Message-ID: <CAOQ4uxjtf8_y7Hmb4GU9YN7DvMa7WNtpeRzGoK5m2=Vw=ChStA@mail.gmail.com>
Date:   Wed, 11 Oct 2017 16:34:00 +0300
From:   Amir Goldstein <amir73il@...il.com>
To:     Ashlie Martinez <ashmrtn@...xas.edu>
Cc:     Xiao Yang <yangx.jy@...fujitsu.com>,
        "Theodore Ts'o" <tytso@....edu>, Eryu Guan <eguan@...hat.com>,
        Josef Bacik <jbacik@...com>, fstests <fstests@...r.kernel.org>,
        Ext4 <linux-ext4@...r.kernel.org>,
        Vijay Chidambaram <vvijay03@...il.com>
Subject: Re: [PATCH] ext4: fix interaction between i_size, fallocate, and
 delalloc after a crash

On Wed, Oct 11, 2017 at 4:17 PM, Ashlie Martinez <ashmrtn@...xas.edu> wrote:
> On Wed, Oct 11, 2017 at 6:11 AM, Xiao Yang <yangx.jy@...fujitsu.com> wrote:
>> On 2017/10/07 11:29, Theodore Ts'o wrote:
>>>
>>> On Thu, Oct 05, 2017 at 07:34:10PM -0500, Ashlie Martinez wrote:
>>>>>>
>>>>>> It almost seems that way, though to be honest, I don't think I know
>>>>>> enough about 1. the setup used by Amir and 2. all the internal working
>>>>>> of KVM+virtio to say for sure.
>>>>>
>>>>> I believe you misread my email.
>>>>> The problem was NOT reproduced on KVM+virtio.
>>>>> The problem *is* reproduced on a 10G LVM volume over SSD on
>>>>> Ubuntu 16.04 with latest kernel and latest e2fsprogs.
>>>
>>> I was able to reproduce it using both kvm-xfstests[1] and gce-xfstests[2].
>>>
>>> [1]
>>> https://github.com/tytso/xfstests-bld/blob/master/Documentation/kvm-xfstests.md
>>> [2] https://thunk.org/gce-xfstests
>>>
>>> It did turn out to be timing related, and it requires that a journal
>>> commit take place after fsstress runs, but it can *not* be triggered
>>> by a sync/fsync (as this would cause the delayed allocation writes to
>>> be forced out to disk, and that makes the problem go away).
>
> Amir,
>
> I was actually looking into why only some machines can reproduce the
> output from generic/456 and I found that I was a little unsure about
> exactly how the test itself was operating. I'm not an expert on how
> device mapper works, so I was wondering if you could help shed some
> light on it.
>
> From what I've surmised from the test case, it replays the workload
> you specified with fsx and then immediately inserts the dm_flakey
> table and device in place of the hard disk *while requests are still
> in flight* (see nolockfs flag in dmsetup which is used by dm_flakey
> calls). The flakey device drops all requests sent to it. The flakey
> device is then unmounted (to force all pending writes out), the dm
> table changed once again back to the original backing block device,
> and then mounted again.
>
> Is this summary of the test case correct? If it is, then perhaps the
> reason why it is so hard for some people to reproduce the exact bug
> output you saw is because there does not appear to be anything in the
> test case that specifies the timing for when dm_flakey should begin
> dropping requests. Since the flakey device could be inserted any time
> after fsx completes, but writes are still pending, it seems like the
> test creates a race condition between inserting dm_flakey and a kernel
> thread waking up to persist writes. This race condition would likely
> be affected by things like having > 1 core on the VM or hardware (so
> that dm_flakey could be inserted at the same time a kernel thread on
> another core is trying to persist writes) the test is running on,
> system load, dirty writeback times, etc.
>
> Do you have any thoughts on the above?

Sounds about right.
Having more cores to the VM was my first guess as the reason.
Note that all the bugs I found so far depended on some timing between
processes or kernel threads, so crash monkey trying all io completion
combinations would not have helped. Maybe it would help to find other
bugs though.

>
>>>
>>> I initially tried using xfs_io as a replacement for fsstress (since it
>>> is more flexible and would allow me to more easily run experiments),
>>> but it turns out xfs_io was too fast/efficient, and so using xfs_io to
>>> execute the same system calls (verified by strace) would not replicate
>>> the problem.
>>>
>>>>> Now you have a broken file system image and the exact set of operations
>>>>> that led to it. That's should be a pretty big lead for investigation.
>>>
>>> It was indeed a big lead for investigation (thanks, Amir!), but it
>>> still took me several hours before I was finally able to figure out
>>> the problem.  The patch and the commit description should explain what
>>> was going on.
>>>
>>> I'll leave it to Ashlie and Vijay to investigate how to improve Crash
>>> Monkey so it can better find problems like this automatically.  Since
>>> you now have a clear reproducer (you can use generic/456 and run it on
>>> gce-xfstests, using is a standard cloud VM configuration) and an
>>> explanation of the bug and the four-line fix, I suspect this might be
>>> good grist for follow-on research after your Hot Storage '17 workshop
>>> paper.  :-)
>>>
>>> Best regards,
>>>
>>>                                         - Ted
>>>
>>>
>>> commit 3912e7b44cf77e9452d4d0cb6c1da9c7043bb7f1
>>> Author: Theodore Ts'o<tytso@....edu>
>>> Date:   Fri Oct 6 23:09:55 2017 -0400
>>>
>>>      ext4: fix interaction between i_size, fallocate, and delalloc after a
>>> crash
>>
>> Hi Theodore,
>>
>> After applying your patch, generic/456 always passes on my system which just
>> triggers the output[2].
>> So i could believe this two different outputs[1][2] are triggered by
>> different environments, but they
>> are caused by the same bug which your patch fixes.  Is this right?
>>
>> [1] Inode 12, end of extent exceeds allowed value(logical block 33, physical
>> block 33441, len 7)Clear? no
>>       Inode 12, i_blocks is 184, should be 128. Fix? no
>> [2] Inode 12, i_size is 147456, should be 163840. Fix? no
>>
>> Sorry, i am not familiar with ext4.
>>
>> Thanks,
>> Xiao Yang
>>>
>>>
>>>      If there are pending writes subject to delayed allocation, then
>>> i_size
>>>      will show size after the writes have completed, while i_disksize
>>>      contains the value of i_size on the disk (since the writes have not
>>>      been persisted to disk).
>>>
>>>      If fallocate(2) is called with the FALLOC_FL_KEEP_SIZE flag, either
>>>      with or without the FALLOC_FL_ZERO_RANGE flag set, and the new size
>>>      after the fallocate(2) is between i_size and i_disksize, then after a
>>>      crash, if a journal commit has resulted in the changes made by the
>>>      fallocate() call to be persisted after a crash, but the delayed
>>>      allocation write has not resolved itself, i_size would not be
>>> updated,
>>>      and this would cause the following e2fsck complaint:
>>>
>>>      Inode 12, end of extent exceeds allowed value
>>>              (logical block 33, physical block 33441, len 7)
>>>
>>>      This can only take place on a sparse file, where the fallocate(2)
>>> call
>>>      is allocating blocks in a range which is before a pending delayed
>>>      allocation write which is extending i_size.  Since this situation is
>>>      quite rare, and the window in which the crash must take place is
>>>      typically<  30 seconds, in practice this condition will rarely
>>> happen.
>>>
>>>      Nevertheless, it can be triggered in testing, and in particular by
>>>      xfstests generic/456.
>>>
>>>      Signed-off-by: Theodore Ts'o<tytso@....edu>
>>>      Reported-by: Amir Goldstein<amir73il@...il.com>
>>>      Cc: stable@...r.kernel.org
>>>
>>> diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
>>> index 97f0fd06728d..07bca11749d4 100644
>>> --- a/fs/ext4/extents.c
>>> +++ b/fs/ext4/extents.c
>>> @@ -4794,7 +4794,8 @@ static long ext4_zero_range(struct file *file,
>>> loff_t offset,
>>>         }
>>>
>>>         if (!(mode&  FALLOC_FL_KEEP_SIZE)&&
>>> -            offset + len>  i_size_read(inode)) {
>>> +           (offset + len>  i_size_read(inode) ||
>>> +            offset + len>  EXT4_I(inode)->i_disksize)) {
>>>                 new_size = offset + len;
>>>                 ret = inode_newsize_ok(inode, new_size);
>>>                 if (ret)
>>> @@ -4965,7 +4966,8 @@ long ext4_fallocate(struct file *file, int mode,
>>> loff_t offset, loff_t len)
>>>         }
>>>
>>>         if (!(mode&  FALLOC_FL_KEEP_SIZE)&&
>>> -            offset + len>  i_size_read(inode)) {
>>> +           (offset + len>  i_size_read(inode) ||
>>> +            offset + len>  EXT4_I(inode)->i_disksize)) {
>>>                 new_size = offset + len;
>>>                 ret = inode_newsize_ok(inode, new_size);
>>>                 if (ret)
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe fstests" in
>>> the body of a message to majordomo@...r.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>> .
>>>
>>
>>
>>

Powered by blists - more mailing lists