Message-ID: <4D515F0D.1030902@redhat.com>
Date:	Tue, 08 Feb 2011 09:19:41 -0600
From:	Eric Sandeen <sandeen@...hat.com>
To:	bryan.coleman@...t.biz
CC:	linux-ext4@...r.kernel.org, "Ted Ts'o" <tytso@....edu>
Subject: Re: ext4 problems with external RAID array via SAS connection

On 2/8/11 8:50 AM, bryan.coleman@...t.biz wrote:
> Well, I attempted to run fsck on the problem drive using the script 
> command to capture the transcript; however, it failed to read a block from 
> the file system.  The exception was "fsck.ext4: Attempt to read block from 
> filesystem resulted in short read while trying to open 
> /dev/mapper/vg_storage-lv_storage". 
> 
> Other messages that are now in /var/log/messages:
> 
> Buffer I/O error on device dm-2, logical block 0
> lost page write due to I/O error on dm-2
> EXT4-fs (dm-2): previous I/O error to superblock detected
> Buffer I/O error on device dm-2, logical block 0
> lost page write due to I/O error on dm-2
> Buffer I/O error on device dm-2, logical block 0
> Buffer I/O error on device dm-2, logical block 1
> Buffer I/O error on device dm-2, logical block 2
> Buffer I/O error on device dm-2, logical block 3
> Buffer I/O error on device dm-2, logical block 0
> EXT4-fs (dm-2): unable to read superblock
> 
> 
> Since it looks like I need to start the process all over again, is there a 
> good way to quickly determine if the problem is hardware related?  Is 
> there a preferred method that will stress test the drive and shed more 
> light on what might be going wrong?

You have a hardware problem... "Buffer I/O error on device dm-2, logical block 0"
means that you failed to read the first block on that device; not something
e2fsck can fix, I'm afraid; you'll need to sort out what's wrong with the storage,
first.

-Eric

> Thank you,
> 
> Bryan
> 
> 
> 
> From:   bryan.coleman@...t.biz
> To:     linux-ext4@...r.kernel.org, linux-ext4-owner@...r.kernel.org
> Date:   02/08/2011 08:19 AM
> Subject:        Re: ext4 problems with external RAID array via SAS 
> connection
> Sent by:        linux-ext4-owner@...r.kernel.org
> 
> 
> 
> When I ran fsck after the first bout of failure, it did report a lot of 
> errors.  I do not have a copy of that fsck transcript; however, I have not 
> 
> yet run fsck since my second attempt.  Is there a method of capturing the 
> transcript that is preferred?
> 
> Bryan
> 
> 
> 
> From:   Ted Ts'o <tytso@....edu>
> To:     bryan.coleman@...t.biz
> Cc:     linux-ext4@...r.kernel.org
> Date:   02/07/2011 05:55 PM
> Subject:        Re: ext4 problems with external RAID array via SAS 
> connection
> Sent by:        linux-ext4-owner@...r.kernel.org
> 
> 
> 
> On Mon, Feb 07, 2011 at 01:53:18PM -0500, bryan.coleman@...t.biz wrote:
>> I am experiencing problems with an ext4 file system.
>>
>> At first, the drive seemed to work fine.  I was primarily copying things 
> 
> 
>> to the drive migrating data from another server.  After many GBs of 
> data, 
>> that seemingly successfully were done being transferred, I started 
> seeing 
>> ext4 errors in /var/log/messages.  I then unmounted the drive and ran 
> fsck 
>> on it (which took multiple hours to run).  I then ls'ed around and one 
> of 
>> the areas caused the system to again throw ext4 errors.
> 
> Did fsck report any errors?  Do you have a copy of your fsck
> transcript?
> 
> The errors you've reported do make me suspicious that there's
> something unstable with your hardware...
> 
>   - Ted
> --
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists