[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20040621174128.48243.qmail@web53010.mail.yahoo.com>
From: sammyscity at yahoo.com (sammy adedayo)
Subject: Troubles with Wireless pentest
A little help would be appreciated on this.
A few problems occurred during a wireless pentest I am presently undertaking. First a foundation,
1) The pentest was a zero knowledge kind, no information was given, in fact we were forbidden to ask for help from any of the staffs
These I found during the first day.
2) The network had a weak point = its wireless network.
3) The wireless network was encrypted but with the weak wep and for a large corporation the data captured was enough to get the key
4) The network in focus is quite large with multiple subnets and lots of “firewalls”
These I did.
5) Using kismet I sniffed a whole lot of packets. And decoded them with the found wep key
6) Then using my conventional ettercap and ethereal I looked through the packets.
Now The Problem.
7) I tried to connect to the net work
8) I used a nice ip to match those on the network
9) Then I used ettercap to try and passively find the gateway but could not
10) I used etterape to watch the packet flow but I could not figure out the gateway from all that traffic
HELP
HOW CAN I GET THE GATEWAY FOR THE WIRELESS NETWORK AND IS THERE ANY WAY I COULD ROUTE PACKETS TO / CONNECT TO/ SCAN THE REST OF THE MACHINES ON THE NETWORK WITH OUT THE GATEWAYS ADDRESS.
OR IS THERE A BETTER WAY TO DO THE WHOLE PENTEST?
Pls help would be gladly appreciated.
Any ideas are welcome. THANKS…
Zippers crips
The Zcrips Inc
-----------------------------------------------------------------
a man is only limited by his imaginative abilities
---------------------------------
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.grok.org.uk/pipermail/full-disclosure/attachments/20040621/56f4af43/attachment.html
Powered by blists - more mailing lists