[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7b14aa01-24c2-425c-8bf3-48e5b7890b95@linux.ibm.com>
Date: Thu, 14 Dec 2023 09:04:41 -0600
From: Ninad Palsule <ninad@...ux.ibm.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, joel@....id.au,
andrew@...econstruct.com.au, peterhuewe@....de, jarkko@...nel.org,
jgg@...pe.ca, keescook@...omium.org, tony.luck@...el.com,
gpiccoli@...lia.com, johannes.holland@...ineon.com, linux@...ck-us.net,
broonie@...nel.org
Cc: patrick.rudolph@...ements.com, vincent@...emblay.dev,
peteryin.openbmc@...il.com, lakshmiy@...ibm.com, bhelgaas@...gle.com,
naresh.solanki@...ements.com, alexander.stein@...tq-group.com,
festevam@...x.de, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org, linux-integrity@...r.kernel.org,
linux-hardening@...r.kernel.org, geissonator@...oo.com
Subject: Re: [PATCH v1 8/8] ARM: dts: aspeed: System1: PS, sensor and more
Hello Krzysztof,
On 12/12/23 14:26, Krzysztof Kozlowski wrote:
> On 12/12/2023 17:40, Ninad Palsule wrote:
>> This drop adds following devices in the device tree.
>> - EEPROM/VPD
>> - Power supplies
>> - Humidity, pressure and temperature sensors.
>> - Trusted platform module(TPM) chip
>>
>> Tested:
>> This board is tested using the simics simulator.
>>
>> Signed-off-by: Ninad Palsule <ninad@...ux.ibm.com>
>> ---
> Don't mix DTS with drivers. DTS and drivers go via different subsystems
> and cannot have dependencies, so why DTS is patch #6, then driver #7 and
> now again DTS #7?
I have sent a driver patch as a separate patchset and removed it from
this patchset.
>
>
>> .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 76 +++++++++++++++++++
>> 1 file changed, 76 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> index 75562aa63701..d960b938fe8d 100644
>> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> @@ -461,6 +461,11 @@ &kcs3 {
>> &i2c0 {
>> status = "okay";
>>
>> + eeprom@50 {
>> + compatible = "atmel,24c64";
>> + reg = <0x50>;
>> + };
>> +
>> regulator@60 {
>> compatible = "maxim,max8952";
>> reg = <0x60>;
>> @@ -655,6 +660,25 @@ pca0: pca9539@74 {
>>
>> &i2c2 {
>> status = "okay";
>> +
>> + power-supply@58 {
>> + compatible = "ibm,cffps";
>> + reg = <0x58>;
>> + };
>> +
>> + power-supply@59 {
>> + compatible = "ibm,cffps";
>> + reg = <0x59>;
>> + };
>> +
>> + power-supply@5a {
>> + compatible = "ibm,cffps";
>> + reg = <0x5a>;
>> + };
> Missing blank line
Fixed it.
Thanks for the review.
Regards,
Ninad
>
>> + power-supply@5b {
>> + compatible = "ibm,cffps";
>> + reg = <0x5b>;
>> + };
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists