linux-hardening - Re: [PATCH] [RFC] iio: pressure: dlhl60d: Check mask

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <202402230912.50332AF1@keescook>
Date: Fri, 23 Feb 2024 09:14:53 -0800
From: Kees Cook <keescook@...omium.org>
To: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Cc: Jonathan Cameron <jic23@...nel.org>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	Nuno Sá <nuno.sa@...log.com>,
	linux-iio@...r.kernel.org, Nathan Chancellor <nathan@...nel.org>,
	Nick Desaulniers <ndesaulniers@...gle.com>,
	Bill Wendling <morbo@...gle.com>,
	Justin Stitt <justinstitt@...gle.com>, linux-kernel@...r.kernel.org,
	llvm@...ts.linux.dev, linux-hardening@...r.kernel.org
Subject: Re: [PATCH] [RFC] iio: pressure: dlhl60d: Check mask_width for IRQs

On Fri, Feb 23, 2024 at 05:09:18PM +0000, Jonathan Cameron wrote:
> On Thu, 22 Feb 2024 14:23:39 -0800
> Kees Cook <keescook@...omium.org> wrote:
> 
> > Clang tripped over a FORTIFY warning in this code, and while it seems it
> > may be a false positive in Clang due to loop unwinding, the code in
> > question seems to make a lot of assumptions. 
> 
> Hi Kees,
> 
> The assumptions are mostly characteristics of how the IIO buffers work
> with the scan masks defined based on indexes in the driver provided
> struct iio_chan_spec arrays.
> 
> This driver is doing more work than it should need to as we long ago
> moved some of the more fiddly handling into the IIO core.
> 
> > Comments added, and the
> > Clang warning[1] has been worked around by growing the array size.
> > Also there was an uninitialized 4th byte in the __be32 array that was
> > being sent through to iio_push_to_buffers().
> 
> That is indeed not good - the buffer should have been zero initialized.

Okay, I'll get this respun and include the fix.

> 
> > 
> > Link: https://github.com/ClangBuiltLinux/linux/issues/2000 [1]
> > Signed-off-by: Kees Cook <keescook@...omium.org>
> > ---
> > Cc: Jonathan Cameron <jic23@...nel.org>
> > Cc: Lars-Peter Clausen <lars@...afoo.de>
> > Cc: "Uwe Kleine-König" <u.kleine-koenig@...gutronix.de>
> > Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> > Cc: "Nuno Sá" <nuno.sa@...log.com>
> > Cc: linux-iio@...r.kernel.org
> > ---
> >  drivers/iio/pressure/dlhl60d.c | 11 +++++++++--
> >  1 file changed, 9 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
> > index 28c8269ba65d..9bbecd0bfe88 100644
> > --- a/drivers/iio/pressure/dlhl60d.c
> > +++ b/drivers/iio/pressure/dlhl60d.c
> > @@ -250,20 +250,27 @@ static irqreturn_t dlh_trigger_handler(int irq, void *private)
> >  	struct dlh_state *st = iio_priv(indio_dev);
> >  	int ret;
> >  	unsigned int chn, i = 0;
> > -	__be32 tmp_buf[2];
> > +	/* This was only an array pair of 4 bytes. */
> 
> True, which is the right size as far as I can tell.
> If we need this to suppress a warning then comment should say that.

Okay. I think I'll leave it as 2 and manually "unroll" the loop.

> 
> > +	__be32 tmp_buf[4] = { };
> >  
> >  	ret = dlh_start_capture_and_read(st);
> >  	if (ret)
> >  		goto out;
> >  
> > +	/* Nothing was checking masklength vs ARRAY_SIZE(tmp_buf)? */
> 
> Not needed but no way a compiler could know that.
> 
> > +	if (WARN_ON_ONCE(indio_dev->masklength > ARRAY_SIZE(tmp_buf)))
> > +		goto out;
> > +
> >  	for_each_set_bit(chn, indio_dev->active_scan_mask,
> 
> This is all a bit pointless if not 'wrong' other than the
> 4th byte uninitialized part.  The limit can be hard coded as 2 as
> that's a characteristic of this driver.
> 
> For device that always read a particular set of channels they
> should provide indio_dev->available_scan_masks = { BIT(1) | BIT(0), 0 };
> and then always push all the data making this always
> 
> 	memcpy(&tmp_buf[0], &st->rx_buf[1], 3);
> 	mempcy(&tmp_buf[1], &st->rx_buf[1] + 3, 3);

Okay, so this could be unrolled manually to check just for bits 0 and 1?

> 
> The buffer demux code in the IIO core will deal with repacking the data
> if only one channel is enabled.
> 
> >  		indio_dev->masklength) {
> > -		memcpy(tmp_buf + i,
> > +		/* This is copying 3 bytes. What about the 4th? */
> > +		memcpy(&tmp_buf[i],
> >  			&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
> >  			DLH_NUM_DATA_BYTES);
> >  		i++;
> >  	}
> >  
> > +	/* How do we know the iio buffer_list has only 2 items? */
> 
> Can only include items from the channels array at indexes up to the max
> scan_index in there, so 0 and 1 in this case (1 might not be present if only
> one channel is enabled). Sizes (and alignment) are given by storagebits so
> 4 bytes for each.

This code pattern seems repeated through all of iio, so I guess we'll
leave it as-is. It seems like it'd be nice to have a "length" argument
to iio_push_to_buffers(), just to sanity check, but that would need to
be a pretty large patch. :P

> 
> >  	iio_push_to_buffers(indio_dev, tmp_buf);
> >  
> >  out:

Thanks for looking at this!

-Kees

-- 
Kees Cook