| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231121223909.4617-4-ebiggers@kernel.org>
Date: Tue, 21 Nov 2023 14:39:08 -0800
From: Eric Biggers <ebiggers@...nel.org>
To: fstests@...r.kernel.org
Cc: linux-fscrypt@...r.kernel.org,
linux-ext4@...r.kernel.org,
linux-f2fs-devel@...ts.sourceforge.net,
Daniel Rosenberg <drosen@...gle.com>
Subject: [PATCH v2 3/4] common/encrypt: support custom data unit size
From: Eric Biggers <ebiggers@...gle.com>
Make _require_scratch_encryption() and
_require_encryption_policy_support() support the new '-s' option to
set_encpolicy to specify a custom value of log2_data_unit_size.
Likewise, make _verify_ciphertext_for_encryption_policy() accept an
argument "log2_dusize=*" to cause it to use the specified data unit size
for the test and verify that the file contents are encrypted as expected
for that data unit size.
Signed-off-by: Eric Biggers <ebiggers@...gle.com>
---
common/encrypt | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/common/encrypt b/common/encrypt
index 5688745c..d90a566a 100644
--- a/common/encrypt
+++ b/common/encrypt
@@ -1,32 +1,41 @@
##/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2016 Google, Inc. All Rights Reserved.
#
# Functions for setting up and testing file encryption
#
# _require_scratch_encryption [-c CONTENTS_MODE] [-n FILENAMES_MODE]
# [-f POLICY_FLAGS] [-v POLICY_VERSION]
+# [-s LOG2_DUSIZE]
#
# Require encryption support on the scratch device.
#
# This checks for support for the default type of encryption policy (v1 with
# AES-256-XTS and AES-256-CTS). Options can be specified to also require
# support for a different type of encryption policy.
#
_require_scratch_encryption()
{
- _require_scratch
+ local arg
+ _require_scratch
_require_xfs_io_command "set_encpolicy"
+ for arg; do
+ if [ "$arg" = "-s" ]; then
+ # -s option was added later. Make sure it's available.
+ _require_xfs_io_command "set_encpolicy" "-s"
+ fi
+ done
+
# The 'test_dummy_encryption' mount option interferes with trying to use
# encryption for real, even if we are just trying to get/set policies
# and never put any keys in the keyring. So skip the real encryption
# tests if the 'test_dummy_encryption' mount option was specified.
_exclude_scratch_mount_option "test_dummy_encryption"
# Make a filesystem on the scratch device with the encryption feature
# enabled. If this fails then probably the userspace tools (e.g.
# e2fsprogs or f2fs-tools) are too old to understand encryption.
if ! _scratch_mkfs_encrypted &>>$seqres.full; then
@@ -67,35 +76,35 @@ _require_scratch_encryption()
_require_encryption_policy_support()
{
local mnt=$1
local dir=$mnt/tmpdir
local set_encpolicy_args=""
local policy_flags=0
local policy_version=1
local c
OPTIND=2
- while getopts "c:n:f:v:" c; do
+ while getopts "c:n:f:s:v:" c; do
case $c in
- c|n)
+ c|n|s)
set_encpolicy_args+=" -$c $OPTARG"
;;
f)
set_encpolicy_args+=" -$c $OPTARG"
policy_flags=$OPTARG
;;
v)
set_encpolicy_args+=" -$c $OPTARG"
policy_version=$OPTARG
;;
*)
- _fail "Unrecognized option '$c'"
+ _fail "${FUNCNAME[0]}: unrecognized option '$c'"
;;
esac
done
set_encpolicy_args=${set_encpolicy_args# }
echo "Checking whether kernel supports encryption policy: $set_encpolicy_args" \
>> $seqres.full
if (( policy_flags & (FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 |
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32) )); then
@@ -756,28 +765,27 @@ _do_verify_ciphertext_for_encryption_policy()
# Now unmount the filesystem and verify the ciphertext we just wrote.
_scratch_unmount
echo "Verifying encrypted file contents" >> $seqres.full
for f in "${test_contents_files[@]}"; do
read -r src inode blocklist <<< "$f"
nonce=$(_get_encryption_nonce $SCRATCH_DEV $inode)
_dump_ciphertext_blocks $SCRATCH_DEV $blocklist > $tmp.actual_contents
$crypt_contents_cmd $contents_encryption_mode $raw_key_hex \
- --file-nonce=$nonce --data-unit-size=$blocksize \
- --inode-number=$inode < $src > $tmp.expected_contents
+ --file-nonce=$nonce --inode-number=$inode \
+ < $src > $tmp.expected_contents
if ! cmp $tmp.expected_contents $tmp.actual_contents; then
_fail "Expected encrypted contents != actual encrypted contents. File: $f"
fi
$crypt_contents_cmd $contents_encryption_mode $raw_key_hex \
- --decrypt --file-nonce=$nonce \
- --data-unit-size=$blocksize --inode-number=$inode \
+ --decrypt --file-nonce=$nonce --inode-number=$inode \
< $tmp.actual_contents > $tmp.decrypted_contents
if ! cmp $src $tmp.decrypted_contents; then
_fail "Contents decryption sanity check failed. File: $f"
fi
done
echo "Verifying encrypted file names" >> $seqres.full
for f in "${test_filenames_files[@]}"; do
read -r name inode dir_inode padding <<< "$f"
nonce=$(_get_encryption_nonce $SCRATCH_DEV $dir_inode)
@@ -837,28 +845,30 @@ _fscrypt_mode_name_to_num()
# policy of the specified type is used.
#
# The first two parameters are the contents and filenames encryption modes to
# test. The following optional parameters are also accepted to further modify
# the type of encryption policy that is tested:
#
# 'v2': test a v2 encryption policy
# 'direct': test the DIRECT_KEY policy flag
# 'iv_ino_lblk_64': test the IV_INO_LBLK_64 policy flag
# 'iv_ino_lblk_32': test the IV_INO_LBLK_32 policy flag
+# 'log2_dusize=N': test the log2_data_unit_size field
#
_verify_ciphertext_for_encryption_policy()
{
local contents_encryption_mode=$1
local filenames_encryption_mode=$2
local opt
local policy_version=1
local policy_flags=0
+ local log2_dusize=0
local set_encpolicy_args=""
local crypt_util_args=""
local crypt_util_contents_args=""
local crypt_util_filename_args=""
local expected_identifier
shift 2
for opt; do
case "$opt" in
v2)
@@ -870,30 +880,36 @@ _verify_ciphertext_for_encryption_policy()
_fail "For direct key mode, contents and filenames modes must match"
fi
(( policy_flags |= FSCRYPT_POLICY_FLAG_DIRECT_KEY ))
;;
iv_ino_lblk_64)
(( policy_flags |= FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 ))
;;
iv_ino_lblk_32)
(( policy_flags |= FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 ))
;;
+ log2_dusize=*)
+ log2_dusize=$(echo "$opt" | sed 's/^log2_dusize=//')
+ ;;
*)
_fail "Unknown option '$opt' passed to ${FUNCNAME[0]}"
;;
esac
done
local contents_mode_num=$(_fscrypt_mode_name_to_num $contents_encryption_mode)
local filenames_mode_num=$(_fscrypt_mode_name_to_num $filenames_encryption_mode)
set_encpolicy_args+=" -c $contents_mode_num"
set_encpolicy_args+=" -n $filenames_mode_num"
+ if (( log2_dusize != 0 )); then
+ set_encpolicy_args+=" -s $log2_dusize"
+ fi
crypt_util_contents_args+=" --mode-num=$contents_mode_num"
crypt_util_filename_args+=" --mode-num=$filenames_mode_num"
if (( policy_version > 1 )); then
set_encpolicy_args+=" -v 2"
crypt_util_args+=" --kdf=HKDF-SHA512"
if (( policy_flags & FSCRYPT_POLICY_FLAG_DIRECT_KEY )); then
crypt_util_args+=" --direct-key"
elif (( policy_flags & FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 )); then
crypt_util_args+=" --iv-ino-lblk-64"
@@ -923,20 +939,26 @@ _verify_ciphertext_for_encryption_policy()
echo "Creating encryption-capable filesystem" >> $seqres.full
if (( policy_flags & (FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 |
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32) )); then
_scratch_mkfs_stable_inodes_encrypted &>> $seqres.full
else
_scratch_mkfs_encrypted &>> $seqres.full
fi
_scratch_mount
+ if (( log2_dusize != 0 )); then
+ crypt_util_contents_args+=" --data-unit-size=$((1 << log2_dusize))"
+ else
+ crypt_util_contents_args+=" --data-unit-size=$(_get_block_size $SCRATCH_MNT)"
+ fi
+
crypt_util_args+=" --fs-uuid=$(blkid -s UUID -o value $SCRATCH_DEV | tr -d -)"
crypt_util_contents_args+="$crypt_util_args"
crypt_util_filename_args+="$crypt_util_args"
echo "Generating encryption key" >> $seqres.full
local raw_key=$(_generate_raw_encryption_key)
if (( policy_version > 1 )); then
local keyspec=$(_add_enckey $SCRATCH_MNT "$raw_key" \
| awk '{print $NF}')
--
2.42.1
Powered by blists - more mailing lists