lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20040219133628.GI25762@mail>
Date: Thu, 19 Feb 2004 08:36:28 -0500
From: NetBSD Security-Officer <security-officer@...bsd.org>
To: bugtraq@...urityfocus.com
Subject: NetBSD Security Advisory 2004-002: Inconsistent IPv6 path MTU discovery handling



-----BEGIN PGP SIGNED MESSAGE-----


		 NetBSD Security Advisory 2004-002
		 =================================

Topic:		Inconsistent IPv6 path MTU discovery handling

Version:	NetBSD-current:	source prior to February 5, 2004
		netBSD 1.6.2:	not affected (fixed)
		NetBSD 1.6.1:	affected
		NetBSD 1.6:	affected
		NetBSD-1.5.x:	not affected

Severity:	Remote kernel panic could be possible

Fixed:		NetBSD-current:		February 5, 2004
		NetBSD-1.6 branch:	February 9, 2004 (1.6.2 includes the fix)
		NetBSD-1.5 branch:	not affected


Abstract
========

A malicious party can cause a remote kernel panic by using ICMPv6 "too
big" messages.  

Technical Details
=================

Once a specially-crafted ICMPv6 "too big" message is sent to a victim
node, a routing table entry with a small path-MTU is installed.  

The victim system may later experience a kernel panic (due to a kernel
stack overflow) if a TCP session that uses the routing table entry is
later established.

For further details, see:

	http://www.guninski.com/obsdmtu.html


Solutions and Workarounds
=========================

The default NetBSD kernels (GENERIC*) ship with IPv6 compiled in.  If
you are using a kernel without IPv6, your system is not affected.
Kernels with the "options INET6" line removed, or commented out, from
the kernel configuration file do not include IPv6.

Additionally, an attacker requires IPv6 connectivity to the host to
send the packets that exploit this vulnerability.  Note, however, that
systems without external IPv6 routed connectivity may still be exposed
via LAN or similar connections, where neighbouring systems can send
IPv6 packets to the node.  This potentially includes shared external
segments and wireless networks.

The following instructions describe how to upgrade your kernel by
updating your source tree and rebuilding and installing a new version
of the kernel.  After replacing the kernel, a reboot is necessary.

* NetBSD-current:

	Systems running NetBSD-current dated from before 2004-02-04
	should be upgraded to NetBSD-current dated 2004-02-05 or later.

	The following directories need to be updated from the
	netbsd-current CVS branch (aka HEAD):
		sys/netinet
		sys/netinet6

	To update from CVS, re-build, and re-install kernel:

		# cd src
		# cvs update -d -P sys/netinet sys/netinet6
		# cd sys/arch/ARCH/conf
		# config KERNELCONF
		# cd ../../compile/KERNELCONF
		# make clean depend; make
		# mv /netbsd /netbsd.old
		# cp netbsd /

	Then perform a reboot.
		# reboot


* NetBSD 1.6, 1.6.1:

	The binary distributions of NetBSD 1.6 and 1.6.1 are vulnerable.


        * Binary patch:

	Binary patches are being provided, in the form of replacement
	kernels built with the patches from the GENERIC kernel
	configuration.  If you use a custom kernel configuration,
	these may not be suitable for you.

	NOTE: The same kernel includes fixes for NetBSD-SA2004-002 and
	NetBSD-SA2004-004. If you already updated for 2004-004, you do
	not need to perform these steps again.

        To apply the binary patch, perform the following steps,
        replacing ARCH with the NetBSD architecture you are running
        (i.e. i386):

        ftp://ftp.netbsd.org/pub/NetBSD/security/patches/SA2004-002-kernel/netbsd-1-6/ARCH-kernel.tgz
        cd / && cp /path/to/ARCH-kernel.gz /
	gzip -d ARCH-kernel.gz

        The tar file will extract a new copy of:
                ARCH-kernel

	Back up your old kernel:
	mv netbsd netbsd.old

        Then either rename:
	mv ARCH-kernel netbsd

	or link, as per local site policy:
	ln ARCH-kernel netbsd

	Then, reboot.


        * Updating from sources:


	Systems running NetBSD 1.6 sources dated from before
	2004-02-08 should be upgraded from NetBSD 1.6 sources dated
	2004-02-09 or later.

	NetBSD 1.6.2 includes the fix.

	The following directories need to be updated from the
	netbsd-1-6 CVS branch:
		sys/netinet
		sys/netinet6

	To update from CVS, re-build, and re-install kernel:

		# cd src
		# cvs update -d -P -r netbsd-1-6 sys/netinet sys/netinet6
		# cd sys/arch/ARCH/conf
		# config KERNELCONF
		# cd ../../compile/KERNELCONF
		# make clean depend; make
		# mv /netbsd /netbsd.old
		# cp netbsd /

	Then perform a reboot.
		# reboot


Thanks To
=========

Georgi Guninski
Markus Friedl
Daniel Hartmeier
IIJ seil team


Revision History
================

	2004-02-18	Initial release


More Information
================

Advisories may be updated as new information becomes available.
The most recent version of this advisory (PGP signed) can be found at 
  ftp://ftp.NetBSD.org/pub/NetBSD/security/advisories/NetBSD-SA2004-002.txt.asc

Information about NetBSD and NetBSD security can be found at
http://www.NetBSD.org/ and http://www.NetBSD.org/Security/.


Copyright 2004, The NetBSD Foundation, Inc.  All Rights Reserved.
Redistribution permitted only in full, unmodified form.

$NetBSD: NetBSD-SA2004-002.txt.asc,v 1.1 2004/02/18 14:13:24 david Exp $

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (NetBSD)

iQCVAwUBQDNz2D5Ru2/4N2IFAQEbcQP+MKBT8iS7hlZhQn24yIVDBo2NfkZKxBtH
kUnzsFBc6kce3ekWzRGqkC0xn7OpYbx99LEZQFIwpUfVNJmVyDOYP2WMQO2AERdw
lP+TRBQ2P90cF/q6RhYBpI7n3lsurehPXxgDiwYcyfgHTB7n2NxN/+2kTXwliRMz
ZRsBXm/cn/g=
=50/l
-----END PGP SIGNATURE-----



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ