| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 18 Feb 2024 11:06:58 -0600
From: Andrew Lunn <andrew@...n.ch>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Ariel Elior <aelior@...vell.com>,
Manish Chopra <manishc@...vell.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>
Cc: linux-usb@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, intel-wired-lan@...ts.osuosl.org,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next v4 1/9] net: usb: r8152: Use linkmode helpers for
EEE
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/usb/Kconfig | 1 +
drivers/net/usb/r8152.c | 33 ++++++++++++++++-----------------
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3fd7dccf0f9c..3c360d4f0635 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -99,6 +99,7 @@ config USB_RTL8150
config USB_RTL8152
tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
select MII
+ select PHYLIB
select CRC32
select CRYPTO
select CRYPTO_HASH
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3d806b3ff425..6d0dc2c967c4 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -10,6 +10,7 @@
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
+#include <linux/phy.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
@@ -8924,30 +8925,29 @@ static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
static int r8152_get_eee(struct r8152 *tp, struct ethtool_keee *eee)
{
- u32 lp, adv, supported = 0;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
u16 val;
val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
- supported = mmd_eee_cap_to_ethtool_sup_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->supported, val);
val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
- adv = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->advertised, val);
val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
- lp = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->lp_advertised, val);
eee->eee_enabled = tp->eee_en;
- eee->eee_active = !!(supported & adv & lp);
- eee->supported_u32 = supported;
- eee->advertised_u32 = tp->eee_adv;
- eee->lp_advertised_u32 = lp;
+
+ linkmode_and(common, eee->advertised, eee->lp_advertised);
+ eee->eee_active = phy_check_valid(tp->speed, tp->duplex, common);
return 0;
}
static int r8152_set_eee(struct r8152 *tp, struct ethtool_keee *eee)
{
- u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised_u32);
+ u16 val = linkmode_to_mii_eee_cap1_t(eee->advertised);
tp->eee_en = eee->eee_enabled;
tp->eee_adv = val;
@@ -8959,23 +8959,22 @@ static int r8152_set_eee(struct r8152 *tp, struct ethtool_keee *eee)
static int r8153_get_eee(struct r8152 *tp, struct ethtool_keee *eee)
{
- u32 lp, adv, supported = 0;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
u16 val;
val = ocp_reg_read(tp, OCP_EEE_ABLE);
- supported = mmd_eee_cap_to_ethtool_sup_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->supported, val);
val = ocp_reg_read(tp, OCP_EEE_ADV);
- adv = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->advertised, val);
val = ocp_reg_read(tp, OCP_EEE_LPABLE);
- lp = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(eee->lp_advertised, val);
eee->eee_enabled = tp->eee_en;
- eee->eee_active = !!(supported & adv & lp);
- eee->supported_u32 = supported;
- eee->advertised_u32 = tp->eee_adv;
- eee->lp_advertised_u32 = lp;
+
+ linkmode_and(common, eee->advertised, eee->lp_advertised);
+ eee->eee_active = phy_check_valid(tp->speed, tp->duplex, common);
return 0;
}
--
2.43.0
Powered by blists - more mailing lists