| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4DE9333F.2020901@linux.vnet.ibm.com>
Date: Fri, 03 Jun 2011 12:17:19 -0700
From: Allison Henderson <achender@...ux.vnet.ibm.com>
To: linux-fsdevel <linux-fsdevel@...r.kernel.org>,
Ext4 Developers List <linux-ext4@...r.kernel.org>,
xfs-oss <xfs@....sgi.com>
Subject: Fwd: Re: [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252
punch hole test to cover additional corner cases
-------- Original Message --------
Subject: Re: [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252 punch hole test to cover additional corner cases
Date: Wed, 01 Jun 2011 16:01:42 -0700
From: Allison Henderson <achender@...ux.vnet.ibm.com>
To: xfs-oss <xfs@....sgi.com>
On 5/25/2011 7:34 PM, Allison Henderson wrote:
> This patch adds additional punch hole tests to 252
> that were used to test ext4 punch hole. The _test_generic_punch
> routine has been modified to accept two new flags:
>
> -k To keep the test file between tests.
> This will test the handling of existing holes
>
> -d To not sync the file between tests.
> This will test the handling of delayed extents
>
> Four new corner cases have also been added to the routine:
> 14. data -> hole @ EOF
> 15. data -> hole @ 0
> 16. data -> cache cold ->hole
> 17. data -> hole in single block file
>
>
> Signed-off-by: Allison Henderson<achender@...ibm.com>
>
> ---
> :100755 100755 dfdf3f8... 5efa243... M 252
> :100644 100644 cd8e4b4... 930c924... M 252.out
> :100644 100644 e2da5d8... ddf63b0... M common.punch
> 252 | 10 +++
> 252.out | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> common.punch | 150 ++++++++++++++++++++++++++++++++++++++-------
> 3 files changed, 330 insertions(+), 22 deletions(-)
>
> diff --git a/252 b/252
> index dfdf3f8..5efa243 100755
> --- a/252
> +++ b/252
> @@ -52,6 +52,16 @@ _require_xfs_io_fiemap
>
> testfile=$TEST_DIR/252.$$
>
> +# Standard punch hole tests
> _test_generic_punch falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
>
> +# Delayed allocation punch hole tests
> +_test_generic_punch -d falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> +# Multi hole punch tests
> +_test_generic_punch -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> +# Delayed allocation multi punch hole tests
> +_test_generic_punch -d -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> status=0 ; exit
> diff --git a/252.out b/252.out
> index cd8e4b4..930c924 100644
> --- a/252.out
> +++ b/252.out
> @@ -45,3 +45,195 @@ QA output created by 252
> 0: [0..7]: data
> 1: [8..31]: hole
> 2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: unwritten
> +1: [8..23]: hole
> +2: [24..39]: unwritten
> + 4. hole -> data
> +0: [0..23]: hole
> +1: [24..31]: data
> +2: [32..39]: hole
> + 5. hole -> unwritten
> +0: [0..23]: hole
> +1: [24..31]: unwritten
> +2: [32..39]: hole
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..31]: unwritten
> +3: [32..39]: hole
> + 8. unwritten -> hole
> +0: [0..7]: unwritten
> +1: [8..39]: hole
> + 9. unwritten -> data
> +0: [0..7]: unwritten
> +1: [8..23]: hole
> +2: [24..31]: data
> +3: [32..39]: hole
> + 10. hole -> data -> hole
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: unwritten
> +1: [8..31]: hole
> +2: [32..39]: unwritten
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 4. hole -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 5. hole -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 8. unwritten -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 9. unwritten -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 10. hole -> data -> hole
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 4. hole -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 5. hole -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 8. unwritten -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 9. unwritten -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 10. hole -> data -> hole
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> diff --git a/common.punch b/common.punch
> index e2da5d8..ddf63b0 100644
> --- a/common.punch
> +++ b/common.punch
> @@ -256,8 +256,39 @@ die_now()
> # 11. data -> hole -> data
> # 12. unwritten -> data -> unwritten
> # 13. data -> unwritten -> data
> +# 14. data -> hole @ EOF
> +# 15. data -> hole @ 0
> +# 16. data -> cache cold ->hole
> +# 17. data -> hole in single block file
> +#
> +# Test file is removed, created and sync'd between tests.
> +#
> +# Use -k flag to keep the file between tests. This will
> +# test the handling of pre-existing holes.
> +#
> +# Use the -d flag to not sync the file between tests.
> +# This will test the handling of delayed extents
> +#
> _test_generic_punch()
> {
> +
> + remove_testfile=1
> + sync_cmd="-c fsync"
> + OPTIND=1
> + while getopts 'dk' OPTION
> + do
> + case $OPTION in
> + k) remove_testfile=
> + ;;
> + d) sync_cmd=
> + ;;
> + ?) echo Invalid flag
> + exit 1
> + ;;
> + esac
> + done
> + shift $(($OPTIND - 1))
> +
> alloc_cmd=$1
> punch_cmd=$2
> zero_cmd=$3 #if not testing zero just set to punch
> @@ -267,22 +298,28 @@ _test_generic_punch()
> xfs_io_opt=$7 #needs to be -F if not testing xfs
>
> echo " 1. into a hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 2. into allocated space"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 20k" -c "fsync" \
> + -c "pwrite 0 20k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 3. into unwritten space"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> -c "$zero_cmd 4k 8k" \
> @@ -290,15 +327,19 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 4. hole -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 8k 8k" -c "fsync" \
> + -c "pwrite 8k 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 5. hole -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 8k 8k" \
> -c "$zero_cmd 4k 8k" \
> @@ -306,24 +347,30 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 6. data -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 8k" -c "fsync" \
> + -c "pwrite 0 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 7. data -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 8k" -c "fsync" \
> + -c "pwrite 0 8k" $sync_cmd \
> -c "$alloc_cmd 8k 8k" \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 8. unwritten -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 8k" \
> -c "$zero_cmd 4k 8k" \
> @@ -331,49 +378,108 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 9. unwritten -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 8k" \
> - -c "pwrite 8k 8k" -c "fsync" \
> + -c "pwrite 8k 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 10. hole -> data -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 8k 4k" -c "fsync" \
> + -c "pwrite 8k 4k" $sync_cmd \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 11. data -> hole -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> -c "pwrite 0 8k" \
> - -c "pwrite 12k 8k" -c "fsync" \
> + -c "pwrite 12k 8k" $sync_cmd \
> -c "$punch_cmd 8k 4k" \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 12. unwritten -> data -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> - -c "pwrite 8k 4k" -c "fsync" \
> + -c "pwrite 8k 4k" $sync_cmd \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
Hi all,
I had some questions about test 12. The output for this test is:
12. unwritten -> data -> unwritten
0: [0..7]: unwritten
1: [8..31]: hole
2: [32..39]: unwritten
But ext4 gets data extents here instead of unwritten extents (on the
first test with the fsync flag on). I did some investigating and it
looks like the fsync command causes the extents to be written out before
the punch hole operation even starts. So it makes sense to me that it
should end up with data extents. Can someone explain why the golden
output has unwritten extents here? Thx!
Allison Henderson
>
> echo " 13. data -> unwritten -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> - -c "pwrite 0k 8k" -c "fsync" \
> + -c "pwrite 0k 8k" $sync_cmd \
> -c "pwrite 12k 8k" -c "fsync" \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
> +
> + echo " 14. data -> hole @ EOF"
> + rm -f $testfile
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 12k 8k" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> + echo " 15. data -> hole @ 0"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 0k 8k" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> + echo " 16. data -> cache cold ->hole"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + rm -f $testfile.2
> + else
> + cp $testfile $testfile.2
> + fi
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 8k 12k" -c "fsync" $testfile.2 \
> + > /dev/null
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 0k 8k" \
> + -c "fadvise -d" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + diff $testfile $testfile.2
> + [ $? -ne 0 ]&& die_now
> + rm -f $testfile.2
> +
> + echo " 17. data -> hole in single block file"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> + block_size=`stat -f $TEST_DEV | grep "Block size" | cut -d " " -f3`
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate $block_size" \
> + -c "pwrite 0 $block_size" $sync_cmd \
> + -c "$zero_cmd 128 128" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> }
_______________________________________________
xfs mailing list
xfs@....sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists