lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 3 May 2024 09:28:25 +0300
From: Mike Rapoport <rppt@...nel.org>
To: Liviu Dudau <liviu@...au.co.uk>
Cc: Luis Chamberlain <mcgrof@...nel.org>, linux-kernel@...r.kernel.org,
	Alexandre Ghiti <alexghiti@...osinc.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Björn Töpel <bjorn@...nel.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	"David S. Miller" <davem@...emloft.net>,
	Dinh Nguyen <dinguyen@...nel.org>,
	Donald Dutile <ddutile@...hat.com>,
	Eric Chanudet <echanude@...hat.com>,
	Heiko Carstens <hca@...ux.ibm.com>, Helge Deller <deller@....de>,
	Huacai Chen <chenhuacai@...nel.org>,
	Kent Overstreet <kent.overstreet@...ux.dev>,
	Mark Rutland <mark.rutland@....com>,
	Masami Hiramatsu <mhiramat@...nel.org>,
	Michael Ellerman <mpe@...erman.id.au>,
	Nadav Amit <nadav.amit@...il.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Peter Zijlstra <peterz@...radead.org>,
	Philippe Mathieu-Daudé <philmd@...aro.org>,
	Rick Edgecombe <rick.p.edgecombe@...el.com>,
	Russell King <linux@...linux.org.uk>,
	Sam Ravnborg <sam@...nborg.org>, Song Liu <song@...nel.org>,
	Steven Rostedt <rostedt@...dmis.org>,
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
	Thomas Gleixner <tglx@...utronix.de>, Will Deacon <will@...nel.org>,
	bpf@...r.kernel.org, linux-arch@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-mips@...r.kernel.org,
	linux-mm@...ck.org, linux-modules@...r.kernel.org,
	linux-parisc@...r.kernel.org, linux-riscv@...ts.infradead.org,
	linux-s390@...r.kernel.org, linux-trace-kernel@...r.kernel.org,
	linuxppc-dev@...ts.ozlabs.org, loongarch@...ts.linux.dev,
	netdev@...r.kernel.org, sparclinux@...r.kernel.org, x86@...nel.org
Subject: Re: [PATCH v7 00/16] mm: jit/text allocator

On Fri, May 03, 2024 at 01:23:30AM +0100, Liviu Dudau wrote:
> On Thu, May 02, 2024 at 04:07:05PM -0700, Luis Chamberlain wrote:
> > On Thu, May 02, 2024 at 11:50:36PM +0100, Liviu Dudau wrote:
> > > On Mon, Apr 29, 2024 at 09:29:20AM -0700, Luis Chamberlain wrote:
> > > > On Mon, Apr 29, 2024 at 03:16:04PM +0300, Mike Rapoport wrote:
> > > > > From: "Mike Rapoport (IBM)" <rppt@...nel.org>
> > > > > 
> > > > > Hi,
> > > > > 
> > > > > The patches are also available in git:
> > > > > https://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux.git/log/?h=execmem/v7
> > > > > 
> > > > > v7 changes:
> > > > > * define MODULE_{VADDR,END} for riscv32 to fix the build and avoid
> > > > >   #ifdefs in a function body
> > > > > * add Acks, thanks everybody
> > > > 
> > > > Thanks, I've pushed this to modules-next for further exposure / testing.
> > > > Given the status of testing so far with prior revisions, in that only a
> > > > few issues were found and that those were fixed, and the status of
> > > > reviews, this just might be ripe for v6.10.
> > > 
> > > Looks like there is still some work needed. I've picked up next-20240501
> > > and on arch/mips with CONFIG_MODULE_COMPRESS_XZ=y and CONFIG_MODULE_DECOMPRESS=y
> > > I fail to load any module:
> > > 
> > > # modprobe rfkill
> > > [11746.539090] Invalid ELF header magic: != ELF
> > > [11746.587149] execmem: unable to allocate memory
> > > modprobe: can't load module rfkill (kernel/net/rfkill/rfkill.ko.xz): Out of memory
> > > 
> > > The (hopefully) relevant parts of my .config:
> > 
> > Thanks for the report! Any chance we can get you to try a bisection? I
> > think it should take 2-3 test boots. To help reduce scope you try modules-next:
> > 
> > https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=modules-next
> > 
> > Then can you check by resetting your tree to commmit 3fbe6c2f820a76 (mm:
> > introduce execmem_alloc() and execmem_free()"). I suspect that should
> > boot, so your bad commit would be the tip 3c2c250cb3a5fbb ("bpf: remove
> > CONFIG_BPF_JIT dependency on CONFIG_MODULES of").
> > 
> > That gives us only a few commits to bisect:
> > 
> > git log --oneline 3fbe6c2f820a76bc36d5546bda85832f57c8fce2..
> > 3c2c250cb3a5 (HEAD -> modules-next, korg/modules-next) bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
> > 11e8e65cce5c kprobes: remove dependency on CONFIG_MODULES
> > e10cbc38697b powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
> > 4da3d38f24c5 x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
> > 13ae3d74ee70 arch: make execmem setup available regardless of CONFIG_MODULES
> > 460bbbc70a47 powerpc: extend execmem_params for kprobes allocations
> > e1a14069b5b4 arm64: extend execmem_info for generated code allocations
> > 971e181c6585 riscv: extend execmem_params for generated code allocations
> > 0fa276f26721 mm/execmem, arch: convert remaining overrides of module_alloc to execmem
> > 022cef244287 mm/execmem, arch: convert simple overrides of module_alloc to execmem
> > 
> > With 2-3 boots we should be to tell which is the bad commit.
> 
> Looks like 0fa276f26721 is the first bad commit.
> 
> $ git bisect log
> # bad: [3c2c250cb3a5fbbccc4a4ff4c9354c54af91f02c] bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
> # good: [3fbe6c2f820a76bc36d5546bda85832f57c8fce2] mm: introduce execmem_alloc() and execmem_free()
> git bisect start '3c2c250cb3a5' '3fbe6c2f820a76'
> # bad: [460bbbc70a47e929b1936ca68979f3b79f168fc6] powerpc: extend execmem_params for kprobes allocations
> git bisect bad 460bbbc70a47e929b1936ca68979f3b79f168fc6
> # bad: [0fa276f26721e0ffc2ae9c7cf67dcc005b43c67e] mm/execmem, arch: convert remaining overrides of module_alloc to execmem
> git bisect bad 0fa276f26721e0ffc2ae9c7cf67dcc005b43c67e
> # good: [022cef2442870db738a366d3b7a636040c081859] mm/execmem, arch: convert simple overrides of module_alloc to execmem
> git bisect good 022cef2442870db738a366d3b7a636040c081859
> # first bad commit: [0fa276f26721e0ffc2ae9c7cf67dcc005b43c67e] mm/execmem, arch: convert remaining overrides of module_alloc to execmem
> 
> Maybe MIPS also needs a ARCH_WANTS_EXECMEM_LATE?

I don't think so. It rather seems there's a bug in the initialization of
the defaults in execmem. This should fix it:

diff --git a/mm/execmem.c b/mm/execmem.c
index f6dc3fabc1ca..0c4b36bc6d10 100644
--- a/mm/execmem.c
+++ b/mm/execmem.c
@@ -118,7 +118,6 @@ static void __init __execmem_init(void)
 		info->ranges[EXECMEM_DEFAULT].end = VMALLOC_END;
 		info->ranges[EXECMEM_DEFAULT].pgprot = PAGE_KERNEL_EXEC;
 		info->ranges[EXECMEM_DEFAULT].alignment = 1;
-		return;
 	}
 
 	if (!execmem_validate(info))
 
> Best regards,
> Liviu

-- 
Sincerely yours,
Mike.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ