Message-id: <166432039241.17572.3454219701145225283@noble.neil.brown.name>
Date:   Wed, 28 Sep 2022 09:13:12 +1000
From:   "NeilBrown" <neilb@...e.de>
To:     "Jeff Layton" <jlayton@...nel.org>
Cc:     tytso@....edu, adilger.kernel@...ger.ca, djwong@...nel.org,
        david@...morbit.com, trondmy@...merspace.com,
        viro@...iv.linux.org.uk, zohar@...ux.ibm.com, xiubli@...hat.com,
        chuck.lever@...cle.com, lczerner@...hat.com, jack@...e.cz,
        bfields@...ldses.org, brauner@...nel.org, fweimer@...hat.com,
        linux-man@...r.kernel.org, linux-btrfs@...r.kernel.org,
        linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
        ceph-devel@...r.kernel.org, linux-ext4@...r.kernel.org,
        linux-nfs@...r.kernel.org, linux-xfs@...r.kernel.org
Subject: Re: [PATCH] statx, inode: document the new STATX_VERSION field

On Wed, 28 Sep 2022, Jeff Layton wrote:
> I'm proposing to expose the inode change attribute via statx [1]. Document
> what this value means and what an observer can infer from it changing.
> 
> Signed-off-by: Jeff Layton <jlayton@...nel.org>
> 
> [1]: https://lore.kernel.org/linux-nfs/d9c065939af2728b1c0768d5ef7526995b634902.camel@kernel.org/T/#t
> ---
>  man2/statx.2 | 13 +++++++++++++
>  man7/inode.7 | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 44 insertions(+)
> 
> Another RFC posting to hopefully nail down the desired semantics. I
> purposefully left out verbiage around atomicity, with the expectation
> that we should be able to make the existing filesystems that support
> i_version bump the counter after a write instead of before.

I think we do need documentation about ordering.  Users will depend on
the version number not being seen to increase before the change is
visible.  They may also depend on the increase being visible when a
{f,i,fa}notify event is generated.  Having this explicitly documented
gives fs/vfs developers a clear reference, and application developers a
clear promise.

> 
> Also, for v5:
> - drop _INO/_ino from the name (it's redunant)
> - add STATX_ATTR_VERSION_MONOTONIC
> 
> diff --git a/man2/statx.2 b/man2/statx.2
> index 0d1b4591f74c..b2fdb5ddf97a 100644
> --- a/man2/statx.2
> +++ b/man2/statx.2
> @@ -62,6 +62,7 @@ struct statx {
>      __u32 stx_dev_major;   /* Major ID */
>      __u32 stx_dev_minor;   /* Minor ID */
>      __u64 stx_mnt_id;      /* Mount ID */
> +    __u64 stx_version; /* Inode change attribute */
>  };
>  .EE
>  .in
> @@ -247,6 +248,7 @@ STATX_BTIME	Want stx_btime
>  STATX_ALL	The same as STATX_BASIC_STATS | STATX_BTIME.
>  	It is deprecated and should not be used.
>  STATX_MNT_ID	Want stx_mnt_id (since Linux 5.8)
> +STATX_VERSION	Want stx_version (DRAFT)
>  .TE
>  .in
>  .PP
> @@ -407,10 +409,16 @@ This is the same number reported by
>  .BR name_to_handle_at (2)
>  and corresponds to the number in the first field in one of the records in
>  .IR /proc/self/mountinfo .
> +.TP
> +.I stx_version
> +The inode version, also known as the inode change attribute. See
> +.BR inode (7)
> +for details.
>  .PP
>  For further information on the above fields, see
>  .BR inode (7).
>  .\"
> +.TP
>  .SS File attributes
>  The
>  .I stx_attributes
> @@ -489,6 +497,11 @@ without an explicit
>  See
>  .BR mmap (2)
>  for more information.
> +.TP
> +.BR STATX_ATTR_VERSION_MONOTONIC " (since Linux 6.?)"
> +The stx_version value monotonically increases over time and will never appear
> +to go backward, even in the event of a crash. This can allow an application to
> +make a better determination about ordering when viewing different versions.
>  .SH RETURN VALUE
>  On success, zero is returned.
>  On error, \-1 is returned, and
> diff --git a/man7/inode.7 b/man7/inode.7
> index 9b255a890720..ec7f80dacaa8 100644
> --- a/man7/inode.7
> +++ b/man7/inode.7
> @@ -184,6 +184,12 @@ Last status change timestamp (ctime)
>  This is the file's last status change timestamp.
>  It is changed by writing or by setting inode information
>  (i.e., owner, group, link count, mode, etc.).
> +.TP
> +Inode version (version)
> +(not returned in the \fIstat\fP structure); \fIstatx.stx_version\fP
> +.IP
> +This is the inode change counter. See the discussion of
> +\fBthe inode version counter\fP, below.
>  .PP
>  The timestamp fields report time measured with a zero point at the
>  .IR Epoch ,
> @@ -424,6 +430,31 @@ on a directory means that a file
>  in that directory can be renamed or deleted only by the owner
>  of the file, by the owner of the directory, and by a privileged
>  process.
> +.SS The inode version counter
> +.PP
> +The
> +.I statx.stx_version
> +field is the inode change counter. Any operation that would result in a
> +change to \fIstatx.stx_ctime\fP must result in an increase to this value.
> +The value must increase even in the case where the ctime change is not
> +evident due to coarse timestamp granularity.

I think "could result" rather than "would result".

I'm a little uncomfortable with "must result" given that we don't
increase the value when the previous value hasn't been seen.
We could say "must cause subsequent reads of this counter to be larger
than any previous read", but that is somewhat verbose.

> +.PP
> +An observer cannot infer anything from amount of increase about the
> +nature or magnitude of the change. If the returned value is different
> +from the last time it was checked, then something has made an explicit
> +data and/or metadata change to the inode.

Maybe it would be enough to be more explicit here:
 ...  or magnitude of that change.  In fact, a single increment can
 reflect multiple discrete changes if the value was not checked during
 those changes.
??

Maybe it is a small point, but these two paragraphs seem to be
contradictory.  If a change MUST increase the counter, then surely 6
changes MUST increase the counter by at least 6, so you CAN infer
something from the magnitude..


I would also prefer using the passive voice rather than the vague
"something".
...  then an explicit data and/or metadata change has been made to the
inode.

> +.PP
> +In the event of a system crash this value can appear to go backward,
> +if it were queried before being written to the backing store. If
> +the value were then incremented again after restart, then an observer

I think the "incremented after restart" is irrelevant.  If the value is
queried before being written to backing store, and then after a crash
the value from backing store is used, the value will appear to go
backwards.  This is enough to mean it isn't MONOTONIC.

> +could miss noticing a change. Applications that persist stx_version values
> +across a reboot should take care to mitigate this problem. If the filesystem
> +reports \fISTATX_ATTR_VERSION_MONOTONIC\fP in stx_attributes, then it is not
> +subject to this problem.

I do like the addition of STATX_ATTR_VERSION_MONOTONIC here.

> +.PP
> +The stx_version is a Linux extension and is not supported by all filesystems.
> +The application must verify that the \fISTATX_VERSION\fP bit is set in the
> +returned \fIstatx.stx_mask\fP before relying on this field.
>  .SH STANDARDS
>  If you need to obtain the definition of the
>  .I blkcnt_t
> -- 
> 2.37.3
> 
> 

Thanks,
NeilBrown

Powered by blists - more mailing lists