Message-ID: <20240612073049.xof3ciae2x5qjp6a@master>
Date: Wed, 12 Jun 2024 07:30:49 +0000
From: Wei Yang <richard.weiyang@...il.com>
To: Steven Rostedt <rostedt@...dmis.org>
Cc: linux-kernel@...r.kernel.org, linux-trace-kernel@...r.kernel.org,
	Masami Hiramatsu <mhiramat@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	"Liam R. Howlett" <Liam.Howlett@...cle.com>,
	Vlastimil Babka <vbabka@...e.cz>,
	Lorenzo Stoakes <lstoakes@...il.com>, linux-mm@...ck.org,
	Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
	Dave Hansen <dave.hansen@...ux.intel.com>, x86@...nel.org,
	"H. Peter Anvin" <hpa@...or.com>,
	Peter Zijlstra <peterz@...radead.org>,
	Kees Cook <keescook@...omium.org>, Tony Luck <tony.luck@...el.com>,
	"Guilherme G. Piccoli" <gpiccoli@...lia.com>,
	linux-hardening@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>,
	Ross Zwisler <zwisler@...gle.com>, wklin@...gle.com,
	Vineeth Remanan Pillai <vineeth@...byteword.org>,
	Joel Fernandes <joel@...lfernandes.org>,
	Suleiman Souhlal <suleiman@...gle.com>,
	Linus Torvalds <torvalds@...uxfoundation.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>, Ard Biesheuvel <ardb@...nel.org>,
	Mike Rapoport <rppt@...nel.org>
Subject: Re: [PATCH v2 1/2] mm/memblock: Add "reserve_mem" to reserved named
 memory at boot up

On Thu, Jun 06, 2024 at 11:01:44AM -0400, Steven Rostedt wrote:
>From: "Steven Rostedt (Google)" <rostedt@...dmis.org>
>
>In order to allow for requesting a memory region that can be used for
>things like pstore on multiple machines where the memory layout is not the
>same, add a new option to the kernel command line called "reserve_mem".
>
>The format is:  reserve_mem=nn:align:name
>
>Where it will find nn amount of memory at the given alignment of align.
>The name field is to allow another subsystem to retrieve where the memory
>was found. For example:
>
>  reserve_mem=12M:4096:oops ramoops.mem_name=oops
>
>Where ramoops.mem_name will tell ramoops that memory was reserved for it
>via the reserve_mem option and it can find it by calling:
>
>  if (reserve_mem_find_by_name("oops", &start, &size)) {
>	// start holds the start address and size holds the size given
>
>This is typically used for systems that do not wipe the RAM, and this
>command line will try to reserve the same physical memory on soft reboots.
>Note, it is not guaranteed to be the same location. For example, if KASLR
>places the kernel at the location of where the RAM reservation was from a
>previous boot, the new reservation will be at a different location.  Any
>subsystem using this feature must add a way to verify that the contents of
>the physical memory is from a previous boot, as there may be cases where
>the memory will not be located at the same location.
>
>Not all systems may work either. There could be bit flips if the reboot
>goes through the BIOS. Using kexec to reboot the machine is likely to
>have better results in such cases.
>
>Link: https://lore.kernel.org/all/ZjJVnZUX3NZiGW6q@kernel.org/
>
>Suggested-by: Mike Rapoport <rppt@...nel.org>
>Signed-off-by: Steven Rostedt (Google) <rostedt@...dmis.org>
>---
> .../admin-guide/kernel-parameters.txt         | 20 ++++
> include/linux/mm.h                            |  2 +
> mm/memblock.c                                 | 97 +++++++++++++++++++
> 3 files changed, 119 insertions(+)
>
>diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>index b600df82669d..4b2f7fb8de66 100644
>--- a/Documentation/admin-guide/kernel-parameters.txt
>+++ b/Documentation/admin-guide/kernel-parameters.txt
>@@ -5710,6 +5710,26 @@
> 			them.  If <base> is less than 0x10000, the region
> 			is assumed to be I/O ports; otherwise it is memory.
> 
>+	reserve_mem=	[RAM]
>+			Format: nn[KNG]:<align>:<label>
>+			Reserve physical memory and label it with a name that
>+			other subsystems can use to access it. This is typically
>+			used for systems that do not wipe the RAM, and this command
>+			line will try to reserve the same physical memory on
>+			soft reboots. Note, it is not guaranteed to be the same
>+			location. For example, if KASLR places the kernel at the
>+			location of where the RAM reservation was from a previous
>+			boot, the new reservation will be at a different location.
>+			Any subsystem using this feature must add a way to verify
>+			that the contents of the physical memory is from a previous
>+			boot, as there may be cases where the memory will not be
>+			located at the same location.
>+
>+			The format is size:align:label for example, to request
>+			12 megabytes of 4096 alignment for ramoops:
>+
>+			reserver_mem=12M:4096:oops ramoops.mem_name=oops
>+
> 	reservetop=	[X86-32,EARLY]
> 			Format: nn[KMG]
> 			Reserves a hole at the top of the kernel virtual
>diff --git a/include/linux/mm.h b/include/linux/mm.h
>index 9849dfda44d4..b4455cc02f2c 100644
>--- a/include/linux/mm.h
>+++ b/include/linux/mm.h
>@@ -4263,4 +4263,6 @@ static inline bool pfn_is_unaccepted_memory(unsigned long pfn)
> void vma_pgtable_walk_begin(struct vm_area_struct *vma);
> void vma_pgtable_walk_end(struct vm_area_struct *vma);
> 
>+int reserve_mem_find_by_name(const char *name, unsigned long *start, unsigned long *size);
>+
> #endif /* _LINUX_MM_H */
>diff --git a/mm/memblock.c b/mm/memblock.c
>index d09136e040d3..a8bf0ee9e2b4 100644
>--- a/mm/memblock.c
>+++ b/mm/memblock.c
>@@ -2244,6 +2244,103 @@ void __init memblock_free_all(void)
> 	totalram_pages_add(pages);
> }
> 
>+/* Keep a table to reserve named memory */
>+#define RESERVE_MEM_MAX_ENTRIES		8
>+#define RESERVE_MEM_NAME_SIZE		16
>+struct reserve_mem_table {
>+	char			name[RESERVE_MEM_NAME_SIZE];
>+	unsigned long		start;
>+	unsigned long		size;
>+};
>+static struct reserve_mem_table reserved_mem_table[RESERVE_MEM_MAX_ENTRIES];
>+static int reserved_mem_count;
>+
>+/* Add wildcard region with a lookup name */
>+static int __init reserved_mem_add(unsigned long start, unsigned long size,
>+				   const char *name)
>+{
>+	struct reserve_mem_table *map;
>+
>+	if (!name || !name[0] || strlen(name) >= RESERVE_MEM_NAME_SIZE)
>+		return -EINVAL;
>+
>+	if (reserved_mem_count >= RESERVE_MEM_MAX_ENTRIES)
>+		return -1;

Another thing come to my mind: could we specify several reserve_mem on the
command line?

If so, we may need to check whether names conflict.

>+
>+	map = &reserved_mem_table[reserved_mem_count++];
>+	map->start = start;
>+	map->size = size;
>+	strscpy(map->name, name);
>+	return 0;
>+}
>+
>+/**
>+ * reserve_mem_find_by_name - Find reserved memory region with a given name
>+ * @name: The name that is attached to a reserved memory region
>+ * @start: If found, holds the start address
>+ * @size: If found, holds the size of the address.
>+ *
>+ * Returns: 1 if found or 0 if not found.
>+ */
>+int reserve_mem_find_by_name(const char *name, unsigned long *start, unsigned long *size)
>+{
>+	struct reserve_mem_table *map;
>+	int i;
>+
>+	for (i = 0; i < reserved_mem_count; i++) {
>+		map = &reserved_mem_table[i];
>+		if (!map->size)
>+			continue;
>+		if (strcmp(name, map->name) == 0) {
>+			*start = map->start;
>+			*size = map->size;
>+			return 1;
>+		}
>+	}
>+	return 0;
>+}
>+
>+/*
>+ * Parse early_reserve_mem=nn:align:name
>+ */
>+static int __init reserve_mem(char *p)
>+{
>+	phys_addr_t start, size, align;
>+	char *oldp;
>+	int err;
>+
>+	if (!p)
>+		return -EINVAL;
>+
>+	oldp = p;
>+	size = memparse(p, &p);
>+	if (p == oldp)
>+		return -EINVAL;
>+
>+	if (*p != ':')
>+		return -EINVAL;
>+
>+	align = memparse(p+1, &p);
>+	if (*p != ':')
>+		return -EINVAL;
>+
>+	start = memblock_phys_alloc(size, align);
>+	if (!start)
>+		return -ENOMEM;
>+
>+	p++;
>+	err = reserved_mem_add(start, size, p);
>+	if (err) {
>+		memblock_phys_free(start, size);
>+		return err;
>+	}
>+
>+	p += strlen(p);
>+
>+	return *p == '\0' ? 0: -EINVAL;
>+}
>+__setup("reserve_mem=", reserve_mem);
>+
> #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_ARCH_KEEP_MEMBLOCK)
> static const char * const flagname[] = {
> 	[ilog2(MEMBLOCK_HOTPLUG)] = "HOTPLUG",
>-- 
>2.43.0
>
>

-- 
Wei Yang
Help you, Help me

Powered by blists - more mailing lists