| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2025022605-CVE-2022-49130-8e95@gregkh> Date: Wed, 26 Feb 2025 02:55:35 +0100 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-cve-announce@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org> Subject: CVE-2022-49130: ath11k: mhi: use mhi_sync_power_up() Description =========== In the Linux kernel, the following vulnerability has been resolved: ath11k: mhi: use mhi_sync_power_up() If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The reason for that was that we were using mhi_async_power_up() which does not check any errors. But mhi_sync_power_up() on the other hand does check for errors so let's use that to fix the crash. I was not able to find a reason why an async version was used. ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from ath11k_hif_power_up(), which can sleep. So sync version should be safe to use here. [ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567 [ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k] [ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08 [ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246 [ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455 [ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80 [ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497 [ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000 [ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8 [ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000 [ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0 [ 145.570623] Call Trace: [ 145.570675] <TASK> [ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k] [ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k] [ 145.570864] ? tasklet_init+0x150/0x150 [ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k] [ 145.570986] ? tasklet_clear_sched+0x42/0xe0 [ 145.571042] ? tasklet_kill+0xe9/0x1b0 [ 145.571095] ? tasklet_clear_sched+0xe0/0xe0 [ 145.571148] ? irq_has_action+0x120/0x120 [ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k] [ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci] [ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k] [ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k] [ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci] [ 145.571553] pci_device_remove+0x9a/0x1c0 [ 145.571605] __device_release_driver+0x332/0x660 [ 145.571659] driver_detach+0x1e7/0x2c0 [ 145.571712] bus_remove_driver+0xe2/0x2d0 [ 145.571772] pci_unregister_driver+0x21/0x250 [ 145.571826] __do_sys_delete_module+0x30a/0x4b0 [ 145.571879] ? free_module+0xac0/0xac0 [ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50 [ 145.572039] ? lockdep_hardirqs_on+0x79/0x100 [ 145.572097] do_syscall_64+0x3b/0x90 [ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 The Linux kernel CVE team has assigned CVE-2022-49130 to this issue. Affected and fixed versions =========================== Fixed in 5.10.111 with commit 339bd0b55ecdd0f7f341e9357c4cfde799de9418 Fixed in 5.15.34 with commit 20d01a11efde2e05e47d5c66101f5c26eaca68e2 Fixed in 5.16.20 with commit 3fd7d50384c3808b7f7fa135aa9bb5feb1cb9849 Fixed in 5.17.3 with commit 646d533af2911be1184eaee8c900b7eb8ecc4396 Fixed in 5.18 with commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d Please see https://www.kernel.org for a full list of currently supported kernel versions by the kernel community. Unaffected versions might change over time as fixes are backported to older supported kernel versions. The official CVE entry at https://cve.org/CVERecord/?id=CVE-2022-49130 will be updated if fixes are backported, please check that for the most up to date information about this issue. Affected files ============== The file(s) affected by this issue are: drivers/net/wireless/ath/ath11k/mhi.c Mitigation ========== The Linux kernel CVE team recommends that you update to the latest stable kernel version for this, and many other bugfixes. Individual changes are never tested alone, but rather are part of a larger kernel release. Cherry-picking individual commits is not recommended or supported by the Linux kernel community at all. If however, updating to the latest release is impossible, the individual changes to resolve this issue can be found at these commits: https://git.kernel.org/stable/c/339bd0b55ecdd0f7f341e9357c4cfde799de9418 https://git.kernel.org/stable/c/20d01a11efde2e05e47d5c66101f5c26eaca68e2 https://git.kernel.org/stable/c/3fd7d50384c3808b7f7fa135aa9bb5feb1cb9849 https://git.kernel.org/stable/c/646d533af2911be1184eaee8c900b7eb8ecc4396 https://git.kernel.org/stable/c/3df6d74aedfdca919cca475d15dfdbc8b05c9e5d
Powered by blists - more mailing lists