| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 28 Jun 2023 16:57:20 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Mukesh Ojha <quic_mojha@...cinc.com>
Cc: corbet@....net, agross@...nel.org, andersson@...nel.org,
konrad.dybcio@...aro.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, keescook@...omium.org, tony.luck@...el.com,
gpiccoli@...lia.com, mathieu.poirier@...aro.org,
catalin.marinas@....com, will@...nel.org, linus.walleij@...aro.org,
andy.shevchenko@...il.com, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-hardening@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v4 10/21] soc: qcom: Add qcom's pstore minidump driver support
On Wed, Jun 28, 2023 at 6:37 AM Mukesh Ojha <quic_mojha@...cinc.com> wrote:
>
> This driver was inspired from the fact pstore ram region should be
> fixed and boot firmware need to have awarness about this region,
> so that it will be persistent across boot. But, there are many
> QCOM SoC which does not support warm boot from hardware but they
> have minidump support from the software, and for them, there is
> no need of this pstore ram region to be fixed, but at the same
> time have interest in the pstore frontends data. So, this driver
> get the dynamic reserved region from the ram and register the
> ramoops platform device.
>
> +---------+ +---------+ +--------+ +---------+
> | console | | pmsg | | ftrace | | dmesg |
> +---------+ +---------+ +--------+ +---------+
> | | | |
> | | | |
> +------------------------------------------+
> |
> \ /
> +----------------+
> (1) |pstore frontends|
> +----------------+
> |
> \ /
> +------------------- +
> (2) | pstore backend(ram)|
> +--------------------+
> |
> \ /
> +--------------------+
> (3) |qcom_pstore_minidump|
> +--------------------+
> |
> \ /
> +---------------+
> (4) | qcom_minidump |
> +---------------+
>
> This driver will route all the pstore front data to the stored
> in qcom pstore reserved region and the reason of showing an
> arrow from (3) to (4) as qcom_pstore_minidump driver will register
> all the available frontends region with qcom minidump driver
> in upcoming patch.
>
> Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
> ---
> drivers/soc/qcom/Kconfig | 12 +++++
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/qcom_pstore_minidump.c | 85 +++++++++++++++++++++++++++++++++
drivers/soc/ is the dumping ground for things with no other place. As
this is a pstore driver, it belongs with pstore.
> 3 files changed, 98 insertions(+)
> create mode 100644 drivers/soc/qcom/qcom_pstore_minidump.c
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 1834213fd652..fbf08e30feda 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -306,4 +306,16 @@ config QCOM_MINIDUMP_SMEM
>
> This config should be enabled if the low level minidump is implemented
> as part of SMEM.
> +
> +config QCOM_PSTORE_MINIDUMP
> + tristate "Pstore support for QCOM Minidump"
> + depends on ARCH_QCOM
> + depends on PSTORE_RAM
> + depends on QCOM_MINIDUMP
> + help
> + Enablement of this driver ensures that ramoops region can be anywhere
> + reserved in ram instead of being fixed address which needs boot firmware
> + awareness. So, this driver creates plaform device and registers available
> + frontend region with the Qualcomm's minidump driver.
> +
> endmenu
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index 737d868757ac..1ab59c1b364d 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -36,3 +36,4 @@ qcom_ice-objs += ice.o
> obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o
> obj-$(CONFIG_QCOM_MINIDUMP) += qcom_minidump.o
> obj-$(CONFIG_QCOM_MINIDUMP_SMEM) += qcom_minidump_smem.o
> +obj-$(CONFIG_QCOM_PSTORE_MINIDUMP) += qcom_pstore_minidump.o
> diff --git a/drivers/soc/qcom/qcom_pstore_minidump.c b/drivers/soc/qcom/qcom_pstore_minidump.c
> new file mode 100644
> index 000000000000..b07cd10340df
> --- /dev/null
> +++ b/drivers/soc/qcom/qcom_pstore_minidump.c
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_device.h>
You probably don't need this include. Use the actual includes you need
and don't rely on implicit includes (because I'm trying to remove
those).
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/pstore_ram.h>
> +
> +struct qcom_ramoops_dd {
> + struct ramoops_platform_data qcom_ramoops_pdata;
> + struct platform_device *ramoops_pdev;
> +};
> +
> +static int qcom_ramoops_probe(struct platform_device *pdev)
> +{
> + struct device_node *of_node = pdev->dev.of_node;
> + struct qcom_ramoops_dd *qcom_rdd;
> + struct ramoops_platform_data *pdata;
> + struct reserved_mem *rmem;
> + struct device_node *node;
> + long ret;
> +
> + node = of_parse_phandle(of_node, "memory-region", 0);
> + if (!node)
> + return -ENODEV;
> +
> + rmem = of_reserved_mem_lookup(node);
> + of_node_put(node);
> + if (!rmem) {
> + dev_err(&pdev->dev, "failed to locate DT /reserved-memory resource\n");
> + return -EINVAL;
> + }
> +
> + qcom_rdd = devm_kzalloc(&pdev->dev, sizeof(*qcom_rdd), GFP_KERNEL);
> + if (!qcom_rdd)
> + return -ENOMEM;
> +
> + pdata = &qcom_rdd->qcom_ramoops_pdata;
> + pdata->mem_size = rmem->size;
> + pdata->mem_address = rmem->base;
> + ramoops_parse_dt(pdev, pdata);
> +
> + qcom_rdd->ramoops_pdev = platform_device_register_data(NULL, "ramoops", -1,
> + pdata, sizeof(*pdata));
> + if (IS_ERR(qcom_rdd->ramoops_pdev)) {
> + ret = PTR_ERR(qcom_rdd->ramoops_pdev);
> + dev_err(&pdev->dev, "could not create platform device: %ld\n", ret);
> + qcom_rdd->ramoops_pdev = NULL;
> + }
> + platform_set_drvdata(pdev, qcom_rdd);
> +
> + return ret;
> +}
> +
> +static void qcom_ramoops_remove(struct platform_device *pdev)
> +{
> + struct qcom_ramoops_dd *qcom_rdd = platform_get_drvdata(pdev);
> +
> + platform_device_unregister(qcom_rdd->ramoops_pdev);
> + qcom_rdd->ramoops_pdev = NULL;
> +}
> +
> +static const struct of_device_id qcom_ramoops_of_match[] = {
> + { .compatible = "qcom,ramoops"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, qcom_ramoops_of_match);
> +
> +static struct platform_driver qcom_ramoops_drv = {
> + .driver = {
> + .name = "qcom,ramoops",
> + .of_match_table = qcom_ramoops_of_match,
> + },
> + .probe = qcom_ramoops_probe,
> + .remove_new = qcom_ramoops_remove,
> +};
> +
> +module_platform_driver(qcom_ramoops_drv);
> +
> +MODULE_DESCRIPTION("Qualcomm ramoops minidump driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
Powered by blists - more mailing lists