| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1663006162.20832248.1554910680080.JavaMail.zimbra@redhat.com>
Date: Wed, 10 Apr 2019 11:38:00 -0400 (EDT)
From: Pankaj Gupta <pagupta@...hat.com>
To: Cornelia Huck <cohuck@...hat.com>
Cc: linux-nvdimm@...ts.01.org, linux-kernel@...r.kernel.org,
virtualization@...ts.linux-foundation.org, kvm@...r.kernel.org,
linux-fsdevel@...r.kernel.org, linux-acpi@...r.kernel.org,
qemu-devel@...gnu.org, linux-ext4@...r.kernel.org,
linux-xfs@...r.kernel.org,
dan j williams <dan.j.williams@...el.com>,
zwisler@...nel.org, vishal l verma <vishal.l.verma@...el.com>,
dave jiang <dave.jiang@...el.com>, mst@...hat.com,
jasowang@...hat.com, willy@...radead.org, rjw@...ysocki.net,
hch@...radead.org, lenb@...nel.org, jack@...e.cz, tytso@....edu,
adilger kernel <adilger.kernel@...ger.ca>,
darrick wong <darrick.wong@...cle.com>, lcapitulino@...hat.com,
kwolf@...hat.com, imammedo@...hat.com, jmoyer@...hat.com,
nilal@...hat.com, riel@...riel.com, stefanha@...hat.com,
aarcange@...hat.com, david@...hat.com, david@...morbit.com,
xiaoguangrong eric <xiaoguangrong.eric@...il.com>,
pbonzini@...hat.com, kilobyte@...band.pl,
yuval shaia <yuval.shaia@...cle.com>
Subject: Re: [PATCH v5 2/5] virtio-pmem: Add virtio pmem driver
>
> > This patch adds virtio-pmem driver for KVM guest.
> >
> > Guest reads the persistent memory range information from
> > Qemu over VIRTIO and registers it on nvdimm_bus. It also
> > creates a nd_region object with the persistent memory
> > range information so that existing 'nvdimm/pmem' driver
> > can reserve this into system memory map. This way
> > 'virtio-pmem' driver uses existing functionality of pmem
> > driver to register persistent memory compatible for DAX
> > capable filesystems.
> >
> > This also provides function to perform guest flush over
> > VIRTIO from 'pmem' driver when userspace performs flush
> > on DAX memory range.
> >
> > Signed-off-by: Pankaj Gupta <pagupta@...hat.com>
> > ---
> > drivers/nvdimm/virtio_pmem.c | 88 ++++++++++++++++++++++
> > drivers/virtio/Kconfig | 10 +++
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/pmem.c | 124 +++++++++++++++++++++++++++++++
> > include/linux/virtio_pmem.h | 60 +++++++++++++++
> > include/uapi/linux/virtio_ids.h | 1 +
> > include/uapi/linux/virtio_pmem.h | 10 +++
> > 7 files changed, 294 insertions(+)
> > create mode 100644 drivers/nvdimm/virtio_pmem.c
> > create mode 100644 drivers/virtio/pmem.c
> > create mode 100644 include/linux/virtio_pmem.h
> > create mode 100644 include/uapi/linux/virtio_pmem.h
> >
> (...)
> > diff --git a/drivers/virtio/pmem.c b/drivers/virtio/pmem.c
> > new file mode 100644
> > index 000000000000..cc9de9589d56
> > --- /dev/null
> > +++ b/drivers/virtio/pmem.c
> > @@ -0,0 +1,124 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and registers the virtual pmem device
> > + * with libnvdimm core.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include <../../drivers/nvdimm/nd.h>
> > +
> > +static struct virtio_device_id id_table[] = {
> > + { VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > + { 0 },
> > +};
> > +
> > + /* Initialize virt queue */
> > +static int init_vq(struct virtio_pmem *vpmem)
>
> IMHO, you don't gain much by splitting off this function...
o.k. I kept this for better code structure.
>
> > +{
> > + struct virtqueue *vq;
> > +
> > + /* single vq */
> > + vpmem->req_vq = vq = virtio_find_single_vq(vpmem->vdev,
> > + host_ack, "flush_queue");
> > + if (IS_ERR(vq))
> > + return PTR_ERR(vq);
>
> I'm personally not a fan of chained assignments... I think I'd just
> drop the 'vq' variable and operate on vpmem->req_vq directly.
Sure.
>
> > +
> > + spin_lock_init(&vpmem->pmem_lock);
> > + INIT_LIST_HEAD(&vpmem->req_list);
> > +
> > + return 0;
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > + int err = 0;
> > + struct resource res;
> > + struct virtio_pmem *vpmem;
> > + struct nvdimm_bus *nvdimm_bus;
> > + struct nd_region_desc ndr_desc = {};
> > + int nid = dev_to_node(&vdev->dev);
> > + struct nd_region *nd_region;
> > +
> > + if (!vdev->config->get) {
> > + dev_err(&vdev->dev, "%s failure: config disabled\n",
>
> Maybe s/config disabled/config access disabled/ ? That seems to be the
> more common message.
This is better.
>
> > + __func__);
> > + return -EINVAL;
> > + }
> > +
> > + vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> > + GFP_KERNEL);
>
> Here, the vpmem variable makes sense for convenience, but I'm again not
> a fan of the chaining :)
Sure will change :)
>
> > + if (!vpmem) {
> > + err = -ENOMEM;
> > + goto out_err;
> > + }
> > +
> > + vpmem->vdev = vdev;
> > + err = init_vq(vpmem);
> > + if (err)
> > + goto out_err;
> > +
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + start, &vpmem->start);
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + size, &vpmem->size);
> > +
> > + res.start = vpmem->start;
> > + res.end = vpmem->start + vpmem->size-1;
> > + vpmem->nd_desc.provider_name = "virtio-pmem";
> > + vpmem->nd_desc.module = THIS_MODULE;
> > +
> > + vpmem->nvdimm_bus = nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > + &vpmem->nd_desc);
>
> And here :)
Sure.
>
> > + if (!nvdimm_bus)
> > + goto out_vq;
> > +
> > + dev_set_drvdata(&vdev->dev, nvdimm_bus);
> > +
> > + ndr_desc.res = &res;
> > + ndr_desc.numa_node = nid;
> > + ndr_desc.flush = virtio_pmem_flush;
> > + set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > + set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
> > + nd_region = nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc);
> > + nd_region->provider_data = dev_to_virtio
> > + (nd_region->dev.parent->parent);
>
> Isn't it clear that this parent chain will always end up at &vdev->dev?
Yes, It will resolve to &vdev->dev.
> Maybe simply set ->provider_data to vdev directly? (Does it need to
> grab a reference count of the device, BTW?)
reference is already taken when registering the device with nvdimm_bus.
>
> > +
> > + if (!nd_region)
> > + goto out_nd;
>
> Probably better to do this check before you access nd_region's
> members :)
ah Sorry! Will correct this.
>
> > +
> > + return 0;
> > +out_nd:
> > + err = -ENXIO;
> > + nvdimm_bus_unregister(nvdimm_bus);
> > +out_vq:
> > + vdev->config->del_vqs(vdev);
> > +out_err:
> > + dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> > + return err;
> > +}
> > +
> > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > +{
> > + struct virtio_pmem *vpmem = vdev->priv;
> > + struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > +
> > + nvdimm_bus_unregister(nvdimm_bus);
>
> I haven't followed this around the nvdimm code, but is the nd_region
> you created during probe cleaned up automatically, or would you need to
> do something here?
'nvdimm_bus_unregister' does that.
>
> > + vdev->config->del_vqs(vdev);
> > + vdev->config->reset(vdev);
> > + kfree(vpmem);
>
> You allocated vpmem via devm_kzalloc; isn't it freed automatically on
> remove?
yes. Will remove free(vpmem).
>
> > +}
> > +
> > +static struct virtio_driver virtio_pmem_driver = {
> > + .driver.name = KBUILD_MODNAME,
> > + .driver.owner = THIS_MODULE,
> > + .id_table = id_table,
> > + .probe = virtio_pmem_probe,
> > + .remove = virtio_pmem_remove,
> > +};
> > +
> > +module_virtio_driver(virtio_pmem_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +MODULE_DESCRIPTION("Virtio pmem driver");
> > +MODULE_LICENSE("GPL");
>
> Only looked at this from the general virtio driver angle; seems fine
> apart from some easy-to-fix issues and some personal style preference
> things.
Thank you for the review.
Best regards,
Pankaj
>
Powered by blists - more mailing lists