linux-hardening - Re: [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 11 Sep 2023 13:38:53 +0530
From:   Kathiravan Thirumoorthy <quic_kathirav@...cinc.com>
To:     Mukesh Ojha <quic_mojha@...cinc.com>, <corbet@....net>,
        <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <keescook@...omium.org>, <tony.luck@...el.com>,
        <gpiccoli@...lia.com>, <mathieu.poirier@...aro.org>,
        <catalin.marinas@....com>, <will@...nel.org>,
        <linus.walleij@...aro.org>, <andy.shevchenko@...il.com>,
        <vigneshr@...com>, <nm@...com>, <matthias.bgg@...il.com>,
        <kgene@...nel.org>, <alim.akhtar@...sung.com>,
        <bmasney@...hat.com>, <quic_tsoni@...cinc.com>
CC:     <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-hardening@...r.kernel.org>,
        <linux-remoteproc@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-gpio@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <linux-samsung-soc@...r.kernel.org>, <kernel@...cinc.com>
Subject: Re: [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write
 function


On 9/10/2023 1:46 AM, Mukesh Ojha wrote:
> It was realized by Srinivas K. that there is a need of
> read-modify-write scm exported function so that it can
> be used by multiple clients.
>
> Let's introduce qcom_scm_io_update_field() which masks
> out the bits and write the passed value to that
> bit-offset. Subsequent patch will use this function.
>
> Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
> ---


Validated this change on IPQ9574 and IPQ53332 and system is entering 
into the download mode.

Tested-by: Kathiravan Thirumoorthy <quic_kathirav@...cinc.com> # IP9574 
and IPQ5332


>   drivers/firmware/qcom_scm.c            | 20 ++++++++++++++++++++
>   include/linux/firmware/qcom/qcom_scm.h |  2 ++
>   2 files changed, 22 insertions(+)
>
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index fde33acd46b7..5ea8fc4fd4e8 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -78,6 +78,7 @@ static const char * const qcom_scm_convention_names[] = {
>   };
>   
>   static struct qcom_scm *__scm;
> +static DEFINE_SPINLOCK(lock);
>   
>   static int qcom_scm_clk_enable(void)
>   {
> @@ -407,6 +408,25 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
>   }
>   EXPORT_SYMBOL(qcom_scm_set_remote_state);
>   
> +int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
> +{
> +	unsigned int old, new;
> +	int ret;
> +
> +	spin_lock(&lock);
> +	ret = qcom_scm_io_readl(addr, &old);
> +	if (ret)
> +		goto unlock;
> +
> +	new = (old & ~mask) | (val & mask);
> +
> +	ret = qcom_scm_io_writel(addr, new);
> +unlock:
> +	spin_unlock(&lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(qcom_scm_io_update_field);
> +
>   static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>   {
>   	struct qcom_scm_desc desc = {
> diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
> index 250ea4efb7cb..ca41e4eb33ad 100644
> --- a/include/linux/firmware/qcom/qcom_scm.h
> +++ b/include/linux/firmware/qcom/qcom_scm.h
> @@ -84,6 +84,8 @@ extern bool qcom_scm_pas_supported(u32 peripheral);
>   
>   extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>   extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
> +extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
> +				    unsigned int val);
>   
>   extern bool qcom_scm_restore_sec_cfg_available(void);
>   extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);