| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100128172442.GA531@develbox.linuxbox.cz> Date: Thu, 28 Jan 2010 18:24:43 +0100 From: Nikola Ciprich <extmaillist@...uxbox.cz> To: Ric Wheeler <rwheeler@...hat.com> Cc: tytso@....edu, Nikola Ciprich <nikola.ciprich@...uxbox.cz>, ext4 maillist <linux-ext4@...r.kernel.org>, IDE/ATA development list <linux-ide@...r.kernel.org>, mzik@...uxbox.cz Subject: Re: 2.6.32.4 - still getting ext4 related crashes > If you only see this with an external S-ATA box and a long cable, we > might have issues with S-ATA (and knock on issues with error > handling up the stack). > > Can you summarize/repost the log of the panic with the linux-ide > people cc'ed (added above)? Hi Ric, sure, here's summary of the problem: After upgrading my box to 2.6.32.x, it started crashing while copying larger amounts of data (backtraces follow). I did a lot of testing, and it always happens, when the target disk is connected using external eSATA box and using long (~1M) eSATA cable. In this case, it's enough to start 2 parallel copying processes, and crash follows within minutes (tested on two different machines, using two differrent boxes). I first thought it doesn't happen with shorter eSATA cable, but leaving copying running in cycle for hours invoked crash as well - so it just takes much longer. It never happens while using standard SATA cable with directly connected disk. So now my concerns are: - if the box is screwing data, then kernel maybe could behave in better way then just crashing with lots of backtraces. - it's strange that with older kernels (<= 2.6.31.x) it *SEEMED* to work. I plan to repeat tests with older kernels, and with checking MD5 of written data to see if it was writing data correctly, or just not noticing something is wrong. - the whole thing leads me to another question - what is the current state of block device integrity support? I haven't found much information about it, do common SATA drives support it? Can filesystems like ext4 use it? Anyways, if there is anything else I could do/test, please let me know. Since I can reproduce the problem on testing box, I'm free to test new kernels, git snapshots, bisect, whatever :) cheers nik here are the traces: [ 2325.861079] ------------[ cut here ]------------ [ 2325.865003] kernel BUG at fs/ext4/inode.c:1852! [ 2325.865003] invalid opcode: 0000 [#1] PREEMPT SMP [ 2325.865003] last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:0a:00.0/0000:0b:0e.0/host4/target4:0:3/4:0:3:0/type [ 2325.880011] CPU 1 [ 2325.880011] Modules linked in: ext4 jbd2 crc16 sha256_generic krng ansi_cprng eseqiv rng cryptd crypto_wq aes_x86_64 aes_generic cbc cryptomgr crypto_hash aead pcompress dm_crypt crypto_blkcipher crypto_algapi ipmi_si ipmi_devintf ipmi_msghandler netconsole nfsd nfs_acl auth_rpcgss exportfs ipv6 autofs4 lockd sunrpc 8021q cpufreq_ondemand acpi_cpufreq freq_table reiserfs crc32 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx video backlight output sbs sbshc fan battery ac piix pata_acpi ide_pci_generic container ide_core joydev ata_piix processor usbhid thermal button rng_core thermal_sys i2c_i801 i2c_core iTCO_wdt i3000_edac ata_generic shpchp pcspkr pci_hotplug e1000e edac_core sg arcmsr ahci libata sd_mod scsi_mod crc_t10dif raid1 dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 2325.880011] Pid: 4993, comm: mc Not tainted 2.6.32lb.05 #1 PDSM4+ [ 2325.880011] RIP: 0010:[<ffffffffa06227ec>] [<ffffffffa06227ec>] ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2325.880011] RSP: 0018:ffff880074acf9f8 EFLAGS: 00010202 [ 2325.880011] RAX: 0000000000000054 RBX: ffff88005665f090 RCX: 0000000000000001 [ 2325.880011] RDX: 0000000000000053 RSI: 0000000000000053 RDI: 0000000000000154 [ 2325.880011] RBP: ffff880074acfa58 R08: 0000000000000153 R09: 0000000000000000 [ 2325.880011] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000001000 [ 2325.880011] R13: ffff88006ee711c0 R14: ffff88005665ef60 R15: 0000000000001000 [ 2325.880011] FS: 00007fb72114d6e0(0000) GS:ffff880001f00000(0000) knlGS:0000000000000000 [ 2325.880011] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2325.880011] CR2: 00007f42d73d3000 CR3: 00000000743ba000 CR4: 00000000000006e0 [ 2325.880011] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2325.880011] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2325.880011] Process mc (pid: 4993, threadinfo ffff880074ace000, task ffff88007c562720) [ 2325.880011] Stack: [ 2325.880011] ffff88005665f090 ffff88005665f530 0000000074acfa28 ffffffffffff0000 [ 2325.880011] <0> ffff880071e5b800 ffffea0001d88e90 0000000074acfa58 0000000000001000 [ 2325.880011] <0> 0000000000001000 0000000000000000 ffff880074acfad8 0000000000001000 [ 2325.880011] Call Trace: [ 2325.880011] [<ffffffff8113d15c>] __block_prepare_write+0x27c/0x440 [ 2325.880011] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2325.880011] [<ffffffff810dbb92>] ? __lru_cache_add+0x72/0xb0 [ 2325.880011] [<ffffffff8113d3b9>] block_write_begin+0x59/0xe0 [ 2325.880011] [<ffffffffa0621612>] ext4_da_write_begin+0x182/0x280 [ext4] [ 2325.880011] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2325.880011] [<ffffffff810d29aa>] generic_file_buffered_write+0x10a/0x290 [ 2325.880011] [<ffffffff810d2ef6>] __generic_file_aio_write+0x266/0x420 [ 2325.880011] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2325.880011] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2325.880011] [<ffffffffa0617f06>] ext4_file_write+0x46/0xb0 [ext4] [ 2325.880011] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2325.880011] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2325.880011] [<ffffffff810a4762>] ? audit_filter_syscall+0x92/0x190 [ 2325.880011] [<ffffffff810a470a>] ? audit_filter_syscall+0x3a/0x190 [ 2325.880011] [<ffffffff810a469f>] ? audit_filter_inodes+0x19f/0x1d0 [ 2325.880011] [<ffffffff81199491>] ? security_file_permission+0x11/0x20 [ 2325.880011] [<ffffffff81115737>] vfs_write+0xc7/0x1a0 [ 2325.880011] [<ffffffff81115e40>] sys_write+0x50/0x90 [ 2325.880011] [<ffffffff8100b2ab>] system_call_fastpath+0x16/0x1b [ 2325.880011] Code: 55 b8 49 89 55 18 48 8b 40 18 49 89 45 20 f0 41 80 4d 00 40 f0 41 80 4d 01 02 e9 69 ff ff ff c7 45 b4 86 ff ff ff e9 5d ff ff ff <0f> 0b eb fe 0f 0b eb fe 0f 0b eb fe 90 90 90 90 90 90 90 90 55 [ 2325.880011] RIP [<ffffffffa06227ec>] ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2325.880011] RSP <ffff880074acf9f8> [ 2326.278501] ---[ end trace a098b7f7914465c3 ]--- [ 2326.283355] note: mc[4993] exited with preempt_count 1 [ 2326.288756] BUG: scheduling while atomic: mc/4993/0x10000002 [ 2326.294693] INFO: lockdep is turned off. [ 2326.298967] Modules linked in: ... [ 2326.387665] Pid: 4993, comm: mc Tainted: G D 2.6.32lb.05 #1 [ 2326.394188] Call Trace: [ 2326.396801] [<ffffffff8107e6d5>] ? __debug_show_held_locks+0x25/0x30 [ 2326.403518] [<ffffffff81041125>] __schedule_bug+0x65/0x70 [ 2326.409275] [<ffffffff81340495>] thread_return+0x6e8/0x823 [ 2326.415134] [<ffffffff81043993>] __cond_resched+0x13/0x30 [ 2326.420870] [<ffffffff81340648>] _cond_resched+0x28/0x30 [ 2326.426542] [<ffffffff810ee54b>] unmap_vmas+0x93b/0x9d0 [ 2326.432097] [<ffffffff810f347e>] exit_mmap+0xde/0x190 [ 2326.437464] [<ffffffff8104d444>] mmput+0x54/0x110 [ 2326.442541] [<ffffffff81052502>] exit_mm+0x102/0x130 [ 2326.447814] [<ffffffff8122ab0d>] ? tty_audit_exit+0x2d/0x90 [ 2326.453718] [<ffffffff81053c4d>] do_exit+0x18d/0x7d0 [ 2326.459013] [<ffffffff8100f8d7>] oops_end+0xa7/0xb0 [ 2326.464195] [<ffffffff8100fad6>] die+0x56/0x90 [ 2326.468971] [<ffffffff8100c820>] do_trap+0x130/0x150 [ 2326.474260] [<ffffffff8100ce90>] do_invalid_op+0x90/0xb0 [ 2326.479929] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2326.487370] [<ffffffff8100c0b5>] invalid_op+0x15/0x20 [ 2326.492853] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2326.500290] [<ffffffffa06226bb>] ? ext4_da_get_block_prep+0x16b/0x2b0 [ext4] [ 2326.507731] [<ffffffff8113d15c>] __block_prepare_write+0x27c/0x440 [ 2326.514280] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2326.521540] [<ffffffff810dbb92>] ? __lru_cache_add+0x72/0xb0 [ 2326.527519] [<ffffffff8113d3b9>] block_write_begin+0x59/0xe0 [ 2326.533545] [<ffffffffa0621612>] ext4_da_write_begin+0x182/0x280 [ext4] [ 2326.540591] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2326.547857] [<ffffffff810d29aa>] generic_file_buffered_write+0x10a/0x290 [ 2326.556534] [<ffffffff810d2ef6>] __generic_file_aio_write+0x266/0x420 [ 2326.563380] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2326.570055] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2326.576548] [<ffffffffa0617f06>] ext4_file_write+0x46/0xb0 [ext4] [ 2326.583036] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2326.588834] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2326.595559] [<ffffffff810a4762>] ? audit_filter_syscall+0x92/0x190 [ 2326.602112] [<ffffffff810a470a>] ? audit_filter_syscall+0x3a/0x190 [ 2326.608665] [<ffffffff810a469f>] ? audit_filter_inodes+0x19f/0x1d0 [ 2326.615228] [<ffffffff81199491>] ? security_file_permission+0x11/0x20 [ 2326.622061] [<ffffffff81115737>] vfs_write+0xc7/0x1a0 [ 2326.627451] [<ffffffff81115e40>] sys_write+0x50/0x90 [ 2326.632765] [<ffffffff8100b2ab>] system_call_fastpath+0x16/0x1b [ 2326.639643] ------------[ cut here ]------------ [ 2326.643044] kernel BUG at fs/jbd/transaction.c:280! [ 2326.643044] invalid opcode: 0000 [#2] PREEMPT SMP [ 2326.643044] last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:0a:00.0/0000:0b:0e.0/host4/target4:0:3/4:0:3:0/type [ 2326.643044] CPU 0 [ 2326.643044] Modules linked in:... [ 2326.643044] Pid: 4993, comm: mc Tainted: G D 2.6.32lb.05 #1 PDSM4+ [ 2326.643044] RIP: 0010:[<ffffffffa002850c>] [<ffffffffa002850c>] journal_start+0xec/0xf0 [jbd] [ 2326.643044] RSP: 0018:ffff880074acf2f8 EFLAGS: 00010206 [ 2326.643044] RAX: ffff880073f1ba00 RBX: ffff88007aafae10 RCX: 0000000000000000 [ 2326.643044] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88006de24000 [ 2326.643044] RBP: ffff880074acf328 R08: 0000000000000001 R09: 0000000000000040 [ 2326.643044] R10: 0000000000000001 R11: ffff880074acf480 R12: ffff88007aafae10 [ 2326.643044] R13: ffff88006de24000 R14: ffff88007c562720 R15: 0000000000000002 [ 2326.643044] FS: 00007fb72114d6e0(0000) GS:ffff880001e00000(0000) knlGS:0000000000000000 [ 2326.643044] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2326.643044] CR2: 00007fe90556b011 CR3: 0000000076954000 CR4: 00000000000006f0 [ 2326.643044] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2326.643044] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2326.643044] Process mc (pid: 4993, threadinfo ffff880074ace000, task ffff88007c562720) [ 2326.643044] Stack: [ 2326.643044] 0000000000000202 0000000000000001 ffff88007aafae10 ffff8800784977a8 [ 2326.643044] <0> 000000004b5961a7 ffff880079064500 ffff880074acf338 ffffffffa004c47c [ 2326.643044] <0> ffff880074acf368 ffffffffa00461b8 000000000001bde0 0000000000000001 [ 2326.643044] Call Trace: [ 2326.643044] [<ffffffffa004c47c>] ext3_journal_start_sb+0x2c/0x50 [ext3] [ 2326.643044] [<ffffffffa00461b8>] ext3_dirty_inode+0x38/0x90 [ext3] [ 2326.643044] [<ffffffff81136995>] __mark_inode_dirty+0x35/0x180 [ 2326.643044] [<ffffffff8112c545>] file_update_time+0xe5/0x190 [ 2326.643044] [<ffffffff810d2ec2>] __generic_file_aio_write+0x232/0x420 [ 2326.643044] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2326.643044] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2326.643044] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2326.643044] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2326.643044] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2326.643044] [<ffffffff810929bc>] ? do_acct_process+0x23c/0x4e0 [ 2326.643044] [<ffffffff81092af2>] do_acct_process+0x372/0x4e0 [ 2326.643044] [<ffffffff810928d0>] ? do_acct_process+0x150/0x4e0 [ 2326.643044] [<ffffffff81092ccc>] acct_process+0x6c/0xa0 [ 2326.643044] [<ffffffff810541d5>] do_exit+0x715/0x7d0 [ 2326.643044] [<ffffffff8100f8d7>] oops_end+0xa7/0xb0 [ 2326.643044] [<ffffffff8100fad6>] die+0x56/0x90 [ 2326.643044] [<ffffffff8100c820>] do_trap+0x130/0x150 [ 2326.643044] [<ffffffff8100ce90>] do_invalid_op+0x90/0xb0 [ 2326.643044] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2326.643044] [<ffffffff8100c0b5>] invalid_op+0x15/0x20 [ 2326.643044] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2326.643044] [<ffffffffa06226bb>] ? ext4_da_get_block_prep+0x16b/0x2b0 [ext4] [ 2326.643044] [<ffffffff8113d15c>] __block_prepare_write+0x27c/0x440 [ 2326.643044] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2326.643044] [<ffffffff810dbb92>] ? __lru_cache_add+0x72/0xb0 [ 2326.643044] [<ffffffff8113d3b9>] block_write_begin+0x59/0xe0 [ 2326.643044] [<ffffffffa0621612>] ext4_da_write_begin+0x182/0x280 [ext4] [ 2326.643044] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2326.643044] [<ffffffff810d29aa>] generic_file_buffered_write+0x10a/0x290 [ 2326.643044] [<ffffffff810d2ef6>] __generic_file_aio_write+0x266/0x420 [ 2326.643044] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2326.643044] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2326.643044] [<ffffffffa0617f06>] ext4_file_write+0x46/0xb0 [ext4] [ 2326.643044] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2326.643044] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2326.643044] [<ffffffff810a4762>] ? audit_filter_syscall+0x92/0x190 [ 2326.643044] [<ffffffff810a470a>] ? audit_filter_syscall+0x3a/0x190 [ 2326.643044] [<ffffffff810a469f>] ? audit_filter_inodes+0x19f/0x1d0 [ 2326.643044] [<ffffffff81199491>] ? security_file_permission+0x11/0x20 [ 2326.643044] [<ffffffff81115737>] vfs_write+0xc7/0x1a0 [ 2326.643044] [<ffffffff81115e40>] sys_write+0x50/0x90 [ 2326.643044] [<ffffffff8100b2ab>] system_call_fastpath+0x16/0x1b [ 2326.643044] Code: ff ff 85 c0 41 89 c4 79 84 48 8b 3d 17 91 00 00 48 89 de 49 63 dc e8 14 31 0e e1 49 c7 86 08 16 00 00 00 00 00 00 e9 62 ff ff ff <0f> 0b eb fe 55 be 01 00 00 00 48 89 e5 e8 02 ff ff ff 48 3d 00 [ 2326.643044] RIP [<ffffffffa002850c>] journal_start+0xec/0xf0 [jbd] [ 2326.643044] RSP <ffff880074acf2f8> [ 2327.196604] ---[ end trace a098b7f7914465c4 ]--- [ 2327.202605] Fixing recursive fault but reboot is needed! [ 2327.208771] BUG: scheduling while atomic: mc/4993/0x00000002 [ 2327.215260] INFO: lockdep is turned off. [ 2327.219481] Modules linked in:... [ 2327.316660] Pid: 4993, comm: mc Tainted: G D 2.6.32lb.05 #1 [ 2327.323275] Call Trace: [ 2327.325941] [<ffffffff8107e6d5>] ? __debug_show_held_locks+0x25/0x30 [ 2327.332718] [<ffffffff81041125>] __schedule_bug+0x65/0x70 [ 2327.338506] [<ffffffff81340495>] thread_return+0x6e8/0x823 [ 2327.344449] [<ffffffff81054275>] do_exit+0x7b5/0x7d0 [ 2327.349818] [<ffffffff8100f8d7>] oops_end+0xa7/0xb0 [ 2327.355610] [<ffffffff8100fad6>] die+0x56/0x90 [ 2327.360972] [<ffffffff8100c820>] do_trap+0x130/0x150 [ 2327.366358] [<ffffffff8100ce90>] do_invalid_op+0x90/0xb0 [ 2327.372602] [<ffffffffa002850c>] ? journal_start+0xec/0xf0 [jbd] [ 2327.379599] [<ffffffff81051055>] ? vprintk+0x3c5/0x4c0 [ 2327.385178] [<ffffffff8100c0b5>] invalid_op+0x15/0x20 [ 2327.391134] [<ffffffffa002850c>] ? journal_start+0xec/0xf0 [jbd] [ 2327.398091] [<ffffffffa004c47c>] ext3_journal_start_sb+0x2c/0x50 [ext3] [ 2327.405184] [<ffffffffa00461b8>] ext3_dirty_inode+0x38/0x90 [ext3] [ 2327.412338] [<ffffffff81136995>] __mark_inode_dirty+0x35/0x180 [ 2327.419145] [<ffffffff8112c545>] file_update_time+0xe5/0x190 [ 2327.425788] [<ffffffff810d2ec2>] __generic_file_aio_write+0x232/0x420 [ 2327.432710] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2327.440027] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2327.447403] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2327.454457] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2327.460357] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2327.467694] [<ffffffff810929bc>] ? do_acct_process+0x23c/0x4e0 [ 2327.474443] [<ffffffff81092af2>] do_acct_process+0x372/0x4e0 [ 2327.481015] [<ffffffff810928d0>] ? do_acct_process+0x150/0x4e0 [ 2327.487292] [<ffffffff81092ccc>] acct_process+0x6c/0xa0 [ 2327.493438] [<ffffffff810541d5>] do_exit+0x715/0x7d0 [ 2327.499288] [<ffffffff8100f8d7>] oops_end+0xa7/0xb0 [ 2327.504642] [<ffffffff8100fad6>] die+0x56/0x90 [ 2327.510016] [<ffffffff8100c820>] do_trap+0x130/0x150 [ 2327.515443] [<ffffffff8100ce90>] do_invalid_op+0x90/0xb0 [ 2327.521683] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2327.529729] [<ffffffff8100c0b5>] invalid_op+0x15/0x20 [ 2327.535692] [<ffffffffa06227ec>] ? ext4_da_get_block_prep+0x29c/0x2b0 [ext4] [ 2327.543317] [<ffffffffa06226bb>] ? ext4_da_get_block_prep+0x16b/0x2b0 [ext4] [ 2327.551370] [<ffffffff8113d15c>] __block_prepare_write+0x27c/0x440 [ 2327.558548] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2327.566468] [<ffffffff810dbb92>] ? __lru_cache_add+0x72/0xb0 [ 2327.573107] [<ffffffff8113d3b9>] block_write_begin+0x59/0xe0 [ 2327.579265] [<ffffffffa0621612>] ext4_da_write_begin+0x182/0x280 [ext4] [ 2327.586875] [<ffffffffa0622550>] ? ext4_da_get_block_prep+0x0/0x2b0 [ext4] [ 2327.594734] [<ffffffff810d29aa>] generic_file_buffered_write+0x10a/0x290 [ 2327.602514] [<ffffffff810d2ef6>] __generic_file_aio_write+0x266/0x420 [ 2327.609481] [<ffffffff810d30f6>] ? generic_file_aio_write+0x46/0xb0 [ 2327.616754] [<ffffffff810d310c>] generic_file_aio_write+0x5c/0xb0 [ 2327.623814] [<ffffffffa0617f06>] ext4_file_write+0x46/0xb0 [ext4] [ 2327.630806] [<ffffffff81114f11>] do_sync_write+0xf1/0x130 [ 2327.636631] [<ffffffff8106e640>] ? autoremove_wake_function+0x0/0x40 [ 2327.643976] [<ffffffff810a4762>] ? audit_filter_syscall+0x92/0x190 [ 2327.651166] [<ffffffff810a470a>] ? audit_filter_syscall+0x3a/0x190 [ 2327.657789] [<ffffffff810a469f>] ? audit_filter_inodes+0x19f/0x1d0 [ 2327.664872] [<ffffffff81199491>] ? security_file_permission+0x11/0x20 [ 2327.672317] [<ffffffff81115737>] vfs_write+0xc7/0x1a0 [ 2327.678300] [<ffffffff81115e40>] sys_write+0x50/0x90 [ 2327.683724] [<ffffffff8100b2ab>] system_call_fastpath+0x16/0x1b > > Thanks! > > Ric > > > > >On Sun, Jan 24, 2010 at 04:48:53AM -0500, tytso@....edu wrote: > >>On Sun, Jan 24, 2010 at 08:19:43AM +0100, Nikola Ciprich wrote: > >>>Hi, > >>>yes, I can reproduce it reliably, I'll give it a try tomorrow and > >>>report. > >>>have a nice day. > >>Thanks, I appreciate it. If it does reproduce on 2.6.33-rc3+, could > >>you send me the output of "dumpe2fs -h /dev/XXX"? > >> > >>Best regards, > >> > >> - Ted > >>-- > >>To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > >>the body of a message to majordomo@...r.kernel.org > >>More majordomo info at http://vger.kernel.org/majordomo-info.html > >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- ------------------------------------- Ing. Nikola CIPRICH LinuxBox.cz, s.r.o. 28. rijna 168, 709 01 Ostrava tel.: +420 596 603 142 fax: +420 596 621 273 mobil: +420 777 093 799 www.linuxbox.cz mobil servis: +420 737 238 656 email servis: servis@...uxbox.cz ------------------------------------- -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists