linux-ext4 - [PATCH RESEND 1/7] fs: add new flag(FALLOC_FL_COLLAPSE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1381090366-2727-1-git-send-email-linkinjeon@gmail.com>
Date:	Mon,  7 Oct 2013 05:12:46 +0900
From:	Namjae Jeon <linkinjeon@...il.com>
To:	viro@...iv.linux.org.uk, mtk.manpages@...il.com, tytso@....edu,
	adilger.kernel@...ger.ca, bpm@....com, elder@...nel.org,
	hch@...radead.org, david@...morbit.com
Cc:	linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-ext4@...r.kernel.org, xfs@....sgi.com, a.sangwan@...sung.com,
	Namjae Jeon <linkinjeon@...il.com>,
	Namjae Jeon <namjae.jeon@...sung.com>
Subject: [PATCH RESEND 1/7] fs: add new flag(FALLOC_FL_COLLAPSE_RANGE) for fallocate

From: Namjae Jeon <namjae.jeon@...sung.com>

Add new flag(FALLOC_FL_COLLAPSE_RANGE) for fallocate.
updated detailed semantics in comments.

Signed-off-by: Namjae Jeon <namjae.jeon@...sung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@...sung.com>
---
 fs/open.c                   |   24 +++++++++++++++++++++---
 include/uapi/linux/falloc.h |   17 +++++++++++++++++
 2 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/fs/open.c b/fs/open.c
index 7931f76..85d243a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -225,12 +225,14 @@ int do_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
 {
 	struct inode *inode = file_inode(file);
 	long ret;
+	unsigned blksize_mask = (1 << inode->i_blkbits) - 1;
 
 	if (offset < 0 || len <= 0)
 		return -EINVAL;
 
 	/* Return error if mode is not supported */
-	if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
+	if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
+		     FALLOC_FL_COLLAPSE_RANGE))
 		return -EOPNOTSUPP;
 
 	/* Punch hole must have keep size set */
@@ -241,8 +243,12 @@ int do_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
 	if (!(file->f_mode & FMODE_WRITE))
 		return -EBADF;
 
-	/* It's not possible punch hole on append only file */
-	if (mode & FALLOC_FL_PUNCH_HOLE && IS_APPEND(inode))
+	/*
+	 * It's not possible to punch hole or perform collapse range
+	 * on append only file
+	 */
+	if (mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE)
+	    && IS_APPEND(inode))
 		return -EPERM;
 
 	if (IS_IMMUTABLE(inode))
@@ -270,6 +276,18 @@ int do_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
 	if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
 		return -EFBIG;
 
+	/*
+	 * Collapse range works only on fs block size aligned offsets.
+	 * Check if collapse range is contained within (aligned)i_size.
+	 * Collapse range can only be used exclusively.
+	 */
+	if ((mode & FALLOC_FL_COLLAPSE_RANGE) &&
+	    (offset & blksize_mask || len & blksize_mask ||
+	     mode & ~FALLOC_FL_COLLAPSE_RANGE ||
+	     (offset + len >
+	      round_up(i_size_read(inode), (blksize_mask + 1)))))
+		return -EINVAL;
+
 	if (!file->f_op->fallocate)
 		return -EOPNOTSUPP;
 
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
index 990c4cc..9614b72 100644
--- a/include/uapi/linux/falloc.h
+++ b/include/uapi/linux/falloc.h
@@ -4,6 +4,23 @@
 #define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
 #define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
 #define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+/*
+ * FALLOC_FL_COLLAPSE_RANGE:
+ * This flag works in 2 steps.
+ * Firstly, it deallocates any data blocks present between [offset, offset+len)
+ * This step is same as punch hole and leaves a hole in the place from where
+ * the blocks are removed.
+ * Next, it eliminates the hole created by moving data blocks into it.
+ * For extent based file systems, we achieve this functionality simply by
+ * updating the starting logical offset of each extent which appears beyond
+ * the hole. As this flag works on blocks of filesystem, the offset and len
+ * provided to fallocate should be aligned with block size of filesystem.
+ * The semantics of this flag are:
+ * 1) It should be used exclusively. No other fallocate flag in combination.
+ * 2) Offset and len supplied to fallocate should be aligned with block size.
+ * 3) (offset + len) could not be greater than file size.
+ */
+#define FALLOC_FL_COLLAPSE_RANGE	0x08 /* it does not leave a hole */
 
 
 #endif /* _UAPI_FALLOC_H_ */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html