| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Apr 2024 10:03:53 +0900
From: FUJITA Tomonori <fujita.tomonori@...il.com>
To: netdev@...r.kernel.org
Cc: andrew@...n.ch,
horms@...nel.org
Subject: [PATCH net-next v2 5/6] net: tn40xx: add mdio bus support
This patch adds supports for mdio bus. A later path adds PHYLIB
support on the top of this.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@...il.com>
---
drivers/net/ethernet/tehuti/Makefile | 2 +-
drivers/net/ethernet/tehuti/tn40.c | 7 +-
drivers/net/ethernet/tehuti/tn40.h | 4 +
drivers/net/ethernet/tehuti/tn40_mdio.c | 129 ++++++++++++++++++++++++
4 files changed, 140 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/tehuti/tn40_mdio.c
diff --git a/drivers/net/ethernet/tehuti/Makefile b/drivers/net/ethernet/tehuti/Makefile
index 1c468d99e476..7a0fe586a243 100644
--- a/drivers/net/ethernet/tehuti/Makefile
+++ b/drivers/net/ethernet/tehuti/Makefile
@@ -5,5 +5,5 @@
obj-$(CONFIG_TEHUTI) += tehuti.o
-tn40xx-y := tn40.o
+tn40xx-y := tn40.o tn40_mdio.o
obj-$(CONFIG_TEHUTI_TN40) += tn40xx.o
diff --git a/drivers/net/ethernet/tehuti/tn40.c b/drivers/net/ethernet/tehuti/tn40.c
index f676fc6e1d3a..0b8a063adb8c 100644
--- a/drivers/net/ethernet/tehuti/tn40.c
+++ b/drivers/net/ethernet/tehuti/tn40.c
@@ -1760,8 +1760,13 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_unset_drvdata;
}
- priv->stats_flag = ((read_reg(priv, FPGA_VER) & 0xFFF) != 308);
+ ret = tn40_mdiobus_init(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize mdio bus.\n");
+ goto err_free_irq;
+ }
+ priv->stats_flag = ((read_reg(priv, FPGA_VER) & 0xFFF) != 308);
priv->isr_mask =
IR_RX_FREE_0 | IR_LNKCHG0 | IR_PSE | IR_TMR0 | IR_RX_DESC_0 |
IR_TX_FREE_0 | IR_TMR1;
diff --git a/drivers/net/ethernet/tehuti/tn40.h b/drivers/net/ethernet/tehuti/tn40.h
index 2c24f75cab03..0f39dc70f37c 100644
--- a/drivers/net/ethernet/tehuti/tn40.h
+++ b/drivers/net/ethernet/tehuti/tn40.h
@@ -11,6 +11,7 @@
#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@@ -176,6 +177,7 @@ struct tn40_priv {
char *b0_va; /* Virtual address of buffer */
struct rx_page_table rx_page_table;
+ struct mii_bus *mdio;
};
/* RX FREE descriptor - 64bit */
@@ -262,4 +264,6 @@ static inline void write_reg(struct tn40_priv *priv, u32 reg, u32 val)
writel(val, priv->regs + reg);
}
+int tn40_mdiobus_init(struct tn40_priv *priv);
+
#endif /* _TN40XX_H */
diff --git a/drivers/net/ethernet/tehuti/tn40_mdio.c b/drivers/net/ethernet/tehuti/tn40_mdio.c
new file mode 100644
index 000000000000..c00421427f20
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/tn40_mdio.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) Tehuti Networks Ltd. */
+
+#include "tn40.h"
+
+static void mdio_set_speed(struct tn40_priv *priv, u32 speed)
+{
+ void __iomem *regs = priv->regs;
+ int mdio_cfg;
+
+ mdio_cfg = readl(regs + REG_MDIO_CMD_STAT);
+ if (speed == 1)
+ mdio_cfg = (0x7d << 7) | 0x08; /* 1MHz */
+ else
+ mdio_cfg = 0xA08; /* 6MHz */
+ mdio_cfg |= (1 << 6);
+ writel(mdio_cfg, regs + REG_MDIO_CMD_STAT);
+ msleep(100);
+}
+
+static u32 mdio_stat(struct tn40_priv *priv)
+{
+ void __iomem *regs = priv->regs;
+
+ return readl(regs + REG_MDIO_CMD_STAT);
+}
+
+static int mdio_get(struct tn40_priv *priv, u32 *val)
+{
+ u32 stat;
+ int ret;
+
+ ret = readx_poll_timeout_atomic(mdio_stat, priv, stat,
+ GET_MDIO_BUSY(stat) == 0, 10, 10000);
+ return ret;
+}
+
+static int tn40_mdio_read(struct tn40_priv *priv, int port, int device,
+ u16 regnum)
+{
+ void __iomem *regs = priv->regs;
+ u32 tmp_reg, i;
+
+ /* wait until MDIO is not busy */
+ if (mdio_get(priv, NULL))
+ return -EIO;
+
+ i = ((device & 0x1F) | ((port & 0x1F) << 5));
+ writel(i, regs + REG_MDIO_CMD);
+ writel((u32)regnum, regs + REG_MDIO_ADDR);
+ if (mdio_get(priv, NULL))
+ return -EIO;
+
+ writel(((1 << 15) | i), regs + REG_MDIO_CMD);
+ /* read CMD_STAT until not busy */
+ if (mdio_get(priv, NULL))
+ return -EIO;
+
+ tmp_reg = readl(regs + REG_MDIO_DATA);
+ return lower_16_bits(tmp_reg);
+}
+
+static int tn40_mdio_write(struct tn40_priv *priv, int port, int device,
+ u16 regnum, u16 data)
+{
+ void __iomem *regs = priv->regs;
+ u32 tmp_reg = 0;
+ int ret;
+
+ /* wait until MDIO is not busy */
+ if (mdio_get(priv, NULL))
+ return -EIO;
+ writel(((device & 0x1F) | ((port & 0x1F) << 5)), regs + REG_MDIO_CMD);
+ writel((u32)regnum, regs + REG_MDIO_ADDR);
+ if (mdio_get(priv, NULL))
+ return -EIO;
+ writel((u32)data, regs + REG_MDIO_DATA);
+ /* read CMD_STAT until not busy */
+ ret = mdio_get(priv, &tmp_reg);
+ if (ret)
+ return -EIO;
+
+ if (GET_MDIO_RD_ERR(tmp_reg)) {
+ dev_err(&priv->pdev->dev, "MDIO error after write command\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static int mdio_read(struct mii_bus *mii_bus, int addr, int devnum, int regnum)
+{
+ return tn40_mdio_read(mii_bus->priv, addr, devnum, regnum);
+}
+
+static int mdio_write(struct mii_bus *mii_bus, int addr, int devnum,
+ int regnum, u16 val)
+{
+ return tn40_mdio_write(mii_bus->priv, addr, devnum, regnum, val);
+}
+
+int tn40_mdiobus_init(struct tn40_priv *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ struct mii_bus *bus;
+ int ret;
+
+ bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = TN40_DRV_NAME;
+ bus->parent = &pdev->dev;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "tn40xx-%x-%x",
+ pci_domain_nr(pdev->bus), pci_dev_id(pdev));
+ bus->priv = priv;
+
+ bus->read_c45 = mdio_read;
+ bus->write_c45 = mdio_write;
+
+ ret = devm_mdiobus_register(&pdev->dev, bus);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register mdiobus %d %u %u\n",
+ ret, bus->state, MDIOBUS_UNREGISTERED);
+ return ret;
+ }
+ mdio_set_speed(priv, MDIO_SPEED_6MHZ);
+ priv->mdio = bus;
+ return 0;
+}
--
2.34.1
Powered by blists - more mailing lists