linux-ext4 - Re: [PATCH V1 02/17] ext4: Add the basic function for inline data support.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4EA8AB18.2060209@tao.ma>
Date:	Thu, 27 Oct 2011 08:51:36 +0800
From:	Tao Ma <tm@....ma>
To:	Andreas Dilger <aedilger@...il.com>
CC:	linux-ext4@...r.kernel.org, tytso@....edu,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH V1 02/17] ext4: Add the basic function for inline data
 support.

On 10/27/2011 06:28 AM, Andreas Dilger wrote:
> On 2011-10-26, at 8:38 AM, Tao Ma wrote:
>> On 10/26/2011 04:36 PM, Andreas Dilger wrote:
>>> On 2011-10-26, at 1:34 AM, Tao Ma wrote:
>>>> +void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
>>>> +			    void *buffer, loff_t pos, unsigned len)
>>>> +{
>>>> +	header = IHDR(inode, ext4_raw_inode(iloc));
>>>> +	entry = (struct ext4_xattr_entry *)((void *)ext4_raw_inode(iloc) +
>>>> +					    EXT4_I(inode)->i_inline_off);
>>>> +	memcpy((void *)IFIRST(header) + le16_to_cpu(entry->e_value_offs) + pos,
>>>> +	       buffer + pos, len);
>>>> +}
>>>> +
>>>> +int ext4_init_inline_data(handle_t *handle, struct inode *inode,
>>>> +			  struct ext4_iloc *iloc)
>>>> +{
>>>> +	size = ext4_get_max_inline_size(inode);
>>>> +	value = kzalloc(size, GFP_NOFS);
>>>> +	if (!value)
>>>> +		return -ENOMEM;
>>>> +
>>>> +	error = ext4_xattr_ibody_set(handle, inode, &i, &is);
>>>> +}
>>>
>>> Since file data is changed very rarely, instead of consuming the full
>>> xattr space that may not be needed, wouldn't it be better to change
>>> ext4_write_inline_data() to just to the ext4_xattr_ibody_set() to save
>>> the exact-sized buffer into the xattr?  That will allow other xattrs
>>> to be stored in this space as well as the inline data.
>>
>> I am just worried about the cpu usage. You know, the xattr values in
>> ext4 has to be packed so if we change the content of an inline file
>> frequently(say append), the inline xattr value will be removed and added
>> frequently which should consume much cpu cycles.  What's more, the other
>> xattr values has to be moved also if they are not aligned to the end of
>> the inode. I am not sure whether it is good for performance or not.
> 
> I'd also guess it isn't the most CPU efficient mechanism, but the main
> question is whether this extra CPU usage is even noticeable compared
> to the IO time?  Even with the added CPU usage, there is a dramatic
> reduction in the IO (no external block to write), so it would always
> be a net win to do it that way.
It seems so. anyway, I will do some tests for file appending to see how
much these 2 methods differs.
> 
>> Another side effect is that we have to write the whole inline data every
>> time as a new xattr value replace every time while the current solution
>> just needs to memcpy the appended bytes.
> 
> What about only storing a new xattr if the file size is increasing, or
> when it is truncated to zero?  If the write is <= existing xattr size
> then it can use the same mechanism as today (inline overwrite of the
> xattr buffer, and update of the xattr checksum).  That avoids overhead
> for the case of repeatedly writing a small same-size value into the file.
> If some application is appending 1 byte at a time to a file, I think
> the CPU overhead in the xattr code is the least of their worries.
> 
> The main reason I don't like to consume all of the xattr space right
> away is that this will cause OTHER xattrs to immediately be pushed
> into the external xattr block (e.g. selinux, security, etc) and then
> we will be even worse off than before (file data in inode, xattr in
> external block, and added complexity for no benefit).
To be honest, with inode size = 256, we don't have much spaces left in
the inode. With current i_extra_isize 28, we have only 92 bytes left for
xattrs(4 bytes for the xattr header magic and 4 bytes for the gap
between ext4_xattr_entry and the value, 256 - 128 - 28 - 4 - 4). So
considering one ext4_xattr_entry have 16 bytes and with the miminum
namelen of 4, if we support 2 entries(one for inline data and one for a
real xattr), these will take 40 bytes. And only 52 bytes are left. I
don't think these bytes are enough for 2 xattr values. ;) So why not
take all of them(72 bytes)? As for inode size > 256, the inline data
will only takes half of the spaces left and leaves the space for other
xattrs. Does it make sense?

btw, I have no idea of what a normal acl xattr takes, but if it takes
more than 10 bytes, it will almost make the inline dir almost no use,
since we have to store dot and dotdot first and then the real file
names. Too small space isn't good but adds overhead of converting from
inline to external block.

Thanks
Tao
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html