Message-ID: <003901c6ba78$78108bf0$6401a8c0@your4105e587b6>
Date: Mon, 7 Aug 2006 19:23:19 -0400
From: "Miguel Valentin" <valentinousn@...izon.net>
To: "'Andy Meyers'" <andy.meyers@...hmail.com>,
	"'Ginsu Rabbit'" <ginsurabbit@...mail.com>,
	<bugtraq@...urityfocus.com>
Subject: RE: linksys WRT54g authentication bypass

On my friends WRT54G router that I installed it always asks me for an ID and
password whenever I want to do anything even just checking the
configuration. You must've been the unlucky one in a million who just
happened to buy a "lemon".

-----Original Message-----
From: Andy Meyers [mailto:andy.meyers@...hmail.com] 
Sent: Monday, August 07, 2006 4:05 PM
To: 'Ginsu Rabbit'; bugtraq@...urityfocus.com
Subject: RE: linksys WRT54g authentication bypass

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I use HTTPS and disable HTTP on my Linksys WRT54G which seem to help
protect against this attack. I modified your curl command to:

curl -d -k "SecurityMode=0&layout=en" https://192.168.1.1/Security.tri

as to attempt to use your command in my environment.

My firmware is v4.30.5.


- -----------
Ashes
PGP: http://ashesbelow.ath.cx/public.txt

- -----Original Message-----
From: Ginsu Rabbit [mailto:ginsurabbit@...mail.com]
Sent: Saturday, August 05, 2006 11:53 AM
To: bugtraq@...urityfocus.com
Subject: linksys WRT54g authentication bypass

I'm having some trouble believing this hasn't been reported before.  If you
have a linksys router handy, please check to see whether it is vulnerable
to this attack.  It's possible that all of the linksys router web UIs have
the same bug.  Hopefully the problem is isolated to one particular model or
firmware revision.

I. DESCRIPTION

Tested product: Linksys WRT54g home router, firmware revision 1.00.9.

Problem #1: No password validation for configuration settings.

The WRT54g does not attempt to verify a username and password when
configuration settings are being changed.  If you wish to read
configuration settings, you must provide the administrator ID and password
via HTTP basic authentication.  No similar check is done for configuration
changes.

This request results in a user-id and password prompt:
GET /wireless.htm

This request disables wireless security on the router, with no password
prompt:
POST /Security.tri
Content-Length: 24

SecurityMode=0&layout=en

Problem #2: Cross-site request forgery

The web administration console does not verify that the request to change
the router configuration is being made with the consent of the
administrator.  Any web site can force a browser to send a request to the
linksys router, and the router will accept the request.


II. Exploitation

The combination of these two bugs means that any internet web site can
change the configuration of your router.  Recently published techniques for
port-scanning and web server finger printing via java and javascript make
this even easier.  The attack scenario is as follows:

- - intranet user visits a malicious web site
- - malicious web site returns specially crafted HTML page
- - intranet user's browser automatically sends a request to the router that
enables the remote administration interface
- - the owner of the malicious web site now has complete access to your
router

I'm not going to share the "specially crafted HTML page" at this time, but
it isn't all that special.


III. DETECTION

If your router is vulnerable, the following curl command will disable
wireless security on your router.  Tests for other router models and
firmware revisions may be different:

curl -d "SecurityMode=0&layout=en" http://192.168.0.1/Security.tri


IV. MITIGATION

1) Make sure you've disabled the remote administration feature of your
router.  If you have this "feature" enabled, anybody on the internet can
take control of the router.

2) Change the IP address of the router to a random value, preferably in the
range assigned to private networks.  For example, change the IP address to
10.x.y.z, where x, y, and z are numbers between 0 and 255 inclusive.  This
makes it more difficult for an attacker to forge the request necessary to
change the router configuration.  This mitigation technique might not help
much if you have a java-enabled browser, because of recently published
techniques for determining gateway addresses via java applets.

3) Disable HTTP access to the administration interface of the router,
allowing only HTTPS access.  Under most circumstances, this will cause the
browser to show a certificate warning before the configuration is changed.

V. VENDOR NOTIFICATION

Linksys customer support was notified on June 24, 2006.
Full disclosure on August 4, 2006.

- --
GR

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/


-----BEGIN PGP SIGNATURE-----
Note: This signature can be verified at https://www.hushtools.com/verify/
Version: Hush 2.5
Charset: UTF8

wkYEARECAAYFAkTXnNIACgkQnZu7yPmLRpB0xQCfULf7bQmY+ZPJLo9U2Wv1fndbU1YA
niq+hxN6md3Bh23db52jKtVhn+XY
=xJmw
-----END PGP SIGNATURE-----

Powered by blists - more mailing lists