linux-ext4 - [PATCH v3] e2fsprogs: misc/mke2fs.8.in: Correct valid cluster-size values

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240403043037.3992724-1-srivathsa.d.dara@oracle.com>
Date: Wed,  3 Apr 2024 04:30:37 +0000
From: Srivathsa Dara <srivathsa.d.dara@...cle.com>
To: linux-ext4@...r.kernel.org
Cc: tytso@....edu, adilger@...ger.ca, djwong@...nel.org,
        rajesh.sivaramasubramaniom@...cle.com, junxiao.bi@...cle.com
Subject: [PATCH v3] e2fsprogs: misc/mke2fs.8.in: Correct valid cluster-size values

According to the mke2fs man page, the supported cluster-size values
for an ext4 filesystem are 2048 to 256M bytes. However, this is not
the case.

When mkfs is run to create a filesystem with following specifications:
* 1k blocksize and cluster-size greater than 32M
* 2k blocksize and cluster-size greater than 64M
* 4k blocksize and cluster-size greater than 128M
mkfs fails with "Invalid argument passed to ext2 library while trying
to create journal" error. In general, when the cluster-size to blocksize
ratio is greater than 32k, mkfs fails with this error.

Went through the code and found out that the function
`ext2fs_new_range()` is the source of this error. This is because when
the cluster-size to blocksize ratio exceeds 32k, the length argument
to the function `ext2fs_new_range()` results in 0. Hence, the error.

This patch corrects the valid cluster-size values.

v2->v3:
Remove redundant words and add info about how cluster-sizes that are
not powers of 2 are rounded.
---
 misc/mke2fs.8.in | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in
index 30f97bb5..c7b21f9d 100644
--- a/misc/mke2fs.8.in
+++ b/misc/mke2fs.8.in
@@ -232,9 +232,13 @@ test is used instead of a fast read-only test.
 .TP
 .B \-C " cluster-size"
 Specify the size of cluster in bytes for file systems using the bigalloc
-feature.  Valid cluster-size values are from 2048 to 256M bytes per
-cluster.  This can only be specified if the bigalloc feature is
-enabled.  (See the
+feature. Valid cluster-size values range from 2 to 32768 times the
+filesystem blocksize and must be a power of 2. If a cluster-size that is
+not a power of 2 is provided, it will be rounded down to the nearest
+power of 2 that is less than the given cluster-size. For example,
+specifying '-C 20k', '-C 30k', or '-C 17k' will result in a cluster-size
+of 16k. The cluster-size can only be specified if the
+bigalloc feature is enabled.  (See the
 .B ext4 (5)
 man page for more details about bigalloc.)   The default cluster size if
 bigalloc is enabled is 16 times the block size.
-- 
2.39.3