Message-ID: <20140131030652.GK13997@dastard>
Date:	Fri, 31 Jan 2014 14:06:52 +1100
From:	Dave Chinner <david@...morbit.com>
To:	Matthew Wilcox <matthew.r.wilcox@...el.com>
Cc:	linux-kernel@...r.kernel.org, linux-fsdevel@...r.kernel.org,
	linux-mm@...ck.org, linux-ext4@...r.kernel.org
Subject: Re: [PATCH v5 00/22] Rewrite XIP code and add XIP support to ext4

On Thu, Jan 30, 2014 at 08:25:37PM +1100, Dave Chinner wrote:
> On Thu, Jan 30, 2014 at 05:42:30PM +1100, Dave Chinner wrote:
> > On Wed, Jan 15, 2014 at 08:24:18PM -0500, Matthew Wilcox wrote:
> > > This series of patches add support for XIP to ext4.  Unfortunately,
> > > it turns out to be necessary to rewrite the existing XIP support code
> > > first due to races that are unfixable in the current design.
> > > 
> > > Since v4 of this patchset, I've improved the documentation, fixed a
> > > couple of warnings that a newer version of gcc emitted, and fixed a
> > > bug where we would read/write the wrong address for I/Os that were not
> > > aligned to PAGE_SIZE.
> > 
> > Looks like there's something fundamentally broken with the patch set
> > as it stands. I get this same data corruption on both ext4 and XFS
> > with XIP using fsx. It's as basic as it gets - the first read after
> > a mmapped write fails to see the data written by mmap:
> > 
> > $ sudo mkfs.xfs -f /dev/ram0
> > meta-data=/dev/ram0              isize=256    agcount=4, agsize=256000 blks
> >          =                       sectsz=512   attr=2, projid32bit=1
> >          =                       crc=0
> > data     =                       bsize=4096   blocks=1024000, imaxpct=25
> >          =                       sunit=0      swidth=0 blks
> > naming   =version 2              bsize=4096   ascii-ci=0 ftype=0
> > log      =internal log           bsize=4096   blocks=12800, version=2
> >          =                       sectsz=512   sunit=0 blks, lazy-count=1
> > realtime =none                   extsz=4096   blocks=0, rtextents=0
> > $ sudo mount -o xip /dev/ram0 /mnt/scr
> > $ sudo chmod 777 /mnt/scr
> > $ ltp/fsx -d -N 1000 -S 0 /mnt/scr/fsx
> ....
> > operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops
> > LOG DUMP (9 total operations):
> > 1(  1 mod 256): MAPWRITE 0x3db39 thru 0x3ffff   (0x24c7 bytes)
> > 2(  2 mod 256): MAPREAD  0x2e947 thru 0x33163   (0x481d bytes)
> > 3(  3 mod 256): READ     0x2e836 thru 0x3cba1   (0xe36c bytes)
> > 4(  4 mod 256): PUNCH    0x2e7 thru 0x5c42      (0x595c bytes)
> > 5(  5 mod 256): MAPWRITE 0xcaea thru 0x13ba9    (0x70c0 bytes)  ******WWWW
> > 6(  6 mod 256): PUNCH    0x31645 thru 0x38d1c   (0x76d8 bytes)
> > 7(  7 mod 256): FALLOC   0x24f92 thru 0x2f2b7   (0xa325 bytes) INTERIOR
> > 8(  8 mod 256): FALLOC   0xbcf1 thru 0x171ac    (0xb4bb bytes) INTERIOR ******FFFF
> > 9(  9 mod 256): READ     0x126f thru 0x11136    (0xfec8 bytes)  ***RRRR***
> > Correct content saved for comparison
> > (maybe hexdump "/mnt/scr/fsx" vs "/mnt/scr/fsx.fsxgood")
> > 
> > XFS gives a good indication that we aren't doing something correctly
> > w.r.t. mapped XIP writes, as trying to fiemap the file ASSERT fails
> > with a delayed allocation extent somewhere inside the file after a
> > sync. I shall keep digging.
> 
> Ok, I understand the XFS ASSERT failure, but I don't really
> understand the reason for the read failure. XFS assert failed
> because I was using the delayed allocation enabled xfs_get_blocks()
> to xip_fault/xip_mkwrite, so it was creating a delalloc extent
> rather than allocating blocks, and then not having any pages in the
> page cache to write back to convert the delalloc extent. This
> doesn't explain the zeros being read, though.
> 
> So I changed to use the direct IO version, and that leaves me with
> an unwritten extent over the mapped write code. Why? Because there's
> no IO completion being run from either xip_fault() or xip_mkwrite()
> to zero the buffers and run IO completion to convert the extent to
> written....
> 
> $ xfs_io -f -c "truncate 8k" -c "mmap 0 8k" -c "mwrite 0 4k" \
> > -c "bmap -vp" -c "pread -v 0 8k" -c "bmap -vp" /mnt/scr/foo
> ....
> /mnt/scr/foo:
>  EXT: FILE-OFFSET      BLOCK-RANGE      AG AG-OFFSET        TOTAL FLAGS
>    0: [0..7]:          224..231          0 (224..231)           8 10000
>    1: [8..15]:         hole                                     8
> $
> 
> We're trying to do something that the get_block callback has never
> supported.  I note that you added zeroing to ext4_map_blocks() when
> an unwritten extent is found and call xip_clear_blocks() from there
> to try and handle this within the allocation context without
> actually making it obvious why it is necessary.
> 
> Essentially what we need get_blocks(create = 1) to do here is this:
> 
> 	if (hole)
> 		transactionally allocate and zero block in requested region
> 	if (unwritten)
> 		transactionally convert to written and zero block
> 	if (written)
> 		map blocks
> 
> I think we can get away with this from a crash recovery perspective
> because the zeroing of the blocks is synchronous and within the
> allocation transaction. I'm implementing a new xfs_get_blocks_xip to
> do keep this new behaviour "separate" from the direct IO path
> semantics.
> 
> I also got rid of the read block map followed by the "create" block
> map. Just a single call with create set appropriately for the caller
> context is all that is required - the getblock call will do the
> correct thing for allocation/conversion cases and if there's already
> a block there it will just return the mapping....
> 
> <hack, hack>
> 
> OK, I've fixed something. The above xfs_io test returns the correct
> data on read now, fsx still fails. I'll keep working on it in the
> morning, and when I have something that works I'll post it....

The read/write path is broken, Willy. We can't map arbitrary byte
ranges to the DIO subsystem. I'm now certain that the data
corruptions I'm seeing are in sub-sector regions from unaligned IOs
from userspace. We still need to use the buffered IO path for non
O_DIRECT IO to avoid these problems. I think I've worked out a way
to short-circuit page cache lookups for the buffered IO path, so
stay tuned....

Cheers,

Dave.
-- 
Dave Chinner
david@...morbit.com
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists