| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Nov 2022 13:01:56 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: agross@...nel.org
Cc: andersson@...nel.org, konrad.dybcio@...aro.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, jassisinghbrar@...il.com,
srinivas.kandagatla@...aro.org, jic23@...nel.org, lars@...afoo.de,
keescook@...omium.org, tony.luck@...el.com, gpiccoli@...lia.com,
evgreen@...omium.org, gregkh@...uxfoundation.org,
a39.skl@...il.com, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, linux-hardening@...r.kernel.org,
marijn.suijten@...ainline.org, kernel@...labora.com,
luca@...tu.xyz,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: [PATCH v2 11/11] arm64: dts: qcom: Add support for SONY Xperia X/X Compact
This adds support for the Sony Xperia Loire/SmartLoire platform
with a base configuration that is common across all of the
devices that are based on this project.
Also adds a base DT configuration for the Xperia X and Xperia
X Compact (respectively, Suzu and Kugo) which is valid for both
their RoW (single-sim), DSDS (dual-sim) and other regional
variants of these two smartphones, that makes us able to boot
to a UART console.
Please note that, currently, the APC0/1 (cluster 0/1) vregs
are set to a safe voltage in order to ensure boot stability
until a proper solution for CPU DVFS scaling lands.
Co-developed-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@...ainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../qcom/msm8956-sony-xperia-loire-kugo.dts | 35 +++
.../qcom/msm8956-sony-xperia-loire-suzu.dts | 17 ++
.../dts/qcom/msm8956-sony-xperia-loire.dtsi | 282 ++++++++++++++++++
4 files changed, 336 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d534888bcfe5..70ba5cb7d835 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 000000000000..3fb8e23e4330
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@...ainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@...ainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@...ainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+ model = "Sony Xperia X Compact";
+ compatible = "sony,kugo-row", "qcom,msm8956";
+ chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+ status = "okay";
+
+ /* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+ status = "okay";
+
+ /* ST STMVL53L0 ToF @ 29 */
+ /* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 000000000000..87d657f6806b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@...ainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@...ainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@...ainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+ model = "Sony Xperia X";
+ compatible = "sony,suzu-row", "qcom,msm8956";
+ chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 000000000000..67baced639c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@...ainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@...ainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@...ainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+ qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+ qcom,board-id = <8 0>;
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+ serial0 = &blsp2_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ cont-splash@...00000 {
+ reg = <0x0 0x83000000 0x0 0x2800000>;
+ };
+
+ ramoops@...00000 {
+ compatible = "ramoops";
+ reg = <0 0x57f00000 0 0x100000>;
+ record-size = <0x20000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x20000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ };
+ };
+
+ usbphy_1p2: regulator-usbphy-1p2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usbphy-1p2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vph_pwr>;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ /* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&gcc {
+ vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+ status = "okay";
+};
+
+&pm8004_spmi_regulators {
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+
+ /* Cluster 1 supply */
+ pm8004_s2: s2 {
+ /* regulator-min-microvolt = <500000>; */
+ /* Set .95V to prevent unstabilities until CPR for this SoC is done */
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-name = "vdd_apc1";
+ /* Set always on until the CPU PLL is done */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8004_s5: s5 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-name = "vdd_gfx";
+ /* Hack this on until the gpu driver is ready for it */
+ regulator-always-on;
+ };
+};
+
+&pm8950_spmi_regulators {
+ vdd_s5-supply = <&vph_pwr>;
+
+ /* Cluster 0 supply */
+ pm8950_spmi_s5: s5 {
+ /* Set .95V to prevent unstabilities until CPR for this SoC is done */
+ /* regulator-min-microvolt = <790000>; */
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-name = "vdd_apc0";
+ /* Set always on until the CPU PLL is done */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&rpm_requests {
+ pm8950_regulators: regulators {
+ compatible = "qcom,rpm-pm8950-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_l1_l19-supply = <&pm8950_s3>;
+ vdd_l2_l23-supply = <&pm8950_s3>;
+ vdd_l3-supply = <&pm8950_s3>;
+ vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+ pm8950_s1: s1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1162500>;
+ };
+
+ pm8950_s3: s3 {
+ regulator-min-microvolt = <1325000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-always-on;
+ };
+
+ pm8950_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8950_l1: l1 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8950_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8950_l3: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8950_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <290000>;
+ regulator-allow-set-load;
+ };
+
+ pm8950_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-system-load = <130000>;
+ regulator-allow-set-load;
+ };
+
+ pm8950_l9: l9 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2400000>;
+ };
+
+ pm8950_l10: l10 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8950_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <60000>;
+ regulator-allow-set-load;
+ };
+
+ pm8950_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <100000>;
+ regulator-allow-set-load;
+ };
+
+ pm8950_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8950_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l17: l17 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8950_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8950_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ /* Toshiba THGBMHG8C4LBAU7 (032G34) */
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&pm8950_l8>;
+ vqmmc-supply = <&pm8950_l5>;
+ status = "okay";
+};
+
+&sdhc_2 {
+ bus-width = <4>;
+ cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&pm8950_l11>;
+ vqmmc-supply = <&pm8950_l12>;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+ vdd-supply = <&usbphy_1p2>;
+ vdda1p8-supply = <&pm8950_l7>;
+ vdda3p3-supply = <&pm8950_l13>;
+ status = "okay";
+};
--
2.38.1
Powered by blists - more mailing lists