| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <99f4d397-61a7-441d-b64d-3e913a0a643a@linux.ibm.com>
Date: Fri, 22 Nov 2024 00:04:37 +0530
From: Nirjhar Roy <nirjhar@...ux.ibm.com>
To: "Darrick J. Wong" <djwong@...nel.org>
Cc: fstests@...r.kernel.org, linux-ext4@...r.kernel.org,
linux-xfs@...r.kernel.org, ritesh.list@...il.com,
ojaswin@...ux.ibm.com, zlang@...nel.org
Subject: Re: [PATCH v3 3/3] generic: Addition of new tests for extsize hints
On 11/21/24 22:57, Darrick J. Wong wrote:
> On Thu, Nov 21, 2024 at 10:39:12AM +0530, Nirjhar Roy wrote:
>> This commit adds new tests that checks the behaviour of xfs/ext4
>> filesystems when extsize hint is set on file with inode size as 0,
>> non-empty files with allocated and delalloc extents and so on.
>> Although currently this test is placed under tests/generic, it
>> only runs on xfs and there is an ongoing patch series[1] to
>> enable extsize hints for ext4 as well.
>>
>> [1] https://lore.kernel.org/linux-ext4/cover.1726034272.git.ojaswin@linux.ibm.com/
>>
>> Reviewed-by Ritesh Harjani (IBM) <ritesh.list@...il.com>
>> Reviewed-by: Ojaswin Mujoo <ojaswin@...ux.ibm.com>
>> Suggested-by: Ojaswin Mujoo <ojaswin@...ux.ibm.com>
>> Signed-off-by: Nirjhar Roy <nirjhar@...ux.ibm.com>
> Looks ok, though you might want to change generic/366 to a higher number
> because that's now taken.
>
> Reviewed-by: "Darrick J. Wong" <djwong@...nel.org>
>
> --D
Okay. I will update the test sequence number in the next revision.
--NR
>> ---
>> tests/generic/366 | 175 ++++++++++++++++++++++++++++++++++++++++++
>> tests/generic/366.out | 26 +++++++
>> 2 files changed, 201 insertions(+)
>> create mode 100755 tests/generic/366
>> create mode 100644 tests/generic/366.out
>>
>> diff --git a/tests/generic/366 b/tests/generic/366
>> new file mode 100755
>> index 00000000..25d23f42
>> --- /dev/null
>> +++ b/tests/generic/366
>> @@ -0,0 +1,175 @@
>> +#! /bin/bash
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Copyright (c) 2024 Nirjhar Roy (nirjhar@...ux.ibm.com). All Rights Reserved.
>> +#
>> +# FS QA Test 366
>> +#
>> +# This test verifies that extent allocation hint setting works correctly on
>> +# files with no extents allocated and non-empty files which are truncated.
>> +# It also checks that the extent hints setting fails with non-empty file
>> +# i.e, with any file with allocated extents or delayed allocation. We also
>> +# check if the extsize value and the xflag bit actually got reflected after
>> +# setting/re-setting the extsize value.
>> +
>> +. ./common/config
>> +. ./common/filter
>> +. ./common/preamble
>> +
>> +_begin_fstest ioctl quick
>> +
>> +_fixed_by_kernel_commit "2a492ff66673 \
>> + xfs: Check for delayed allocations before setting \
>> + extsize"
>> +
>> +_require_scratch_extsize
>> +
>> +FILE_DATA_SIZE=1M
>> +
>> +get_default_extsize()
>> +{
>> + if [ -z $1 ] || [ ! -d $1 ]; then
>> + echo "Missing mount point argument for get_default_extsize"
>> + exit 1
>> + fi
>> + $XFS_IO_PROG -c "extsize" "$1" | sed 's/^\[\([0-9]\+\)\].*/\1/'
>> +}
>> +
>> +filter_extsz()
>> +{
>> + sed "s/\[$1\]/\[EXTSIZE\]/g"
>> +}
>> +
>> +setup()
>> +{
>> + _scratch_mkfs >> "$seqres.full" 2>&1
>> + _scratch_mount >> "$seqres.full" 2>&1
>> + BLKSZ=`_get_block_size $SCRATCH_MNT`
>> + DEFAULT_EXTSIZE=`get_default_extsize $SCRATCH_MNT`
>> + EXTSIZE=$(( BLKSZ*2 ))
>> + # Make sure the new extsize is not the same as the default
>> + # extsize so that we can observe it changing
>> + [[ "$DEFAULT_EXTSIZE" -eq "$EXTSIZE" ]] && EXTSIZE=$(( BLKSZ*4 ))
>> +}
>> +
>> +read_file_extsize()
>> +{
>> + $XFS_IO_PROG -c "extsize" $1 | _filter_scratch | filter_extsz $2
>> +}
>> +
>> +check_extsz_and_xflag()
>> +{
>> + local filename=$1
>> + local extsize=$2
>> + read_file_extsize $filename $extsize
>> + _test_fsxattr_xflag $filename "extsize" && echo "e flag set" || \
>> + echo "e flag unset"
>> +}
>> +
>> +check_extsz_xflag_across_remount()
>> +{
>> + local filename=$1
>> + local extsize=$2
>> + _scratch_cycle_mount
>> + check_extsz_and_xflag $filename $extsize
>> +}
>> +
>> +# Extsize flag should be cleared when extsize is reset, so this function
>> +# checks that this behavior is followed.
>> +reset_extsz_and_recheck_extsz_xflag()
>> +{
>> + local filename=$1
>> + echo "Re-setting extsize hint to 0"
>> + $XFS_IO_PROG -c "extsize 0" $filename
>> + check_extsz_xflag_across_remount $filename "0"
>> +}
>> +
>> +check_extsz_xflag_before_and_after_reset()
>> +{
>> + local filename=$1
>> + local extsize=$2
>> + check_extsz_xflag_across_remount $filename $extsize
>> + reset_extsz_and_recheck_extsz_xflag $filename
>> +}
>> +
>> +test_empty_file()
>> +{
>> + echo "TEST: Set extsize on empty file"
>> + local filename=$1
>> + $XFS_IO_PROG \
>> + -c "open -f $filename" \
>> + -c "extsize $EXTSIZE" \
>> +
>> + check_extsz_xflag_before_and_after_reset $filename $EXTSIZE
>> + echo
>> +}
>> +
>> +test_data_delayed()
>> +{
>> + echo "TEST: Set extsize on non-empty file with delayed allocation"
>> + local filename=$1
>> + $XFS_IO_PROG \
>> + -c "open -f $filename" \
>> + -c "pwrite -q 0 $FILE_DATA_SIZE" \
>> + -c "extsize $EXTSIZE" | _filter_scratch
>> +
>> + echo "test for default extsize setting if any"
>> + read_file_extsize $filename $DEFAULT_EXTSIZE
>> + echo
>> +}
>> +
>> +test_data_allocated()
>> +{
>> + echo "TEST: Set extsize on non-empty file with allocated extents"
>> + local filename=$1
>> + $XFS_IO_PROG \
>> + -c "open -f $filename" \
>> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \
>> + -c "extsize $EXTSIZE" | _filter_scratch
>> +
>> + echo "test for default extsize setting if any"
>> + read_file_extsize $filename $DEFAULT_EXTSIZE
>> + echo
>> +}
>> +
>> +test_truncate_allocated()
>> +{
>> + echo "TEST: Set extsize after truncating a file with allocated extents"
>> + local filename=$1
>> + $XFS_IO_PROG \
>> + -c "open -f $filename" \
>> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \
>> + -c "truncate 0" \
>> + -c "extsize $EXTSIZE" \
>> +
>> + check_extsz_xflag_across_remount $filename $EXTSIZE
>> + echo
>> +}
>> +
>> +test_truncate_delayed()
>> +{
>> + echo "TEST: Set extsize after truncating a file with delayed allocation"
>> + local filename=$1
>> + $XFS_IO_PROG \
>> + -c "open -f $filename" \
>> + -c "pwrite -q 0 $FILE_DATA_SIZE" \
>> + -c "truncate 0" \
>> + -c "extsize $EXTSIZE" \
>> +
>> + check_extsz_xflag_across_remount $filename $EXTSIZE
>> + echo
>> +}
>> +
>> +setup
>> +echo -e "EXTSIZE = $EXTSIZE DEFAULT_EXTSIZE = $DEFAULT_EXTSIZE \
>> + BLOCKSIZE = $BLKSZ\n" >> "$seqres.full"
>> +
>> +NEW_FILE_NAME_PREFIX=$SCRATCH_MNT/new-file-
>> +
>> +test_empty_file "$NEW_FILE_NAME_PREFIX"00
>> +test_data_delayed "$NEW_FILE_NAME_PREFIX"01
>> +test_data_allocated "$NEW_FILE_NAME_PREFIX"02
>> +test_truncate_allocated "$NEW_FILE_NAME_PREFIX"03
>> +test_truncate_delayed "$NEW_FILE_NAME_PREFIX"04
>> +
>> +status=0
>> +exit
>> diff --git a/tests/generic/366.out b/tests/generic/366.out
>> new file mode 100644
>> index 00000000..cdd2f5fa
>> --- /dev/null
>> +++ b/tests/generic/366.out
>> @@ -0,0 +1,26 @@
>> +QA output created by 366
>> +TEST: Set extsize on empty file
>> +[EXTSIZE] SCRATCH_MNT/new-file-00
>> +e flag set
>> +Re-setting extsize hint to 0
>> +[EXTSIZE] SCRATCH_MNT/new-file-00
>> +e flag unset
>> +
>> +TEST: Set extsize on non-empty file with delayed allocation
>> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-01: Invalid argument
>> +test for default extsize setting if any
>> +[EXTSIZE] SCRATCH_MNT/new-file-01
>> +
>> +TEST: Set extsize on non-empty file with allocated extents
>> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-02: Invalid argument
>> +test for default extsize setting if any
>> +[EXTSIZE] SCRATCH_MNT/new-file-02
>> +
>> +TEST: Set extsize after truncating a file with allocated extents
>> +[EXTSIZE] SCRATCH_MNT/new-file-03
>> +e flag set
>> +
>> +TEST: Set extsize after truncating a file with delayed allocation
>> +[EXTSIZE] SCRATCH_MNT/new-file-04
>> +e flag set
>> +
>> --
>> 2.43.5
>>
>>
--
---
Nirjhar Roy
Linux Kernel Developer
IBM, Bangalore
Powered by blists - more mailing lists