Message-ID: <20100407214631.GL3206@redhat.com>
Date:	Wed, 7 Apr 2010 17:46:31 -0400
From:	Vivek Goyal <vgoyal@...hat.com>
To:	Jeff Moyer <jmoyer@...hat.com>
Cc:	"Theodore Ts'o" <tytso@....edu>, jens.axboe@...cle.com,
	linux-ext4@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [patch,rfc v2] ext3/4: enhance fsync performance when using cfq

On Wed, Apr 07, 2010 at 05:18:12PM -0400, Jeff Moyer wrote:
> Hi again,
> 
> So, here's another stab at fixing this.  This patch is very much an RFC,
> so do not pull it into anything bound for Linus.  ;-)  For those new to
> this topic, here is the original posting:  http://lkml.org/lkml/2010/4/1/344
> 
> The basic problem is that, when running iozone on smallish files (up to
> 8MB in size) and including fsync in the timings, deadline outperforms
> CFQ by a factor of about 5 for 64KB files, and by about 10% for 8MB
> files.  From examining the blktrace data, it appears that iozone will
> issue an fsync() call, and will have to wait until it's CFQ timeslice
> has expired before the journal thread can run to actually commit data to
> disk.
> 
> The approach below puts an explicit call into the filesystem-specific
> fsync code to yield the disk so that the jbd[2] process has a chance to
> issue I/O.  This bring performance of CFQ in line with deadline.
> 
> There is one outstanding issue with the patch that Vivek pointed out.
> Basically, this could starve out the sync-noidle workload if there is a
> lot of fsync-ing going on.  I'll address that in a follow-on patch.  For
> now, I wanted to get the idea out there for others to comment on.
> 
> Thanks a ton to Vivek for spotting the problem with the initial
> approach, and for his continued review.
> 

Thanks Jeff. Conceptually this appraoch makes lot of sense to me. Higher
layers explicitly telling CFQ not to idle/yield the slice.

My firefox timing test is perfoming much better now.

real	0m15.957s
user	0m0.608s
sys	0m0.165s

real	0m12.984s
user	0m0.602s
sys	0m0.148s

real	0m13.057s
user	0m0.624s
sys	0m0.145s

So we got to take care of two issues now.

- Make it work with dm/md devices also. Somehow shall have to propogate
  this yield semantic down the stack.

- The issue of making sure we don't yield if we are servicing sync-noidle
  tree and there is other IO going on which relies on sync-noidle tree
  idling (as you have already mentioned).


[..]
> +static void cfq_yield(struct request_queue *q)
> +{
> +	struct cfq_data *cfqd = q->elevator->elevator_data;
> +	struct cfq_io_context *cic;
> +	struct cfq_queue *cfqq;
> +	unsigned long flags;
> +
> +	cic = cfq_cic_lookup(cfqd, current->io_context);
> +	if (!cic)
> +		return;
> +
> +	spin_lock_irqsave(q->queue_lock, flags);
> +
> +	/*
> +	 * This is primarily called to ensure that the long synchronous
> +	 * time slice does not prevent other I/O happenning (like journal
> +	 * commits) while we idle waiting for it.  Thus, check to see if the
> +	 * current cfqq is the sync cfqq for this process.
> +	 */
> +	cfqq = cic_to_cfqq(cic, 1);
> +	if (!cfqq)
> +		goto out_unlock;
> +
> +	if (cfqd->active_queue != cfqq)
> +		goto out_unlock;
> +
> +	cfq_log_cfqq(cfqd, cfqq, "yielding queue");
> +
> +	__cfq_slice_expired(cfqd, cfqq, 1);
> +	__blk_run_queue(cfqd->queue);

I think it would be good if we also check that cfqq is empty or not. If cfqq
is not empty we don't want to give up slice? But this is a minor point. At
least in case of fsync, we seem to be waiting for all the iozone request
to finish and then calling yield. So cfqq should be empty at this point of
time. 

Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists