| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180313062953.mwpyzgv6uncok6bl@rh_laptop>
Date: Tue, 13 Mar 2018 07:29:53 +0100
From: Lukas Czerner <lczerner@...hat.com>
To: "Darrick J. Wong" <darrick.wong@...cle.com>
Cc: tytso@....edu, linux-ext4@...r.kernel.org
Subject: Re: [PATCH 4/4] e2scrub: add service (cron, systemd) support
On Mon, Mar 12, 2018 at 09:14:59AM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@...cle.com>
>
> Add the ability to run the e2scrub utilities as a periodically scheduled
> system service.
comment bellow
>
> Signed-off-by: Darrick J. Wong <darrick.wong@...cle.com>
> ---
> MCONFIG.in | 5 +
> configure | 179 ++++++++++++++++++++++++++++++++++++++++
> configure.ac | 74 ++++++++++++++++-
> debian/e2fsprogs.files | 3 +
> debian/e2fsprogs.postinst | 19 ++++
> debian/e2fsprogs.postrm | 35 ++++++++
> scrub/Makefile.in | 90 ++++++++++++++++++++
> scrub/e2scrub.in | 38 +++++++-
> scrub/e2scrub@...rvice.in | 20 ++++
> scrub/e2scrub_all.cron.in | 2
> scrub/e2scrub_all.in | 38 ++++++++
> scrub/e2scrub_all.service.in | 10 ++
> scrub/e2scrub_all.timer.in | 11 ++
> scrub/e2scrub_all_cron.in | 68 +++++++++++++++
> scrub/e2scrub_fail.in | 25 ++++++
> scrub/e2scrub_fail@...rvice.in | 10 ++
> scrub/e2scrub_reap.in | 48 +++++++++++
> scrub/e2scrub_reap.service.in | 21 +++++
> util/subst.conf.in | 3 +
> 19 files changed, 684 insertions(+), 15 deletions(-)
> create mode 100644 debian/e2fsprogs.postrm
> create mode 100644 scrub/e2scrub@...rvice.in
> create mode 100644 scrub/e2scrub_all.cron.in
> create mode 100644 scrub/e2scrub_all.service.in
> create mode 100644 scrub/e2scrub_all.timer.in
> create mode 100644 scrub/e2scrub_all_cron.in
> create mode 100644 scrub/e2scrub_fail.in
> create mode 100644 scrub/e2scrub_fail@...rvice.in
> create mode 100644 scrub/e2scrub_reap.in
> create mode 100644 scrub/e2scrub_reap.service.in
>
>
> diff --git a/MCONFIG.in b/MCONFIG.in
> index adeb5bd..ee83554 100644
> --- a/MCONFIG.in
> +++ b/MCONFIG.in
> @@ -32,9 +32,14 @@ man8dir = $(mandir)/man8
> infodir = @infodir@
> datadir = @datadir@
> pkgconfigdir = $(libdir)/pkgconfig
> +pkglibdir = $(libdir)/e2fsprogs
>
> HAVE_UDEV = @have_udev@
> UDEV_RULES_DIR = @pkg_udev_rules_dir@
> +HAVE_CROND = @have_crond@
> +CROND_DIR = @crond_dir@
> +HAVE_SYSTEMD = @have_systemd@
> +SYSTEMD_SYSTEM_UNIT_DIR = @systemd_system_unit_dir@
>
> @SET_MAKE@
>
> diff --git a/configure b/configure
> index 986e057..f6a0dea 100755
> --- a/configure
> +++ b/configure
> @@ -625,6 +625,12 @@ gl_use_threads_default=
> ac_func_list=
> ac_subst_vars='LTLIBOBJS
> LIBOBJS
> +systemd_system_unit_dir
> +have_systemd
> +systemd_LIBS
> +systemd_CFLAGS
> +crond_dir
> +have_crond
> pkg_udev_rules_dir
> have_udev
> udev_LIBS
> @@ -899,6 +905,8 @@ with_libintl_prefix
> enable_fuse2fs
> with_multiarch
> with_udev_rules_dir
> +with_crond_dir
> +with_systemd_unit_dir
> '
> ac_precious_vars='build_alias
> host_alias
> @@ -913,7 +921,9 @@ PKG_CONFIG
> PKG_CONFIG_PATH
> PKG_CONFIG_LIBDIR
> udev_CFLAGS
> -udev_LIBS'
> +udev_LIBS
> +systemd_CFLAGS
> +systemd_LIBS'
>
>
> # Initialize some variables set by options.
> @@ -1591,6 +1601,9 @@ Optional Packages:
> --with-multiarch=ARCH specify the multiarch triplet
> --with-udev-rules-dir[=DIR]
> Install udev rules into DIR.
> + --with-crond-dir[=DIR] Install system crontabs into DIR.
> + --with-systemd-unit-dir[=DIR]
> + Install systemd system units into DIR.
>
> Some influential environment variables:
> CC C compiler command
> @@ -1608,6 +1621,10 @@ Some influential environment variables:
> path overriding pkg-config's built-in search path
> udev_CFLAGS C compiler flags for udev, overriding pkg-config
> udev_LIBS linker flags for udev, overriding pkg-config
> + systemd_CFLAGS
> + C compiler flags for systemd, overriding pkg-config
> + systemd_LIBS
> + linker flags for systemd, overriding pkg-config
>
> Use these variables to override the choices made by `configure' or to help
> it to find libraries and programs with nonstandard names/locations.
> @@ -13803,6 +13820,7 @@ else
> fi
>
> fi
> +
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we can link with -static" >&5
> $as_echo_n "checking whether we can link with -static... " >&6; }
> if ${ac_cv_e2fsprogs_use_static+:} false; then :
> @@ -14009,6 +14027,165 @@ fi
>
>
>
> +
> +# Check whether --with-crond_dir was given.
> +if test "${with_crond_dir+set}" = set; then :
> + withval=$with_crond_dir;
> +else
> + with_crond_dir=yes
> +fi
> +
> +if test "x${with_crond_dir}" != "xno"; then :
> +
> + if test "x${with_crond_dir}" = "xyes"; then :
> +
> + if test -d "/etc/cron.d"; then :
> + with_crond_dir="/etc/cron.d"
> +fi
> +
> +fi
> + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for system crontab dir" >&5
> +$as_echo_n "checking for system crontab dir... " >&6; }
> + crond_dir="${with_crond_dir}"
> + if test -n "${crond_dir}"; then :
> +
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${crond_dir}" >&5
> +$as_echo "${crond_dir}" >&6; }
> + have_crond="yes"
> +
> +else
> +
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> + have_crond="no"
> +
> +fi
> +
> +else
> +
> + have_crond="disabled"
> +
> +fi
> +
> +
> +
> +
> +# Check whether --with-systemd_unit_dir was given.
> +if test "${with_systemd_unit_dir+set}" = set; then :
> + withval=$with_systemd_unit_dir;
> +else
> + with_systemd_unit_dir=yes
> +fi
> +
> +if test "x${with_systemd_unit_dir}" != "xno"; then :
> +
> + if test "x${with_systemd_unit_dir}" = "xyes"; then :
> +
> +
> +pkg_failed=no
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for systemd" >&5
> +$as_echo_n "checking for systemd... " >&6; }
> +
> +if test -n "$systemd_CFLAGS"; then
> + pkg_cv_systemd_CFLAGS="$systemd_CFLAGS"
> + elif test -n "$PKG_CONFIG"; then
> + if test -n "$PKG_CONFIG" && \
> + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"systemd\""; } >&5
> + ($PKG_CONFIG --exists --print-errors "systemd") 2>&5
> + ac_status=$?
> + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> + test $ac_status = 0; }; then
> + pkg_cv_systemd_CFLAGS=`$PKG_CONFIG --cflags "systemd" 2>/dev/null`
> + test "x$?" != "x0" && pkg_failed=yes
> +else
> + pkg_failed=yes
> +fi
> + else
> + pkg_failed=untried
> +fi
> +if test -n "$systemd_LIBS"; then
> + pkg_cv_systemd_LIBS="$systemd_LIBS"
> + elif test -n "$PKG_CONFIG"; then
> + if test -n "$PKG_CONFIG" && \
> + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"systemd\""; } >&5
> + ($PKG_CONFIG --exists --print-errors "systemd") 2>&5
> + ac_status=$?
> + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> + test $ac_status = 0; }; then
> + pkg_cv_systemd_LIBS=`$PKG_CONFIG --libs "systemd" 2>/dev/null`
> + test "x$?" != "x0" && pkg_failed=yes
> +else
> + pkg_failed=yes
> +fi
> + else
> + pkg_failed=untried
> +fi
> +
> +
> +
> +if test $pkg_failed = yes; then
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +
> +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
> + _pkg_short_errors_supported=yes
> +else
> + _pkg_short_errors_supported=no
> +fi
> + if test $_pkg_short_errors_supported = yes; then
> + systemd_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "systemd" 2>&1`
> + else
> + systemd_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "systemd" 2>&1`
> + fi
> + # Put the nasty error message in config.log where it belongs
> + echo "$systemd_PKG_ERRORS" >&5
> +
> +
> + with_systemd_unit_dir=""
> +
> +elif test $pkg_failed = untried; then
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +
> + with_systemd_unit_dir=""
> +
> +else
> + systemd_CFLAGS=$pkg_cv_systemd_CFLAGS
> + systemd_LIBS=$pkg_cv_systemd_LIBS
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> +$as_echo "yes" >&6; }
> +
> + with_systemd_unit_dir="$($PKG_CONFIG --variable=systemdsystemunitdir systemd)"
> +
> +fi
> +
> +
> +fi
> + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for systemd system unit dir" >&5
> +$as_echo_n "checking for systemd system unit dir... " >&6; }
> + systemd_system_unit_dir="${with_systemd_unit_dir}"
> + if test -n "${systemd_system_unit_dir}"; then :
> +
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${systemd_system_unit_dir}" >&5
> +$as_echo "${systemd_system_unit_dir}" >&6; }
> + have_systemd="yes"
> +
> +else
> +
> + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> + have_systemd="no"
> +
> +fi
> +
> +else
> +
> + have_systemd="disabled"
> +
> +fi
> +
> +
> +
> test -d lib || mkdir lib
> test -d include || mkdir include
> test -d include/linux || mkdir include/linux
> diff --git a/configure.ac b/configure.ac
> index 6e549c5..5a2c8be 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -1392,7 +1392,8 @@ else
> libdir=$libdir/$withval
> root_libdir=$root_libdir/$withval
> fi
> -)dnl
> +)
> +dnl
> dnl
> dnl See if -static works. This could fail if the linker does not
> dnl support -static, or if required external libraries are not available
> @@ -1514,6 +1515,77 @@ AC_SUBST(have_udev)
> AC_SUBST(pkg_udev_rules_dir)
>
> dnl
> +dnl Where do cron jobs go?
> +dnl
> +AC_ARG_WITH([crond_dir],
> + [AS_HELP_STRING([--with-crond-dir@<:@=DIR@:>@],
> + [Install system crontabs into DIR.])],
> + [],
> + [with_crond_dir=yes])
> +AS_IF([test "x${with_crond_dir}" != "xno"],
> + [
> + AS_IF([test "x${with_crond_dir}" = "xyes"],
> + [
> + AS_IF([test -d "/etc/cron.d"],
> + [with_crond_dir="/etc/cron.d"])
> + ])
> + AC_MSG_CHECKING([for system crontab dir])
> + crond_dir="${with_crond_dir}"
> + AS_IF([test -n "${crond_dir}"],
> + [
> + AC_MSG_RESULT(${crond_dir})
> + have_crond="yes"
> + ],
> + [
> + AC_MSG_RESULT(no)
> + have_crond="no"
> + ])
> + ],
> + [
> + have_crond="disabled"
> + ])
> +AC_SUBST(have_crond)
> +AC_SUBST(crond_dir)
> +
> +dnl
> +dnl Where do systemd services go?
> +dnl
> +AC_ARG_WITH([systemd_unit_dir],
> + [AS_HELP_STRING([--with-systemd-unit-dir@<:@=DIR@:>@],
> + [Install systemd system units into DIR.])],
> + [],
> + [with_systemd_unit_dir=yes])
> +AS_IF([test "x${with_systemd_unit_dir}" != "xno"],
> + [
> + AS_IF([test "x${with_systemd_unit_dir}" = "xyes"],
> + [
> + PKG_CHECK_MODULES([systemd], [systemd],
> + [
> + with_systemd_unit_dir="$($PKG_CONFIG --variable=systemdsystemunitdir systemd)"
> + ], [
> + with_systemd_unit_dir=""
> + ])
> + m4_pattern_allow([^PKG_(MAJOR|MINOR|BUILD|REVISION)$])
> + ])
> + AC_MSG_CHECKING([for systemd system unit dir])
> + systemd_system_unit_dir="${with_systemd_unit_dir}"
> + AS_IF([test -n "${systemd_system_unit_dir}"],
> + [
> + AC_MSG_RESULT(${systemd_system_unit_dir})
> + have_systemd="yes"
> + ],
> + [
> + AC_MSG_RESULT(no)
> + have_systemd="no"
> + ])
> + ],
> + [
> + have_systemd="disabled"
> + ])
> +AC_SUBST(have_systemd)
> +AC_SUBST(systemd_system_unit_dir)
> +
> +dnl
> dnl Make our output files, being sure that we create the some miscellaneous
> dnl directories
> dnl
> diff --git a/debian/e2fsprogs.files b/debian/e2fsprogs.files
> index 78720fe..e0e49ce 100644
> --- a/debian/e2fsprogs.files
> +++ b/debian/e2fsprogs.files
> @@ -1,6 +1,9 @@
> sbin
> usr/bin
> +usr/lib
> usr/sbin
> usr/share/man
> etc
> lib/udev/rules.d
> +lib/systemd/system
> +usr/lib
> diff --git a/debian/e2fsprogs.postinst b/debian/e2fsprogs.postinst
> index 00ac363..e7acb0e 100644
> --- a/debian/e2fsprogs.postinst
> +++ b/debian/e2fsprogs.postinst
> @@ -10,4 +10,23 @@ fi
>
> #DEBHELPER#
>
> +# debhelper doesn't know what timers are...
> +update_svc() {
> + deb-systemd-helper unmask "$1" >/dev/null || true
> +
> + if deb-systemd-helper --quiet was-enabled "$1"; then
> + deb-systemd-helper enable "$1" >/dev/null || true
> + else
> + deb-systemd-helper update-state "$1" >/dev/null || true
> + fi
> +}
> +update_svc e2scrub_all.timer
> +update_svc e2scrub_reap.service
> +
> +# Start our new services
> +if [ -d /run/systemd/system ]; then
> + systemctl --system daemon-reload >/dev/null || true
> + deb-systemd-invoke start e2scrub_all.timer >/dev/null || true
> +fi
> +
> exit 0
> diff --git a/debian/e2fsprogs.postrm b/debian/e2fsprogs.postrm
> new file mode 100644
> index 0000000..32cb642
> --- /dev/null
> +++ b/debian/e2fsprogs.postrm
> @@ -0,0 +1,35 @@
> +#!/bin/sh
> +
> +update_svc() {
> + deb-systemd-helper mask "$1" >/dev/null || true
> +
> + if deb-systemd-helper --quiet was-enabled "$1"; then
> + # Enables the unit on first installation, creates new
> + # symlinks on upgrades if the unit file has changed.
> + deb-systemd-helper disable "$1" >/dev/null || true
> + fi
> +}
> +
> +if [ "$1" != "upgrade" ]; then
> + # Abort on error.
> + set -e
> +
> + if [ -x /usr/sbin/update-initramfs -a \
> + -e /etc/initramfs-tools/initramfs.conf ]; then
> + update-initramfs -u
> + fi
> +
> + #DEBHELPER#
> +
> + # debhelper doesn't know what timers are...
> + update_svc e2scrub_all.timer
> + update_svc e2scrub_reap.service
> +
> + # Start our new services
> + if [ -d /run/systemd/system ]; then
> + deb-systemd-invoke stop e2scrub_all.timer >/dev/null || true
> + fi
> +fi
> +
> +exit 0
> +
> diff --git a/scrub/Makefile.in b/scrub/Makefile.in
> index 1744941..cc2e9ce 100644
> --- a/scrub/Makefile.in
> +++ b/scrub/Makefile.in
> @@ -22,7 +22,23 @@ INSTALL_TGT += install-udev
> UNINSTALL_TGT += uninstall-udev
> endif
>
> -all:: $(PROGS) $(MANPAGES) $(CONFFILES) $(UDEV_RULES)
> +ifeq ($(HAVE_CROND),yes)
> +CRONTABS = e2scrub_all.cron
> +LIBPROGS += e2scrub_reap e2scrub_all_cron
> +INSTALLDIRS_TGT += installdirs-crond installdirs-libprogs
> +INSTALL_TGT += install-crond install-libprogs
> +UNINSTALL_TGT += uninstall-crond uninstall-libprogs
> +endif
> +
> +ifeq ($(HAVE_SYSTEMD),yes)
> +SERVICE_FILES = e2scrub@...rvice e2scrub_all.service e2scrub_all.timer e2scrub_fail@...rvice e2scrub_reap.service
> +LIBPROGS += e2scrub_fail e2scrub_reap
> +INSTALLDIRS_TGT += installdirs-systemd installdirs-libprogs
> +INSTALL_TGT += install-systemd install-libprogs
> +UNINSTALL_TGT += uninstall-systemd uninstall-libprogs
> +endif
> +
> +all:: $(PROGS) $(MANPAGES) $(CONFFILES) $(UDEV_RULES) $(SERVICE_FILES) $(CRONTABS) $(LIBPROGS)
>
> e2scrub: $(DEP_SUBSTITUTE) e2scrub.in
> $(E) " SUBST $@"
> @@ -34,6 +50,21 @@ e2scrub_all: e2scrub_all.in
> $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/e2scrub_all.in $@
> $(Q) chmod a+x $@
>
> +e2scrub_fail: e2scrub_fail.in
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/e2scrub_fail.in $@
> + $(Q) chmod a+x $@
> +
> +e2scrub_reap: e2scrub_reap.in
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/e2scrub_reap.in $@
> + $(Q) chmod a+x $@
> +
> +e2scrub_all_cron: e2scrub_all_cron.in
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/e2scrub_all_cron.in $@
> + $(Q) chmod a+x $@
> +
> %.8: %.8.in $(DEP_SUBSTITUTE)
> $(E) " SUBST $@"
> $(Q) $(SUBSTITUTE_UPTIME) $< $@
> @@ -46,10 +77,34 @@ e2scrub_all: e2scrub_all.in
> $(E) " SUBST $@"
> $(Q) $(SUBSTITUTE_UPTIME) $< $@
>
> +%.service: %.service.in $(DEP_SUBSTITUTE)
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $< $@
> +
> +%.cron: %.cron.in $(DEP_SUBSTITUTE)
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $< $@
> +
> +%.timer: %.timer.in $(DEP_SUBSTITUTE)
> + $(E) " SUBST $@"
> + $(Q) $(SUBSTITUTE_UPTIME) $< $@
> +
> installdirs-udev:
> $(E) " MKINSTALLDIRS $(UDEV_RULES_DIR)"
> $(Q) $(MKINSTALLDIRS) $(DESTDIR)$(UDEV_RULES_DIR)
>
> +installdirs-crond:
> + $(E) " MKINSTALLDIRS $(CROND_DIR)"
> + $(Q) $(MKINSTALLDIRS) $(DESTDIR)$(CROND_DIR)
> +
> +installdirs-libprogs:
> + $(E) " MKINSTALLDIRS $(pkglibdir)"
> + $(Q) $(MKINSTALLDIRS) $(DESTDIR)$(pkglibdir)
> +
> +installdirs-systemd:
> + $(E) " MKINSTALLDIRS $(SYSTEMD_SYSTEM_UNIT_DIR)"
> + $(Q) $(MKINSTALLDIRS) $(DESTDIR)$(SYSTEMD_SYSTEM_UNIT_DIR)
> +
> installdirs: $(INSTALLDIRS_TGT)
> $(E) " MKINSTALLDIRS $(root_sbindir) $(man8dir) $(root_sysconfdir)"
> $(Q) $(MKINSTALLDIRS) $(DESTDIR)$(root_sbindir) \
> @@ -61,6 +116,24 @@ install-udev:
> $(INSTALL_PROGRAM) $$i $(DESTDIR)$(UDEV_RULES_DIR)/96-$$i; \
> done
>
> +install-crond:
> + $(Q) for i in $(CRONTABS); do \
> + $(ES) " INSTALL $(CROND_DIR)/$$i"; \
> + $(INSTALL_PROGRAM) $$i $(DESTDIR)$(CROND_DIR)/$$i; \
> + done
> +
> +install-libprogs: $(LIBPROGS)
> + $(Q) for i in $(LIBPROGS); do \
> + $(ES) " INSTALL $(pkglibdir)/$$i"; \
> + $(INSTALL_PROGRAM) $$i $(DESTDIR)$(pkglibdir)/$$i; \
> + done
> +
> +install-systemd: $(SERVICE_FILES)
> + $(Q) for i in $(SERVICE_FILES); do \
> + $(ES) " INSTALL_DATA $(SYSTEMD_SYSTEM_UNIT_DIR)/$$i"; \
> + $(INSTALL_DATA) $$i $(DESTDIR)$(SYSTEMD_SYSTEM_UNIT_DIR)/$$i; \
> + done
> +
> install: $(PROGS) $(MANPAGES) $(FMANPAGES) installdirs $(INSTALL_TGT)
> $(Q) for i in $(PROGS); do \
> $(ES) " INSTALL $(root_sbindir)/$$i"; \
> @@ -83,6 +156,21 @@ uninstall-udev:
> $(RM) -f $(DESTDIR)$(UDEV_RULES_DIR)/96-$$i; \
> done
>
> +uninstall-crond:
> + for i in $(CRONTABS); do \
> + $(RM) -f $(DESTDIR)$(CROND_DIR)/$$i; \
> + done
> +
> +uninstall-libprogs:
> + for i in $(LIBPROGS); do \
> + $(RM) -f $(DESTDIR)$(pkglibdir)/$$i; \
> + done
> +
> +uninstall-systemd:
> + for i in $(SERVICE_FILES); do \
> + $(RM) -f $(DESTDIR)$(SYSTEMD_SYSTEM_UNIT_DIR)/$$i; \
> + done
> +
> uninstall: $(UNINSTALL_TGT)
> for i in $(PROGS); do \
> $(RM) -f $(DESTDIR)$(root_sbindir)/$$i; \
> diff --git a/scrub/e2scrub.in b/scrub/e2scrub.in
> index f77ec6f..a19b6bb 100644
> --- a/scrub/e2scrub.in
> +++ b/scrub/e2scrub.in
> @@ -44,12 +44,34 @@ print_version() {
> echo "e2scrub @E2FSPROGS_VERSION@ (@E2FSPROGS_DATE@)"
> }
>
> +exitcode() {
> + ret="$1"
> +
> + # If we're being run as a service, the return code must fit the LSB
> + # init script action error guidelines, which is to say that we
> + # compress all errors to 1 ("generic or unspecified error", LSB 5.0
> + # section 22.2) and hope the admin will scan the log for what
> + # actually happened.
> +
> + # We have to sleep 2 seconds here because journald uses the pid to
> + # connect our log messages to the systemd service. This is critical
> + # for capturing all the log messages if the scrub fails, because the
> + # fail service uses the service name to gather log messages for the
> + # error report.
> + if [ -n "${SERVICE_MODE}" ]; then
> + test "${ret}" -ne 0 && ret=1
> + sleep 2
> + fi
> +
> + exit "${ret}"
> +}
> +
> while getopts "rtV" opt; do
> case "${opt}" in
> "r") reap=1;;
> "t") fstrim=1;;
> - "V") print_version; exit 0;;
> - *) print_help; exit 2;;
> + "V") print_version; exitcode 0;;
> + *) print_help; exitcode 2;;
> esac
> done
> shift "$((OPTIND - 1))"
> @@ -57,18 +79,18 @@ shift "$((OPTIND - 1))"
> dev="$1"
> if [ -z "${dev}" ]; then
> print_help
> - exit 1
> + exitcode 1
> elif [ ! -b "${dev}" ]; then
> echo "${dev}: Not a block device?"
> print_help
> - exit 16
> + exitcode 16
> fi
>
> # Make sure this is an LVM device we can snapshot
> eval $(lvs --nameprefixes -o name,vgname --noheadings "${dev}")
> if [ -z "${LVM2_VG_NAME}" ] || [ -z "${LVM2_LV_NAME}" ]; then
> echo "${dev}: Not a LVM device."
> - exit 16
> + exitcode 16
> fi
> start_time="$(date +'%Y%m%d%H%M%S')"
> snap="${LVM2_LV_NAME}.e2scrub"
> @@ -80,7 +102,7 @@ ext[234])
> ;;
> *)
> echo "${dev}: Filesystem of type ${fstype} not supported."
> - exit 16
> + exitcode 16
> ;;
> esac
>
> @@ -128,7 +150,7 @@ if [ "${reap}" -gt 0 ]; then
> fi
> if ! setup; then
> echo "Snapshot of ${dev} FAILED, will not check!"
> - exit 1
> + exitcode 1
> fi
>
> # Check and react
> @@ -167,4 +189,4 @@ else
> fi
> fi
>
> -exit "${ret}"
> +exitcode "${ret}"
> diff --git a/scrub/e2scrub@...rvice.in b/scrub/e2scrub@...rvice.in
> new file mode 100644
> index 0000000..496f894
> --- /dev/null
> +++ b/scrub/e2scrub@...rvice.in
> @@ -0,0 +1,20 @@
> +[Unit]
> +Description=Online ext4 Metadata Check for %I
> +OnFailure=e2scrub_fail@...service
> +Documentation=man:e2scrub(8)
> +
> +[Service]
> +Type=oneshot
> +WorkingDirectory=/
> +PrivateNetwork=true
> +ProtectSystem=true
> +ProtectHome=read-only
> +PrivateTmp=yes
> +AmbientCapabilities=CAP_SYS_ADMIN CAP_SYS_RAWIO
> +NoNewPrivileges=yes
> +User=root
> +IOSchedulingClass=idle
> +CPUSchedulingPolicy=idle
> +Environment=SERVICE_MODE=1
> +ExecStart=@...t_sbindir@...scrub -t %I
> +SyslogIdentifier=%N
> diff --git a/scrub/e2scrub_all.cron.in b/scrub/e2scrub_all.cron.in
> new file mode 100644
> index 0000000..0cb5f1f
> --- /dev/null
> +++ b/scrub/e2scrub_all.cron.in
> @@ -0,0 +1,2 @@
> +30 3 * * 0 root test -e /run/systemd/system || @pkglibdir@...scrub_all_cron
> +10 3 * * * root test -e /run/systemd/system || @pkglibdir@...scrub_reap
> diff --git a/scrub/e2scrub_all.in b/scrub/e2scrub_all.in
> index 453981b..fbf2e95 100644
> --- a/scrub/e2scrub_all.in
> +++ b/scrub/e2scrub_all.in
> @@ -30,10 +30,32 @@ print_version() {
> echo "e2scrub_all @E2FSPROGS_VERSION@ (@E2FSPROGS_DATE@)"
> }
>
> +exitcode() {
> + ret="$1"
> +
> + # If we're being run as a service, the return code must fit the LSB
> + # init script action error guidelines, which is to say that we
> + # compress all errors to 1 ("generic or unspecified error", LSB 5.0
> + # section 22.2) and hope the admin will scan the log for what
> + # actually happened.
> +
> + # We have to sleep 2 seconds here because journald uses the pid to
> + # connect our log messages to the systemd service. This is critical
> + # for capturing all the log messages if the scrub fails, because the
> + # fail service uses the service name to gather log messages for the
> + # error report.
> + if [ -n "${SERVICE_MODE}" ]; then
> + test "${ret}" -ne 0 && ret=1
> + sleep 2
> + fi
> +
> + exit "${ret}"
> +}
> +
> while getopts "V" opt; do
> case "${opt}" in
> - "V") print_version; exit 0;;
> - *) print_help; exit 2;;
> + "V") print_version; exitcode 0;;
> + *) print_help; exitcode 2;;
> esac
> done
> shift "$((OPTIND - 1))"
> @@ -49,7 +71,15 @@ lvs -o vg_name,lv_name,lv_role --noheadings 2> /dev/null | while read vg lv role
> # Skip non-ext[234]
> blkid -p -n "${types}" "${dev}" > /dev/null 2>&1 || continue
>
> - ${DBG} "@root_sbindir@...scrub" "${dev}"
> + if type systemctl > /dev/null 2>&1; then
> + ${DBG} systemctl start "e2scrub@...ev}" 2> /dev/null
> + res=$?
> + if [ "${res}" -ne 0 ] && [ "${res}" -ne 1 ]; then
> + ${DBG} "@root_sbindir@...scrub" "${dev}"
> + fi
> + else
> + ${DBG} "@root_sbindir@...scrub" "${dev}"
> + fi
> done
>
> -exit 0
> +exitcode 0
> diff --git a/scrub/e2scrub_all.service.in b/scrub/e2scrub_all.service.in
> new file mode 100644
> index 0000000..bc05184
> --- /dev/null
> +++ b/scrub/e2scrub_all.service.in
> @@ -0,0 +1,10 @@
> +[Unit]
> +Description=Online ext4 Metadata Check for All Filesystems
> +ConditionACPower=true
> +Documentation=man:e2scrub_all(8)
> +
> +[Service]
> +Type=oneshot
> +Environment=SERVICE_MODE=1
> +ExecStart=@...t_sbindir@...scrub_all
> +SyslogIdentifier=e2scrub_all
> diff --git a/scrub/e2scrub_all.timer.in b/scrub/e2scrub_all.timer.in
> new file mode 100644
> index 0000000..3d558bb
> --- /dev/null
> +++ b/scrub/e2scrub_all.timer.in
> @@ -0,0 +1,11 @@
> +[Unit]
> +Description=Periodic ext4 Online Metadata Check for All Filesystems
> +
> +[Timer]
> +# Run on Sunday at 3:10am, to avoid running afoul of DST changes
> +OnCalendar=Sun *-*-* 03:10:00
> +RandomizedDelaySec=60
> +Persistent=true
> +
> +[Install]
> +WantedBy=timers.target
> diff --git a/scrub/e2scrub_all_cron.in b/scrub/e2scrub_all_cron.in
> new file mode 100644
> index 0000000..f9cff87
> --- /dev/null
> +++ b/scrub/e2scrub_all_cron.in
> @@ -0,0 +1,68 @@
> +#!/bin/bash
> +
> +# Copyright (C) 2018 Oracle. All Rights Reserved.
> +#
> +# Author: Darrick J. Wong <darrick.wong@...cle.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License
> +# as published by the Free Software Foundation; either version 2
> +# of the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
> +
> +# Run e2scrub_all from a cronjob if we don't have systemd and we're not
> +# running on AC power.
> +
> +on_ac_power() {
> + local any_known=no
> +
> + # try sysfs power class first
> + if [ -d /sys/class/power_supply ]; then
> + for psu in /sys/class/power_supply/*; do
> + if [ -r "$psu/type" ]; then
> + type=$(cat "$psu/type")
> +
> + # ignore batteries
> + [ "$type" = "Battery" ] && continue
> +
> + online=$(cat "$psu/online")
> +
> + [ "$online" = 1 ] && return 0
> + [ "$online" = 0 ] && any_known=yes
> + fi
> + done
> +
> + [ "$any_known" = "yes" ] && return 1
> + fi
> +
> + # else fall back to AC adapters in /proc
> + if [ -d /proc/acpi/ac_adapter ]; then
> + for ac in /proc/acpi/ac_adapter/*; do
> + if [ -r "$ac/state" ]; then
> + grep -q on-line "$ac/state" && return 0
> + grep -q off-line "$ac/state" && any_known=yes
> + elif [ -r "$ac/status" ]; then
> + grep -q on-line "$ac/status" && return 0
> + grep -q off-line "$ac/status" && any_known=yes
> + fi
> + done
> +
> + [ "$any_known" = "yes" ] && return 1
> + fi
> +
> + # Can't tell, just assume we're on AC.
> + return 0
> +}
> +
> +test -e /run/systemd/system && exit 0
> +on_ac_power || exit 0
> +
> +exec @root_sbindir@...scrub_all
> diff --git a/scrub/e2scrub_fail.in b/scrub/e2scrub_fail.in
> new file mode 100644
> index 0000000..f27197a
> --- /dev/null
> +++ b/scrub/e2scrub_fail.in
> @@ -0,0 +1,25 @@
> +#!/bin/bash
> +
> +# Email logs of failed e2scrub unit runs when the systemd service fails.
> +
> +recipient="$1"
> +test -z "${recipient}" && exit 0
> +device="$2"
> +test -z "${device}" && exit 0
> +hostname="$(hostname -f 2>/dev/null)"
> +test -z "${hostname}" && hostname="${HOSTNAME}"
> +if ! type sendmail > /dev/null 2>&1; then
> + echo "$0: sendmail program not found."
> + exit 1
> +fi
> +
> +(cat << ENDL
> +To: $1
> +From: <e2scrub@...ostname}>
> +Subject: e2scrub failure on ${device}
> +
> +So sorry, the automatic e2scrub of ${device} on ${hostname} failed.
> +
> +A log of what happened follows:
> +ENDL
> +systemctl status --full --lines 4294967295 "e2scrub@...evice}") | sendmail -t -i
> diff --git a/scrub/e2scrub_fail@...rvice.in b/scrub/e2scrub_fail@...rvice.in
> new file mode 100644
> index 0000000..df87949
> --- /dev/null
> +++ b/scrub/e2scrub_fail@...rvice.in
> @@ -0,0 +1,10 @@
> +[Unit]
> +Description=Online ext4 Metadata Check Failure Reporting for %I
> +
> +[Service]
> +Type=oneshot
> +Environment=EMAIL_ADDR=root
> +ExecStart=@...libdir@...scrub_fail "${EMAIL_ADDR}" %I
> +User=mail
> +Group=mail
> +SupplementaryGroups=systemd-journal
> diff --git a/scrub/e2scrub_reap.in b/scrub/e2scrub_reap.in
> new file mode 100644
> index 0000000..0fde0e6
> --- /dev/null
> +++ b/scrub/e2scrub_reap.in
> @@ -0,0 +1,48 @@
> +#!/bin/bash
> +
> +# Copyright (C) 2018 Oracle. All Rights Reserved.
> +#
> +# Author: Darrick J. Wong <darrick.wong@...cle.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License
> +# as published by the Free Software Foundation; either version 2
> +# of the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
> +
> +# Clean up leftover e2scrub snapshots
> +
> +# Find any ${lvname}.e2scrub snapshot and delete it
> +lvs -o vg_name,lv_name,lv_role --noheadings 2> /dev/null | while read vg lv role extra; do
> + # Parse error?
> + test -n "${extra}" || continue
> + # Is this really a snapshot?
> + echo "${role}" | grep -q "snapshot" || continue
> + # An e2scrub snapshot?
> + echo "${lv}" | grep -q ".e2scrub$" || continue
> +
> + # Check that the e2scrub snap still exists after waiting a brief period.
> + # This is how try to avoid deleting a snap from underneath a running
> + # scrub.
> + dev="/dev/${vg}/${lv}"
> + test -e "${dev}" || continue
> + sleep 2
> + test -e "${dev}" || continue
> +
> + # Remove and wait for removal to succeed.
> + lvremove -f "${vg}/${lv}" 3>&-
> + while [ -e "${dev}" ] && [ "$?" -eq "5" ]; do
> + sleep 0.5
> + lvremove -f "${vg}/${lv}" 3>&-
> + done
> +done
> +
> +exitcode 0
> diff --git a/scrub/e2scrub_reap.service.in b/scrub/e2scrub_reap.service.in
> new file mode 100644
> index 0000000..38eefc4
> --- /dev/null
> +++ b/scrub/e2scrub_reap.service.in
> @@ -0,0 +1,21 @@
> +[Unit]
> +Description=Remove Stale Online ext4 Metadata Check Snapshots
> +
> +[Service]
> +Type=oneshot
> +WorkingDirectory=/
> +PrivateNetwork=true
> +ProtectSystem=true
> +ProtectHome=read-only
> +PrivateTmp=yes
> +AmbientCapabilities=CAP_SYS_ADMIN CAP_SYS_RAWIO
> +NoNewPrivileges=yes
> +User=root
> +IOSchedulingClass=idle
> +CPUSchedulingPolicy=idle
> +ExecStart=@...libdir@...scrub_reap
I thought that the idea was to use e2scrub -r and get rid of the
e2scrub_reap.
-Lukas
> +SyslogIdentifier=%N
> +RemainAfterExit=no
> +
> +[Install]
> +WantedBy=default.target
> diff --git a/util/subst.conf.in b/util/subst.conf.in
> index 6bf658d..0da4554 100644
> --- a/util/subst.conf.in
> +++ b/util/subst.conf.in
> @@ -21,3 +21,6 @@ JDEV
> TDB_MAN_COMMENT @TDB_MAN_COMMENT@
> root_sbindir @root_sbindir@
> root_bindir @root_bindir@
> +libdir @libdir@
> +$exec_prefix @exec_prefix@
> +pkglibdir @libdir@...fsprogs
>
Powered by blists - more mailing lists