bnx2x_tx_timeout(struct net_device *dev, unsigned int txqueue)
{
struct bnx2x *bp = netdev_priv(dev);
+ /* Immediately indicate link as down */
+ bp->link_vars.link_up = 0;
+ bp->force_link_down = true;
+ netif_carrier_off(dev);
+ BNX2X_ERR("Indicating link is down due to Tx-timeout\n");
+
/* We want the information of the dump logged,
* but calling bnx2x_panic() would kill all chances of recovery.
*/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index d8b1824c334d..bc0dee25b804 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1015,6 +1015,9 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
{
int i;
+ if (!fp->page_pool.page)
+ return;
+
if (fp->mode == TPA_MODE_DISABLED)
return;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 1e7a6f1d4223..adb1c7a2c367 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9474,15 +9474,18 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
}
}
- /* Disable HW interrupts, NAPI */
- bnx2x_netif_stop(bp, 1);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
- if (CNIC_LOADED(bp))
- bnx2x_del_all_napi_cnic(bp);
+ if (!bp->nic_stopped) {
+ /* Disable HW interrupts, NAPI */
+ bnx2x_netif_stop(bp, 1);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
+ if (CNIC_LOADED(bp))
+ bnx2x_del_all_napi_cnic(bp);
- /* Release IRQs */
- bnx2x_free_irq(bp);
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+ bp->nic_stopped = true;
+ }
/* Reset the chip, unless PCI function is offline. If we reach this
* point following a PCI error handling, it means device is really
@@ -10273,12 +10276,6 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work)
bp->sp_rtnl_state = 0;
smp_mb();
- /* Immediately indicate link as down */
- bp->link_vars.link_up = 0;
- bp->force_link_down = true;
- netif_carrier_off(bp->dev);
- BNX2X_ERR("Indicating link is down due to Tx-timeout\n");
-
bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
/* When ret value shows failure of allocation failure,
* the nic is rebooted again. If open still fails, a error
@@ -14238,13 +14235,16 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
}
bnx2x_drain_tx_queues(bp);
bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
- bnx2x_netif_stop(bp, 1);
- bnx2x_del_all_napi(bp);
+ if (!bp->nic_stopped) {
+ bnx2x_netif_stop(bp, 1);
+ bnx2x_del_all_napi(bp);
- if (CNIC_LOADED(bp))
- bnx2x_del_all_napi_cnic(bp);
+ if (CNIC_LOADED(bp))
+ bnx2x_del_all_napi_cnic(bp);
- bnx2x_free_irq(bp);
+ bnx2x_free_irq(bp);
+ bp->nic_stopped = true;
+ }
/* Report UNLOAD_DONE to MCP */
bnx2x_send_unload_done(bp, true);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 0657a0f5170f..8946a931e87e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -529,13 +529,16 @@ void bnx2x_vfpf_close_vf(struct bnx2x *bp)
bnx2x_vfpf_finalize(bp, &req->first_tlv);
free_irq:
- /* Disable HW interrupts, NAPI */
- bnx2x_netif_stop(bp, 0);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
-
- /* Release IRQs */
- bnx2x_free_irq(bp);
+ if (!bp->nic_stopped) {
+ /* Disable HW interrupts, NAPI */
+ bnx2x_netif_stop(bp, 0);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
+
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+ bp->nic_stopped = true;
+ }
}
static void bnx2x_leading_vfq_init(struct bnx2x *bp, struct bnx2x_virtf *vf,
--
2.25.1
Powered by blists - more mailing lists