[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200221115050.238976-7-satyat@google.com>
Date: Fri, 21 Feb 2020 03:50:47 -0800
From: Satya Tangirala <satyat@...gle.com>
To: linux-block@...r.kernel.org, linux-scsi@...r.kernel.org,
linux-fscrypt@...r.kernel.org, linux-fsdevel@...r.kernel.org,
linux-f2fs-devel@...ts.sourceforge.net, linux-ext4@...r.kernel.org
Cc: Barani Muthukumaran <bmuthuku@....qualcomm.com>,
Kuohong Wang <kuohong.wang@...iatek.com>,
Kim Boojin <boojin.kim@...sung.com>,
Satya Tangirala <satyat@...gle.com>
Subject: [PATCH v7 6/9] scsi: ufs: Add inline encryption support to UFS
Wire up ufshcd.c with the UFS Crypto API, the block layer inline
encryption additions and the keyslot manager.
Also, introduce UFSHCD_QUIRK_BROKEN_CRYPTO that certain UFS drivers
that don't yet support inline encryption need to use - taken from
patches by John Stultz <john.stultz@...aro.org>
(https://android-review.googlesource.com/c/kernel/common/+/1162224/5)
(https://android-review.googlesource.com/c/kernel/common/+/1162225/5)
(https://android-review.googlesource.com/c/kernel/common/+/1164506/1)
Signed-off-by: Satya Tangirala <satyat@...gle.com>
---
drivers/scsi/ufs/ufs-hisi.c | 8 +++++
drivers/scsi/ufs/ufs-qcom.c | 7 ++++
drivers/scsi/ufs/ufshcd-crypto.c | 26 ++++++++++++++
drivers/scsi/ufs/ufshcd-crypto.h | 14 ++++++++
drivers/scsi/ufs/ufshcd.c | 59 +++++++++++++++++++++++++++++---
drivers/scsi/ufs/ufshcd.h | 8 +++++
6 files changed, 117 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 5d6487350a6c..fa9d4d1c43c9 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -475,6 +475,14 @@ static int ufs_hisi_init_common(struct ufs_hba *hba)
if (!host)
return -ENOMEM;
+ /*
+ * Inline crypto is currently broken with ufs-hisi because the keyslots
+ * overlap with the vendor-specific SYS CTRL registers -- and even if
+ * software uses only non-overlapping keyslots, the kernel crashes when
+ * programming a key or a UFS error occurs on the first encrypted I/O.
+ */
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_CRYPTO;
+
host->hba = hba;
ufshcd_set_variant(hba, host);
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c69c29a1ceb9..4b2ec3745a16 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1002,6 +1002,13 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
| UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE
| UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP);
}
+
+ /*
+ * Inline crypto is currently broken with ufs-qcom at least because the
+ * device tree doesn't include the crypto registers. There are likely
+ * to be other issues that will need to be addressed too.
+ */
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_CRYPTO;
}
static void ufs_qcom_set_caps(struct ufs_hba *hba)
diff --git a/drivers/scsi/ufs/ufshcd-crypto.c b/drivers/scsi/ufs/ufshcd-crypto.c
index 1b8e14d30c04..cd7ca50a1dd9 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.c
+++ b/drivers/scsi/ufs/ufshcd-crypto.c
@@ -365,3 +365,29 @@ void ufshcd_crypto_destroy_keyslot_manager(struct ufs_hba *hba)
{
blk_ksm_destroy(&hba->ksm);
}
+
+int ufshcd_prepare_lrbp_crypto(struct ufs_hba *hba,
+ struct scsi_cmnd *cmd,
+ struct ufshcd_lrb *lrbp)
+{
+ struct rq_crypt_ctx *rc = &cmd->request->rq_crypt_ctx;
+ struct bio_crypt_ctx *bc = rc->bc;
+
+ lrbp->crypto_enable = false;
+
+ if (WARN_ON(!(hba->caps & UFSHCD_CAP_CRYPTO))) {
+ /*
+ * Upper layer asked us to do inline encryption
+ * but that isn't enabled, so we fail this request.
+ */
+ return -EINVAL;
+ }
+ if (!ufshcd_keyslot_valid(hba, rc->keyslot))
+ return -EINVAL;
+
+ lrbp->crypto_enable = true;
+ lrbp->crypto_key_slot = rc->keyslot;
+ lrbp->data_unit_num = bc->bc_dun[0];
+
+ return 0;
+}
diff --git a/drivers/scsi/ufs/ufshcd-crypto.h b/drivers/scsi/ufs/ufshcd-crypto.h
index 8270c0c5081a..c76f93ede51c 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.h
+++ b/drivers/scsi/ufs/ufshcd-crypto.h
@@ -16,6 +16,15 @@ static inline bool ufshcd_hba_is_crypto_supported(struct ufs_hba *hba)
return hba->crypto_capabilities.reg_val != 0;
}
+int ufshcd_prepare_lrbp_crypto(struct ufs_hba *hba,
+ struct scsi_cmnd *cmd,
+ struct ufshcd_lrb *lrbp);
+
+static inline bool ufshcd_lrbp_crypto_enabled(struct ufshcd_lrb *lrbp)
+{
+ return lrbp->crypto_enable;
+}
+
void ufshcd_crypto_enable(struct ufs_hba *hba);
void ufshcd_crypto_disable(struct ufs_hba *hba);
@@ -49,6 +58,11 @@ static inline void ufshcd_crypto_setup_rq_keyslot_manager(struct ufs_hba *hba,
static inline void ufshcd_crypto_destroy_keyslot_manager(struct ufs_hba *hba)
{ }
+static inline bool ufshcd_lrbp_crypto_enabled(struct ufshcd_lrb *lrbp)
+{
+ return false;
+}
+
#endif /* CONFIG_SCSI_UFS_CRYPTO */
#endif /* _UFSHCD_CRYPTO_H */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 825d9eb34f10..9ecfc10feafb 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -47,6 +47,7 @@
#include "unipro.h"
#include "ufs-sysfs.h"
#include "ufs_bsg.h"
+#include "ufshcd-crypto.h"
#define CREATE_TRACE_POINTS
#include <trace/events/ufs.h>
@@ -816,7 +817,14 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
*/
static inline void ufshcd_hba_start(struct ufs_hba *hba)
{
- ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE);
+ u32 val = CONTROLLER_ENABLE;
+
+ if (ufshcd_hba_is_crypto_supported(hba)) {
+ ufshcd_crypto_enable(hba);
+ val |= CRYPTO_GENERAL_ENABLE;
+ }
+
+ ufshcd_writel(hba, val, REG_CONTROLLER_ENABLE);
}
/**
@@ -2192,9 +2200,23 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
dword_0 |= UTP_REQ_DESC_INT_CMD;
/* Transfer request descriptor header fields */
+ if (ufshcd_lrbp_crypto_enabled(lrbp)) {
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ dword_0 |= UTP_REQ_DESC_CRYPTO_ENABLE_CMD;
+ dword_0 |= lrbp->crypto_key_slot;
+ req_desc->header.dword_1 =
+ cpu_to_le32(lower_32_bits(lrbp->data_unit_num));
+ req_desc->header.dword_3 =
+ cpu_to_le32(upper_32_bits(lrbp->data_unit_num));
+#endif /* CONFIG_SCSI_UFS_CRYPTO */
+ } else {
+ /* dword_1 and dword_3 are reserved, hence they are set to 0 */
+ req_desc->header.dword_1 = 0;
+ req_desc->header.dword_3 = 0;
+ }
+
req_desc->header.dword_0 = cpu_to_le32(dword_0);
- /* dword_1 is reserved, hence it is set to 0 */
- req_desc->header.dword_1 = 0;
+
/*
* assigning invalid value for command status. Controller
* updates OCS on command completion, with the command
@@ -2202,8 +2224,6 @@ static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
*/
req_desc->header.dword_2 =
cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
- /* dword_3 is reserved, hence it is set to 0 */
- req_desc->header.dword_3 = 0;
req_desc->prd_table_length = 0;
}
@@ -2437,6 +2457,20 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
lrbp->task_tag = tag;
lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ if (cmd->request->rq_crypt_ctx.keyslot >= 0) {
+ err = ufshcd_prepare_lrbp_crypto(hba, cmd, lrbp);
+ if (err) {
+ lrbp->cmd = NULL;
+ ufshcd_release(hba);
+ goto out;
+ }
+ } else {
+ lrbp->crypto_enable = false;
+ }
+#endif
+
lrbp->req_abort_skip = false;
ufshcd_comp_scsi_upiu(hba, lrbp);
@@ -2470,6 +2504,9 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
lrbp->task_tag = tag;
lrbp->lun = 0; /* device management cmd is not specific to any LUN */
lrbp->intr_cmd = true; /* No interrupt aggregation */
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ lrbp->crypto_enable = false; /* No crypto operations */
+#endif
hba->dev_cmd.type = cmd_type;
return ufshcd_comp_devman_upiu(hba, lrbp);
@@ -4208,6 +4245,8 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
{
int err;
+ ufshcd_crypto_disable(hba);
+
ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE);
err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
CONTROLLER_ENABLE, CONTROLLER_DISABLE,
@@ -4624,6 +4663,8 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
if (ufshcd_is_rpm_autosuspend_allowed(hba))
sdev->rpm_autosuspend = 1;
+ ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
+
return 0;
}
@@ -8304,6 +8345,7 @@ EXPORT_SYMBOL_GPL(ufshcd_remove);
*/
void ufshcd_dealloc_host(struct ufs_hba *hba)
{
+ ufshcd_crypto_destroy_keyslot_manager(hba);
scsi_host_put(hba->host);
}
EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
@@ -8513,6 +8555,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
/* Reset the attached device */
ufshcd_vops_device_reset(hba);
+ /* Init crypto */
+ err = ufshcd_hba_init_crypto(hba);
+ if (err) {
+ dev_err(hba->dev, "crypto setup failed\n");
+ goto out_remove_scsi_host;
+ }
+
/* Host controller enable */
err = ufshcd_hba_enable(hba);
if (err) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 7b8a87418f0c..c8f948aa5e3d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -168,6 +168,9 @@ struct ufs_pm_lvl_states {
* @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
* @issue_time_stamp: time stamp for debug purposes
* @compl_time_stamp: time stamp for statistics
+ * @crypto_enable: whether or not the request needs inline crypto operations
+ * @crypto_key_slot: the key slot to use for inline crypto
+ * @data_unit_num: the data unit number for the first block for inline crypto
* @req_abort_skip: skip request abort task flag
*/
struct ufshcd_lrb {
@@ -192,6 +195,11 @@ struct ufshcd_lrb {
bool intr_cmd;
ktime_t issue_time_stamp;
ktime_t compl_time_stamp;
+#if IS_ENABLED(CONFIG_SCSI_UFS_CRYPTO)
+ bool crypto_enable;
+ u8 crypto_key_slot;
+ u64 data_unit_num;
+#endif /* CONFIG_SCSI_UFS_CRYPTO */
bool req_abort_skip;
};
--
2.25.0.265.gbab2e86ba0-goog
Powered by blists - more mailing lists