Message-ID: <200302211200.sip-protos@productsecurity.cisco.com>
From: psirt at cisco.com (Cisco Systems Product Security Incident Response Team)
Subject: Cisco Security Advisory: Multiple Product Vulnerabilities found by PROTOS SIP Test Suite

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Cisco Security Advisory: Multiple Product Vulnerabilities found by PROTOS SIP
Test Suite

Revision 1.0 INTERIM

For Public Release 2003 February 21 UTC 1700

- -------------------------------------------------------------------------------

Contents

    Summary
    Affected Products
    Details
    Impact
    Software Versions and Fixes
    Obtaining Fixed Software
    Workarounds
    Exploitation and Public Announcements
    Status of This Notice: INTERIM
    Distribution
    Revision History
    Cisco Security Procedures

- -------------------------------------------------------------------------------

Summary
=======

Multiple Cisco products contain vulnerabilities in the processing of Session
Initiation Protocol (SIP) INVITE messages. These vulnerabilities were
identified by the University of Oulu Secure Programming Group (OUSPG) "PROTOS"
Test Suite for SIP and can be repeatedly exploited to produce a denial of
service.

This advisory is available at 
http://www.cisco.com/warp/public/707/cisco-sa-20030221-protos.shtml.

Affected Products
=================

  * Cisco IP Phone Model 7940/7960 running SIP images prior to 4.2
   
  * Cisco Routers running Cisco IOS 12.2T and 12.2 'X' trains
   
  * Cisco PIX Firewall running software versions with SIP support, beginning
    with version 5.2(1) and up to, but not including versions 6.2(2), 6.1(4),
    6.0(4) and 5.2(9)
   
Cisco products that are not running the SIP protocol or that do not provide
Network Address Translation (NAT) fixup services for the SIP protocol are not
affected.

Details
=======

SIP is the Internet Engineering Task Force (IETF) standard for multimedia
conferencing over IP. SIP is an ASCII-based, application-layer control protocol
(defined in RFCs 2543 and 3261) that can be used to establish, maintain, and
terminate calls between two or more endpoints.

The vulnerabilities identified can be easily and repeatedly demonstrated with
the use of the OUSPG "PROTOS" Test Suite for SIP. This suite is designed to
test the design limits of the implementation of the SIP protocol, specifically
the SIP INVITE messages that are used in the initial call setup between two SIP
endpoints.

The Cisco IP Phone models 7940 and 7960 are vulnerable to network-based Denial
of Service (DoS) attacks via this test suite due to buffer overflows and
improper handling of invalid headers. These vulnerabilities are documented as
Cisco Bug IDs CSCdz26317, CSCdz29003, CSCdz29033, and CSCdz29041.

Devices running Cisco IOS versions in the 12.2T train or any 12.2 'X' train may
reset due to improper handling of SIP fields. These vulnerabilities are
documented as Cisco Bug IDs CSCdz39284 and CSCdz41124. In order to be
vulnerable to CSCdz39284, the device must be running a vulnerable version of
IOS and be configured as a SIP gateway. However, any device running a
vulnerable version of Cisco IOS that is configured to perform NAT is vulnerable
to CSCdz41124 when SIP is using UDP as its transport.

The Cisco PIX Firewall may reset when receiving fragmented SIP INVITE messages.
As the SIP fixup does not support fragmented SIP messages, this has been
resolved to now drop SIP fragments. This vulnerability is documented as Cisco
Bug ID CSCdx47789.

Impact
======

Depending on the test case, the Cisco IP Phone models 7940 and 7960 would reset
or hang, requiring the manual power cycling of the device.

Vulnerable versions of both Cisco IOS and Cisco PIX Software would experience a
device reset.

Software Versions and Fixes
===========================

Cisco IP SIP Phones
- -------------------

This vulnerability is repaired in Cisco IP Phone SIP Images P0S3-04-2-00 and
later.

Cisco Secure PIX Firewall
- -------------------------

This vulnerability is repaired in Cisco Secure PIX Software versions 5.2.9,
6.0.4, 6.1.4, and 6.2.2 and later.

Cisco IOS
- ---------

Each row of the Cisco IOS software table (below) describes a release train and
the platforms or products for which it is intended. If a given release train is
vulnerable, then the earliest possible releases that contain the fix (the
"First Fixed Release") and the anticipated date of availability for each are
listed in the "Rebuild," "Interim," and "Maintenance" columns. A device running
a release in the given train that is earlier than the release in a specific
column (less than the First Fixed Release) is known to be vulnerable. The
release should be upgraded at least to the indicated release or a later version
(greater than or equal to the First Fixed Release label).

When selecting a release, keep in mind the following definitions:

  * Maintenance - Most heavily tested, stable, and highly recommended release
    of a release train in any given row of the table.
   
  * Rebuild - Constructed from the previous maintenance or major release in the
    same train, it contains the fix for a specific defect. Although it receives
    less testing, it contains only the minimal changes necessary to repair the
    vulnerability.
   
  * Interim - Built at regular intervals between maintenance releases and
    receives less testing. Interims should be selected only if there is no
    other suitable release that addresses the vulnerability. Interim images
    should be upgraded to the next available maintenance release as soon as
    possible. Interim releases are not available through manufacturing, and
    usually they are not available for customer download from CCO without prior
    arrangement with the Cisco TAC.
   
In all cases, customers should exercise caution to confirm that the devices to
be upgraded contain sufficient memory and that current hardware and software
configurations will continue to be supported properly by the new software
release. If the information is not clear, contact the Cisco TAC for assistance
as shown in the Obtaining Fixed Software section below.

More information on Cisco IOS software release names and abbreviations is
available at http://www.cisco.com/warp/public/620/1.html.

The fixes will be available at the Software Center located at 
http://www.cisco.com/tacpage/sw-center/.

+---------------------------------------------------------------------------+
|  Train or     | Description of Image | Availability of Fixed Releases     |
|   Release     |      or Platform     |                                    |
|--------------------------------------+------------------------------------|
| 12.2 Releases                        | Rebuild    | Interim | Maintenance |
|--------------------------------------+------------+---------+-------------|
|               |                      | 12.2(11)T3 |         |             |
| 12.2 T        |                      |            |         |             |
|               |                      | 12.2(13)T1 |         |             |
+---------------------------------------------------------------------------+

Obtaining Fixed Software
========================

Customers with contracts should obtain upgraded software through their regular
update channels. For most customers, this means that upgrades should be
obtained through the Software Center on Cisco's worldwide website at 
http://www.cisco.com/tacpage/sw-center/.

Customers whose Cisco products are provided or maintained through prior or
existing agreement with third-party support organizations such as Cisco
Partners, authorized resellers, or service providers should contact that
support organization for assistance with obtaining the free software 
upgrade(s).

Customers who purchase direct from Cisco but who do not hold a Cisco service
contract and customers who purchase through third-party vendors but are
unsuccessful at obtaining fixed software through their point of sale should get
their upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC
contacts are as follows.

  * +1 800 553 2447 (toll free from within North America)
   
  * +1 408 526 7209 (toll call from anywhere in the world)
   
  * e-mail: tac@...co.com
   
Please have your product serial number available and give the URL of this
notice as evidence of your entitlement to a free upgrade. Free upgrades for
non-contract customers must be requested through the TAC.

Please do not contact either "psirt@...co.com" or "security-alert@...co.com"
for software upgrades.

See http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml for additional
TAC contact information, including special localized telephone numbers and
instructions and e-mail addresses for use in various languages.

Workarounds
===========

For customers implementing IP Telephony via SIP, there are no known workarounds
for most of these defects directly on the devices. The Cisco PSIRT recommends
that customers upgrade to a version of software that contains fixes.

However, it may be possible to limit the exposure of SIP-enabled devices by
compartmentalizing the traffic to only those segments which require SIP traffic
to transit them. This may be done via any traffic-blocking mechanism such as
firewalls or router access lists that can block both UDP traffic with source or
destination ports of 5060 and TCP traffic with source or destination ports of
5060 and 5061. As always, it is important to investigate whether other local
legitimate non-SIP traffic is attempting to use the default ports that SIP may
also use before those ports are blocked completely.

Similarly, unless NAT for the SIP protocol is required, devices running
vulnerable versions of Cisco IOS which are configured to perform general NAT
services may simply implement ingress access lists to prevent the possible
translation of the SIP traffic by blocking UDP traffic with source or
destination ports of 5060.

Customers running version 6.2 of the Cisco Secure PIX Software may be able to
disable the SIP fixup feature depending on the configuration. See the Usage
Guidelines section at 
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/df.htm#1067379 
for more details.

Exploitation and Public Announcements
=====================================

The Cisco PSIRT is not aware of any malicious exploitation of these
vulnerabilities. This advisory is being published simultaneously with
announcements from other organizations such as the CERT Coordination Center.

Status of This Notice: INTERIM
==============================

This is a Interim advisory. Although Cisco cannot guarantee the accuracy of all
statements in this notice, all of the facts have been checked to the best of
our ability. Cisco does not anticipate issuing updated versions of this
advisory unless there is some material change in the facts. Should there be a
significant change in the facts, Cisco may update this advisory.

Distribution
============

This advisory will be posted on Cisco's worldwide website at 
http://www.cisco.com/warp/public/707/cisco-sa-20030221-protos.shtml.

In addition to worldwide web posting, a text version of this notice is
clear-signed with the Cisco PSIRT PGP key and is posted to the following 
e-mail and Usenet news recipients.

  * cust-security-announce@...co.com
  * bugtraq@...urityfocus.com
  * full-disclosure@...ts.netsys.com
  * first-teams@...st.org (includes CERT/CC)
  * cisco@...t.colorado.edu
  * cisco-nsp@...k.nether.net
  * comp.dcom.sys.cisco
  * Various internal Cisco mailing lists
   
Future updates of this advisory, if any, will be placed on Cisco's worldwide
website, but may or may not be actively announced on mailing lists or
newsgroups. Users concerned about this problem are encouraged to check the
above URL for any updates.

Revision History
================

+---------------------------------------------------------------+
| Revision 1.0  | 21-February-2003 | Initial public release     |
+---------------------------------------------------------------+

Cisco Security Procedures
=========================

Complete information on reporting security vulnerabilities in Cisco products,
obtaining assistance with security incidents, and registering to receive
security information from Cisco, is available on Cisco's worldwide website at 
http://www.cisco.com/warp/public/707/sec_incident_response.shtml. This includes
instructions for press inquiries regarding Cisco security notices. All Cisco
security advisories are available at http://www.cisco.com/go/psirt/.

- -------------------------------------------------------------------------------

This notice is Copyright 2003 by Cisco Systems, Inc. This notice may be
redistributed freely after the release date given at the top of the text,
provided that redistributed copies are complete and unmodified, and include all
date and version information.

- -------------------------------------------------------------------------------


-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.2

iQA/AwUBPlZXBpPS/wbyNnWcEQLn0QCgtuMcneCLmjCbRdeIoGZqRB4G2qEAnitL
X8fHT9bcsk+ZHOsdPq+DRz0L
=ykar
-----END PGP SIGNATURE-----

Powered by blists - more mailing lists