| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1211390093.5571.16.camel@BVR-FS.beaverton.ibm.com>
Date: Wed, 21 May 2008 10:14:53 -0700
From: Mingming <cmm@...ibm.com>
To: Jan Kara <jack@...e.cz>
Cc: Andrew Morton <akpm@...ux-foundation.org>, pbadari@...ibm.com,
linux-ext4@...r.kernel.org, linux-kernel@...r.kernel.org,
Jens Axboe <jens.axboe@...cle.com>
Subject: Re: [PATCH-v2] JBD: Fix race between free buffer and commit
trasanction
On Wed, 2008-05-21 at 01:53 +0200, Jan Kara wrote:
> > JBD: fix race between journal_try_to_free_buffers() and jbd commit transaction
> >
> > From: Mingming Cao <cmm@...ibm.com>
> >
> > journal_try_to_free_buffers() could race with jbd commit transaction when
> > the later is holding the buffer reference while waiting for the data buffer
> > to flush to disk. If the caller of journal_try_to_free_buffers() request
> > tries hard to release the buffers, it will treat the failure as error and return
> > back to the caller. We have seen the directo IO failed due to this race.
> > Some of the caller of releasepage() also expecting the buffer to be dropped
> > when passed with GFP_KERNEL mask to the releasepage()->journal_try_to_free_buffers().
> >
> > With this patch, if the caller is passing the GFP_KERNEL to indicating this
> > call could wait, in case of try_to_free_buffers() failed, let's waiting for
> > journal_commit_transaction() to finish commit the current committing transaction
> > , then try to free those buffers again with journal locked.
> >
> > Signed-off-by: Mingming Cao <cmm@...ibm.com>
> > Reviewed-by: Badari Pulavarty <pbadari@...ibm.com>
> > ---
> > fs/jbd/transaction.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++--
> > mm/filemap.c | 3 --
> > 2 files changed, 54 insertions(+), 4 deletions(-)
> >
> > Index: linux-2.6.26-rc2/fs/jbd/transaction.c
> > ===================================================================
> > --- linux-2.6.26-rc2.orig/fs/jbd/transaction.c 2008-05-11 17:09:41.000000000 -0700
> > +++ linux-2.6.26-rc2/fs/jbd/transaction.c 2008-05-19 16:16:41.000000000 -0700
> > @@ -1648,12 +1648,39 @@ out:
> > return;
> > }
> >
> > +/*
> > + * journal_try_to_free_buffers() could race with journal_commit_transaction()
> > + * The later might still hold the reference count to the buffers when inspecting
> > + * them on t_syncdata_list or t_locked_list.
> > + *
> > + * Journal_try_to_free_buffers() will call this function to
> > + * wait for the current transaction to finish syncing data buffers, before
> > + * try to free that buffer.
> > + *
> > + * Called with journal->j_state_lock hold.
> > + */
> > +static void journal_wait_for_transaction_sync_data(journal_t *journal)
> > +{
> > + transaction_t *transaction = NULL;
> > + tid_t tid;
> > +
> > + transaction = journal->j_committing_transaction;
> > +
> > + if (!transaction)
> > + return;
> > +
> > + tid = transaction->t_tid;
> > + spin_unlock(&journal->j_state_lock);
> > + log_wait_commit(journal, tid);
> > + spin_lock(&journal->j_state_lock);
> > +}
> What is actually the point of entering the function with j_state_lock
> held and also keeping it after return? It should be enough to take it
> and release it just inside this function, shouldn't it?
>
I was worried about the case when we call try_to_free_buffers() again,
it races with the current transaction commit again. Is it possible? I
guess the question is whether it is possible to have buffers on the same
page attached to different transaction. If so, I think we need to keep
the journal state lock while retry try_to_free_buffers(), so that the
retry won't race with the commit transaction again...
> > /**
> > * int journal_try_to_free_buffers() - try to free page buffers.
> > * @journal: journal for operation
> > * @page: to try and free
> > - * @unused_gfp_mask: unused
> > + * @gfp_mask: specifies whether the call may block
> > + * (__GFP_WAIT & __GFP_FS via GFP_KERNEL)
> This comment seems a bit misleading to me - I'd rather write there:
>
> @gfp_mask: we use the mask to detect how hard should we try to release
> buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to
> release the buffers.
>
Sure.
> > *
> > *
> > * For all the buffers on this page,
> > @@ -1682,9 +1709,11 @@ out:
> > * journal_try_to_free_buffer() is changing its state. But that
> > * cannot happen because we never reallocate freed data as metadata
> > * while the data is part of a transaction. Yes?
> > + *
> > + * Return 0 on failure, 1 on success
> > */
> > int journal_try_to_free_buffers(journal_t *journal,
> > - struct page *page, gfp_t unused_gfp_mask)
> > + struct page *page, gfp_t gfp_mask)
> > {
> > struct buffer_head *head;
> > struct buffer_head *bh;
> > @@ -1713,7 +1742,30 @@ int journal_try_to_free_buffers(journal_
> > if (buffer_jbd(bh))
> > goto busy;
> > } while ((bh = bh->b_this_page) != head);
> > +
> > ret = try_to_free_buffers(page);
> > +
> > + /*
> > + * There are a number of places where journal_try_to_free_buffers()
> > + * could race with journal_commit_transaction(), the later still
> > + * holds the reference to the buffers to free while processing them.
> > + * try_to_free_buffers() failed to free those buffers. Some of the
> > + * caller of releasepage() request page buffers to be dropped, otherwise
> > + * treat the fail-to-free as errors (such as generic_file_direct_IO())
> > + *
> > + * So, if the caller of try_to_release_page() wants the synchronous
> > + * behaviour(i.e make sure buffers are dropped upon return),
> > + * let's wait for the current transaction to finish flush of
> > + * dirty data buffers, then try to free those buffers again,
> > + * with the journal locked.
> > + */
> > + if (ret == 0 && gfp_mask & GFP_KERNEL) {
> I think this test is wrong - it should rather be something like
> (ret == 0 && (gfp_mask & GFP_KERNEL == GFP_KERNEL)) - or even expand the
> test to gfp_mask & __GFP_WAIT && gfp_mask & __GFP_FS && gfp_mask &
> __GFP_IO.
>
Thanks for pointing this out.
> > + spin_lock(&journal->j_state_lock);
> > + journal_wait_for_transaction_sync_data(journal);
> > + ret = try_to_free_buffers(page);
> > + spin_unlock(&journal->j_state_lock);
> > + }
> > +
> > busy:
> > return ret;
> > }
> > Index: linux-2.6.26-rc2/mm/filemap.c
> > ===================================================================
> > --- linux-2.6.26-rc2.orig/mm/filemap.c 2008-05-19 16:00:01.000000000 -0700
> > +++ linux-2.6.26-rc2/mm/filemap.c 2008-05-19 16:01:34.000000000 -0700
> > @@ -2581,9 +2581,8 @@ out:
> > * Otherwise return zero.
> > *
> > * The @gfp_mask argument specifies whether I/O may be performed to release
> > - * this page (__GFP_IO), and whether the call may block (__GFP_WAIT).
> > + * this page (__GFP_IO), and whether the call may block (__GFP_WAIT & __GFP_FS).
> Probably __GFP_WAIT | __GFP_IO here... But I'm not sure why do we
> really change this...
>
For try_to_release_page(),we should wait only when (__GFP_WAIT &
__GFP_FS), isn't it?
> > *
> > - * NOTE: @gfp_mask may go away, and this function may become non-blocking.
> > */
> > int try_to_release_page(struct page *page, gfp_t gfp_mask)
> > {
> >
>
> Honza
Thanks, patch v3 to follow.
Mingming
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists