lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <a12f60bb04062112004d47c753@mail.gmail.com>
Date: Mon, 21 Jun 2004 20:00:55 +0100
From: Filipe Almeida <filipe.almeida@...il.com>
To: sammy adedayo <sammyscity@...oo.com>
Cc: bugtraq@...urityfocus.com, full-disclosure@...ts.netsys.com,
   vulnwatch@...nwatch.org, zcrips_xrabbitz@...mail.com
Subject: Re: Troubles with Wireless pentest


Hi,
First, you should get the mac address of the gateway. This is easy,
just look at the destination mac of the outgoing packets or the source
mac of incoming packets.
Then add a static arp entry of an ip of your subnet with that mac
address and use it as the gateway.
Traceroute or record route should get you the real ip of the gateway.

Regards,
Filipe Almeida
http://community.sidestep.pt/~filipe/


----- Original Message -----
From: sammy adedayo <sammyscity@...oo.com>
Date: Mon, 21 Jun 2004 10:41:28 -0700 (PDT)
Subject: [Full-Disclosure] Troubles with Wireless pentest
To: bugtraq@...urityfocus.com, full-disclosure@...ts.netsys.com,
vulnwatch@...nwatch.org
Cc: zcrips_xrabbitz@...mail.com





A little help would be appreciated on this.


 


       A few problems occurred during a wireless pentest I am
presently undertaking. First a foundation,


1) The pentest was a zero knowledge kind,  no information was given,
in fact we were forbidden to ask for help from any of the staffs


These I found during the first day.


2) The network had a weak point = its wireless network.


3) The wireless network was encrypted but with the weak wep and for a
large corporation the data captured was enough to get the key


4) The network in focus is quite large with multiple subnets and lots
of �firewalls�


These I did.


5) Using kismet I sniffed a whole lot of packets. And decoded them
with the found wep key


6) Then using my conventional ettercap and ethereal I looked through
the packets.


Now The Problem.


7) I tried to connect to the net work 


8) I used a nice ip to match those on the network


9) Then I used ettercap to try and passively find the gateway but could not


10) I used etterape to watch the packet flow but I could not figure
out the gateway from all that traffic


HELP


HOW CAN I GET THE GATEWAY FOR THE WIRELESS NETWORK  AND IS THERE ANY
WAY I COULD ROUTE PACKETS TO / CONNECT TO/ SCAN THE REST OF THE
MACHINES ON THE NETWORK WITH OUT THE GATEWAYS ADDRESS.


 


OR IS THERE A BETTER WAY TO DO THE WHOLE PENTEST?


Pls help would be gladly appreciated.


Any ideas are welcome. THANKS�


 


Zippers crips


 


The Zcrips Inc


-----------------------------------------------------------------


a man is only limited by his imaginative abilities


 


		________________________________
Do you Yahoo!?

Yahoo! Mail - You care about security. So do we.

_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.netsys.com/full-disclosure-charter.html


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ