netdev - Re: Re: [PATCH v6 net-next 05/14] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 16 Feb 2024 10:18:10 +0100
From: Gregor Herburger <gregor.herburger@...tq-group.com>
To: Dimitri Fedrau <dima.fedrau@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Stefan Eichenberger <eichest@...il.com>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: Re: [PATCH v6 net-next 05/14] net: phy: marvell-88q2xxx: add driver for
 the Marvell 88Q2220 PHY

On Thu, Feb 15, 2024 at 09:24:03PM +0100, Dimitri Fedrau wrote:
> > Hi Dimitri,
> >
> Hi Gregor,
> 
> > On Tue, Feb 13, 2024 at 10:39:44PM +0100, Dimitri Fedrau wrote:
> > >  static struct phy_driver mv88q2xxx_driver[] = {
> > >  	{
> > >  		.phy_id			= MARVELL_PHY_ID_88Q2110,
> > > @@ -255,12 +439,26 @@ static struct phy_driver mv88q2xxx_driver[] = {
> > >  		.get_sqi		= mv88q2xxx_get_sqi,
> > >  		.get_sqi_max		= mv88q2xxx_get_sqi_max,
> > >  	},
> > > +	{
> > > +		PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0),
> > 
> > I tested the series on a 88Q2220 REV B1 (which is id 0x002b0b22). The
> > driver works fine on this revision.
> > 
> > I understand that in the Marvell API the initialization for Rev B0 and
> > B1 differ. For B0 some additional init sequence is executed. I did not look
> > into the details of this sequence. However this patch seems to work on
> > Rev B1.
> >
> > Would you consider adding compatibility for Rev B1 and following? I
> > tested with:
> > 		.phy_id			= MARVELL_PHY_ID_88Q2220,
> > 		.phy_id_mask		= MARVELL_PHY_ID_MASK,
> >
> 
> thanks for testing. I would stick to the exact initialization sequence
> provided by the Marvell API. Registers and bits are mostly undocumented
> and I think it is safest this way. Besides that it should be relatively
> easy to add the support for rev. B1 by just adding the init sequence for
> it.

Ok. I will have an closer look at the marvell API and eventually come up
with a patch for Rev. B1.

There is also a Rev.B2 for which I cannot find any init sequence. But
Rev. B1 will no longer be produced so I need a solution for B2
eventually.

Best regards
Gregor

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/