| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241121172702.GY9425@frogsfrogsfrogs>
Date: Thu, 21 Nov 2024 09:27:02 -0800
From: "Darrick J. Wong" <djwong@...nel.org>
To: Nirjhar Roy <nirjhar@...ux.ibm.com>
Cc: fstests@...r.kernel.org, linux-ext4@...r.kernel.org,
linux-xfs@...r.kernel.org, ritesh.list@...il.com,
ojaswin@...ux.ibm.com, zlang@...nel.org
Subject: Re: [PATCH v3 3/3] generic: Addition of new tests for extsize hints
On Thu, Nov 21, 2024 at 10:39:12AM +0530, Nirjhar Roy wrote:
> This commit adds new tests that checks the behaviour of xfs/ext4
> filesystems when extsize hint is set on file with inode size as 0,
> non-empty files with allocated and delalloc extents and so on.
> Although currently this test is placed under tests/generic, it
> only runs on xfs and there is an ongoing patch series[1] to
> enable extsize hints for ext4 as well.
>
> [1] https://lore.kernel.org/linux-ext4/cover.1726034272.git.ojaswin@linux.ibm.com/
>
> Reviewed-by Ritesh Harjani (IBM) <ritesh.list@...il.com>
> Reviewed-by: Ojaswin Mujoo <ojaswin@...ux.ibm.com>
> Suggested-by: Ojaswin Mujoo <ojaswin@...ux.ibm.com>
> Signed-off-by: Nirjhar Roy <nirjhar@...ux.ibm.com>
Looks ok, though you might want to change generic/366 to a higher number
because that's now taken.
Reviewed-by: "Darrick J. Wong" <djwong@...nel.org>
--D
> ---
> tests/generic/366 | 175 ++++++++++++++++++++++++++++++++++++++++++
> tests/generic/366.out | 26 +++++++
> 2 files changed, 201 insertions(+)
> create mode 100755 tests/generic/366
> create mode 100644 tests/generic/366.out
>
> diff --git a/tests/generic/366 b/tests/generic/366
> new file mode 100755
> index 00000000..25d23f42
> --- /dev/null
> +++ b/tests/generic/366
> @@ -0,0 +1,175 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2024 Nirjhar Roy (nirjhar@...ux.ibm.com). All Rights Reserved.
> +#
> +# FS QA Test 366
> +#
> +# This test verifies that extent allocation hint setting works correctly on
> +# files with no extents allocated and non-empty files which are truncated.
> +# It also checks that the extent hints setting fails with non-empty file
> +# i.e, with any file with allocated extents or delayed allocation. We also
> +# check if the extsize value and the xflag bit actually got reflected after
> +# setting/re-setting the extsize value.
> +
> +. ./common/config
> +. ./common/filter
> +. ./common/preamble
> +
> +_begin_fstest ioctl quick
> +
> +_fixed_by_kernel_commit "2a492ff66673 \
> + xfs: Check for delayed allocations before setting \
> + extsize"
> +
> +_require_scratch_extsize
> +
> +FILE_DATA_SIZE=1M
> +
> +get_default_extsize()
> +{
> + if [ -z $1 ] || [ ! -d $1 ]; then
> + echo "Missing mount point argument for get_default_extsize"
> + exit 1
> + fi
> + $XFS_IO_PROG -c "extsize" "$1" | sed 's/^\[\([0-9]\+\)\].*/\1/'
> +}
> +
> +filter_extsz()
> +{
> + sed "s/\[$1\]/\[EXTSIZE\]/g"
> +}
> +
> +setup()
> +{
> + _scratch_mkfs >> "$seqres.full" 2>&1
> + _scratch_mount >> "$seqres.full" 2>&1
> + BLKSZ=`_get_block_size $SCRATCH_MNT`
> + DEFAULT_EXTSIZE=`get_default_extsize $SCRATCH_MNT`
> + EXTSIZE=$(( BLKSZ*2 ))
> + # Make sure the new extsize is not the same as the default
> + # extsize so that we can observe it changing
> + [[ "$DEFAULT_EXTSIZE" -eq "$EXTSIZE" ]] && EXTSIZE=$(( BLKSZ*4 ))
> +}
> +
> +read_file_extsize()
> +{
> + $XFS_IO_PROG -c "extsize" $1 | _filter_scratch | filter_extsz $2
> +}
> +
> +check_extsz_and_xflag()
> +{
> + local filename=$1
> + local extsize=$2
> + read_file_extsize $filename $extsize
> + _test_fsxattr_xflag $filename "extsize" && echo "e flag set" || \
> + echo "e flag unset"
> +}
> +
> +check_extsz_xflag_across_remount()
> +{
> + local filename=$1
> + local extsize=$2
> + _scratch_cycle_mount
> + check_extsz_and_xflag $filename $extsize
> +}
> +
> +# Extsize flag should be cleared when extsize is reset, so this function
> +# checks that this behavior is followed.
> +reset_extsz_and_recheck_extsz_xflag()
> +{
> + local filename=$1
> + echo "Re-setting extsize hint to 0"
> + $XFS_IO_PROG -c "extsize 0" $filename
> + check_extsz_xflag_across_remount $filename "0"
> +}
> +
> +check_extsz_xflag_before_and_after_reset()
> +{
> + local filename=$1
> + local extsize=$2
> + check_extsz_xflag_across_remount $filename $extsize
> + reset_extsz_and_recheck_extsz_xflag $filename
> +}
> +
> +test_empty_file()
> +{
> + echo "TEST: Set extsize on empty file"
> + local filename=$1
> + $XFS_IO_PROG \
> + -c "open -f $filename" \
> + -c "extsize $EXTSIZE" \
> +
> + check_extsz_xflag_before_and_after_reset $filename $EXTSIZE
> + echo
> +}
> +
> +test_data_delayed()
> +{
> + echo "TEST: Set extsize on non-empty file with delayed allocation"
> + local filename=$1
> + $XFS_IO_PROG \
> + -c "open -f $filename" \
> + -c "pwrite -q 0 $FILE_DATA_SIZE" \
> + -c "extsize $EXTSIZE" | _filter_scratch
> +
> + echo "test for default extsize setting if any"
> + read_file_extsize $filename $DEFAULT_EXTSIZE
> + echo
> +}
> +
> +test_data_allocated()
> +{
> + echo "TEST: Set extsize on non-empty file with allocated extents"
> + local filename=$1
> + $XFS_IO_PROG \
> + -c "open -f $filename" \
> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \
> + -c "extsize $EXTSIZE" | _filter_scratch
> +
> + echo "test for default extsize setting if any"
> + read_file_extsize $filename $DEFAULT_EXTSIZE
> + echo
> +}
> +
> +test_truncate_allocated()
> +{
> + echo "TEST: Set extsize after truncating a file with allocated extents"
> + local filename=$1
> + $XFS_IO_PROG \
> + -c "open -f $filename" \
> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \
> + -c "truncate 0" \
> + -c "extsize $EXTSIZE" \
> +
> + check_extsz_xflag_across_remount $filename $EXTSIZE
> + echo
> +}
> +
> +test_truncate_delayed()
> +{
> + echo "TEST: Set extsize after truncating a file with delayed allocation"
> + local filename=$1
> + $XFS_IO_PROG \
> + -c "open -f $filename" \
> + -c "pwrite -q 0 $FILE_DATA_SIZE" \
> + -c "truncate 0" \
> + -c "extsize $EXTSIZE" \
> +
> + check_extsz_xflag_across_remount $filename $EXTSIZE
> + echo
> +}
> +
> +setup
> +echo -e "EXTSIZE = $EXTSIZE DEFAULT_EXTSIZE = $DEFAULT_EXTSIZE \
> + BLOCKSIZE = $BLKSZ\n" >> "$seqres.full"
> +
> +NEW_FILE_NAME_PREFIX=$SCRATCH_MNT/new-file-
> +
> +test_empty_file "$NEW_FILE_NAME_PREFIX"00
> +test_data_delayed "$NEW_FILE_NAME_PREFIX"01
> +test_data_allocated "$NEW_FILE_NAME_PREFIX"02
> +test_truncate_allocated "$NEW_FILE_NAME_PREFIX"03
> +test_truncate_delayed "$NEW_FILE_NAME_PREFIX"04
> +
> +status=0
> +exit
> diff --git a/tests/generic/366.out b/tests/generic/366.out
> new file mode 100644
> index 00000000..cdd2f5fa
> --- /dev/null
> +++ b/tests/generic/366.out
> @@ -0,0 +1,26 @@
> +QA output created by 366
> +TEST: Set extsize on empty file
> +[EXTSIZE] SCRATCH_MNT/new-file-00
> +e flag set
> +Re-setting extsize hint to 0
> +[EXTSIZE] SCRATCH_MNT/new-file-00
> +e flag unset
> +
> +TEST: Set extsize on non-empty file with delayed allocation
> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-01: Invalid argument
> +test for default extsize setting if any
> +[EXTSIZE] SCRATCH_MNT/new-file-01
> +
> +TEST: Set extsize on non-empty file with allocated extents
> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-02: Invalid argument
> +test for default extsize setting if any
> +[EXTSIZE] SCRATCH_MNT/new-file-02
> +
> +TEST: Set extsize after truncating a file with allocated extents
> +[EXTSIZE] SCRATCH_MNT/new-file-03
> +e flag set
> +
> +TEST: Set extsize after truncating a file with delayed allocation
> +[EXTSIZE] SCRATCH_MNT/new-file-04
> +e flag set
> +
> --
> 2.43.5
>
>
Powered by blists - more mailing lists