lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191009062242.87D244204B@d06av24.portsmouth.uk.ibm.com>
Date:   Wed, 9 Oct 2019 11:52:41 +0530
From:   Ritesh Harjani <riteshh@...ux.ibm.com>
To:     Matthew Bobrowski <mbobrowski@...browski.org>, tytso@....edu,
        jack@...e.cz, adilger.kernel@...ger.ca
Cc:     linux-ext4@...r.kernel.org, linux-fsdevel@...r.kernel.org,
        hch@...radead.org, david@...morbit.com, darrick.wong@...cle.com
Subject: Re: [PATCH v4 2/8] ext4: move out IOMAP_WRITE path into separate
 helper



On 10/3/19 5:03 PM, Matthew Bobrowski wrote:
> In preparation for porting across the direct I/O path to iomap, split
> out the IOMAP_WRITE logic into a separate helper. This way, we don't
> need to clutter the ext4_iomap_begin() callback.
> 
> Signed-off-by: Matthew Bobrowski <mbobrowski@...browski.org>

Minor comment, but otherwise.
Patch looks good to me. You may add:

Reviewed-by: Ritesh Harjani <riteshh@...ux.ibm.com>


> ---
>   fs/ext4/inode.c | 110 ++++++++++++++++++++++++++----------------------
>   1 file changed, 60 insertions(+), 50 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 1ccdc14c4d69..caeb3dec0dec 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3439,6 +3439,62 @@ static int ext4_set_iomap(struct inode *inode, struct iomap *iomap, u16 type,
>   	return 0;
>   }
> 
> +static int ext4_iomap_alloc(struct inode *inode,
> +			    unsigned flags,
> +			    unsigned long first_block,
> +			    struct ext4_map_blocks *map)
> +{
> +	handle_t *handle;
> +	u8 blkbits = inode->i_blkbits;
> +	int ret, dio_credits, retries = 0;
> +
> +	/*
> +	 * Trim mapping request to the maximum value that we can map
> +	 * at once for direct I/O.
> +	 */
> +	if (map->m_len > DIO_MAX_BLOCKS)
> +		map->m_len = DIO_MAX_BLOCKS;
> +	dio_credits = ext4_chunk_trans_blocks(inode, map->m_len);
> +retry:
> +	/*
> +	 * Either we allocate blocks and then we don't get unwritten
> +	 * extent so we have reserved enough credits, or the blocks
> +	 * are already allocated and unwritten. In that case, the
> +	 * extent conversion fits in the credits as well.
> +	 */
> +	handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS, dio_credits);
> +	if (IS_ERR(handle))
> +		return PTR_ERR(handle);
> +
> +	ret = ext4_map_blocks(handle, inode, map, EXT4_GET_BLOCKS_CREATE_ZERO);
> +	if (ret < 0)
> +		goto journal_stop;
> +
> +	/*
> +	 * If we have allocated blocks beyond the EOF, we need to make
> +	 * sure that they get truncate if we crash before updating the
> +	 * inode size metadata in ext4_iomap_end(). For faults, we
> +	 * don't need to do that (and cannot due to the orphan list
> +	 * operations needing an inode_lock()). If we happen to
> +	 * instantiate blocks beyond EOF, it is because we race with a
> +	 * truncate operation, which already has added the inode onto
> +	 * the orphan list.
> +	 */
> +	if (!(flags & IOMAP_FAULT) && first_block + map->m_len >
> +	    (i_size_read(inode) + (1 << blkbits) - 1) >> blkbits) {
> +		int err;
> +
> +		err = ext4_orphan_add(handle, inode);
> +		if (err < 0)
> +			ret = err;
> +	}
> +journal_stop:
> +	ext4_journal_stop(handle);
> +	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
> +		goto retry;
> +	return ret;
> +}
> +
>   static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
>   			    unsigned flags, struct iomap *iomap)
>   {
> @@ -3500,62 +3556,16 @@ static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
>   			}
>   		}
>   	} else if (flags & IOMAP_WRITE) {
> -		int dio_credits;
> -		handle_t *handle;
> -		int retries = 0;
> -
> -		/* Trim mapping request to maximum we can map at once for DIO */
> -		if (map.m_len > DIO_MAX_BLOCKS)
> -			map.m_len = DIO_MAX_BLOCKS;
> -		dio_credits = ext4_chunk_trans_blocks(inode, map.m_len);
> -retry:
> -		/*
> -		 * Either we allocate blocks and then we don't get unwritten
> -		 * extent so we have reserved enough credits, or the blocks
> -		 * are already allocated and unwritten and in that case
> -		 * extent conversion fits in the credits as well.
> -		 */
> -		handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS,
> -					    dio_credits);
> -		if (IS_ERR(handle))
> -			return PTR_ERR(handle);
> -
> -		ret = ext4_map_blocks(handle, inode, &map,
> -				      EXT4_GET_BLOCKS_CREATE_ZERO);
> -		if (ret < 0) {
> -			ext4_journal_stop(handle);
> -			if (ret == -ENOSPC &&
> -			    ext4_should_retry_alloc(inode->i_sb, &retries))
> -				goto retry;
> -			return ret;
> -		}
> -
> -		/*
> -		 * If we added blocks beyond i_size, we need to make sure they
> -		 * will get truncated if we crash before updating i_size in
> -		 * ext4_iomap_end(). For faults we don't need to do that (and
> -		 * even cannot because for orphan list operations inode_lock is
> -		 * required) - if we happen to instantiate block beyond i_size,
> -		 * it is because we race with truncate which has already added
> -		 * the inode to the orphan list.
> -		 */
> -		if (!(flags & IOMAP_FAULT) && first_block + map.m_len >
> -		    (i_size_read(inode) + (1 << blkbits) - 1) >> blkbits) {
> -			int err;
> -
> -			err = ext4_orphan_add(handle, inode);
> -			if (err < 0) {
> -				ext4_journal_stop(handle);
> -				return err;
> -			}
> -		}
> -		ext4_journal_stop(handle);
> +		ret = ext4_iomap_alloc(inode, flags, first_block, &map);

We don't need "first_block" argument here. Since
map->m_lblk saves first_block directly above in the same function.

No strong objection against ext4_iomap_alloc, but
maybe ext4_iomap_map_write sounds better?
Either way is fine though.


>   	} else {
>   		ret = ext4_map_blocks(NULL, inode, &map, 0);
>   		if (ret < 0)
>   			return ret;
>   	}
> 
> +	if (ret < 0)
> +		return ret;
> +
>   	if (!ret)
>   		type = delalloc ? IOMAP_DELALLOC : IOMAP_HOLE;
>   	return ext4_set_iomap(inode, iomap, type, first_block, &map);
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ