netdev - Re: PROBLEM: Broken or delayed ethernet on Xilinx ZCU104 since 5.18 (regression)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Sat, 5 Aug 2023 03:34:22 -0400
From: Nick Bowler <nbowler@...conx.ca>
To: Andrew Lunn <andrew@...n.ch>
Cc: Rob Herring <robh@...nel.org>, Saravana Kannan <saravanak@...gle.com>, linux-kernel@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org, 
	regressions@...ts.linux.dev
Subject: Re: PROBLEM: Broken or delayed ethernet on Xilinx ZCU104 since 5.18 (regression)

On 2023-08-05, Andrew Lunn <andrew@...n.ch> wrote:
>> > It was also commented out before that change. It could be that gpio
>> > controller is missing. Do you have the driver for the tca6416 in
>> > your kernel configuration?
>>
>> I have CONFIG_GPIO_PCA953X=y which I think is the correct driver?
>
> It does appear to be the correct driver. But check if it has
> loaded. It is an i2c device, so maybe you are missing the I2C bus
> master device?

That's it!  I needed to set

  CONFIG_I2C_CADENCE=y

and now things are working again!

Thanks,
  Nick