lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240616-sy7802-v4-0-789994180e05@apitzsch.eu>
Date: Sun, 16 Jun 2024 20:22:51 +0200
From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@...nel.org>
To: Pavel Machek <pavel@....cz>, Lee Jones <lee@...nel.org>, 
 Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 "Gustavo A. R. Silva" <gustavoars@...nel.org>, 
 Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, 
 Christophe JAILLET <christophe.jaillet@...adoo.fr>, 
 Trilok Soni <quic_tsoni@...cinc.com>, Kees Cook <kees@...nel.org>
Cc: linux-leds@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-hardening@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht, 
 phone-devel@...r.kernel.org, 
 André Apitzsch <git@...tzsch.eu>
Subject: [PATCH v4 0/3] Add sy7802 flash led driver

This series introduces a driver for the Silergy SY7802 charge pump used
in the BQ Aquaris M5 and X5 smartphones.

The implementation is based on information extracted from downstream as
the datasheet provided by a distributor of the hardware didn't include
any information about the i2c register description.

Signed-off-by: André Apitzsch <git@...tzsch.eu>
---
Changes in v4:
- Use for_each_available_child_of_node_scoped() to simplify code
- Use dev_err_probe() to be consistent with the other code in
  sy7802_probe()
- Split devm_add_action() into 2 devm_add_action_or_reset() to simplify
  code and balance regulator_enable()
- Link to v3: https://lore.kernel.org/r/20240612-sy7802-v3-0-1e9cc1c79b79@apitzsch.eu

Changes in v3:
- Add R-b tag to first patch
- Extend driver commit message
- Improve readability of defines by using BIT()
- Rename some variables/parameters
  * led_no -> led_id
  * level -> brightness
  * curr -> fled_{strobe,torch}_used_tmp
  * mask -> {flash,torch}_mask
  * i -> child_num
- Restructure structs ("Place th big stuff at the top")
- Declare 'child' on a separate line
- Move multi-line assignments out of declaration block
- Update warning/error messages and comments
- Use gotos to handle error path
- Use devm API to cleanup module's resources
- Init mutex before LED class device is registered to avoid race
  condition
- Link to v2: https://lore.kernel.org/r/20240401-sy7802-v2-0-1138190a7448@apitzsch.eu

Changes in v2:
- bindings: remove unneeded allOf
- bindings: example: move flash-led-controller under i2c node to fix
  check error
- Cc to phone-devel
- Link to v1: https://lore.kernel.org/r/20240327-sy7802-v1-0-db74ab32faaf@apitzsch.eu

---
André Apitzsch (3):
      dt-bindings: leds: Add Silergy SY7802 flash LED
      leds: sy7802: Add support for Silergy SY7802 flash LED controller
      arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash

 .../devicetree/bindings/leds/silergy,sy7802.yaml   | 100 ++++
 .../boot/dts/qcom/msm8939-longcheer-l9100.dts      |  26 +
 drivers/leds/flash/Kconfig                         |  11 +
 drivers/leds/flash/Makefile                        |   1 +
 drivers/leds/flash/leds-sy7802.c                   | 542 +++++++++++++++++++++
 5 files changed, 680 insertions(+)
---
base-commit: 6a03b35e4395eb2d6e89a38aca00a9fe9cb39ba1
change-id: 20240325-sy7802-f40fc6f56525

Best regards,
-- 
André Apitzsch <git@...tzsch.eu>



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ