linux-hardening - Re: [PATCH v5 08/27] cxl/mem: Read dynamic capacity configuration from the device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241030140535.000009ca@Huawei.com>
Date: Wed, 30 Oct 2024 14:05:35 +0000
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: <ira.weiny@...el.com>
CC: Dave Jiang <dave.jiang@...el.com>, Fan Ni <fan.ni@...sung.com>, "Navneet
 Singh" <navneet.singh@...el.com>, Jonathan Corbet <corbet@....net>, "Andrew
 Morton" <akpm@...ux-foundation.org>, Dan Williams <dan.j.williams@...el.com>,
	Davidlohr Bueso <dave@...olabs.net>, "Alison Schofield"
	<alison.schofield@...el.com>, Vishal Verma <vishal.l.verma@...el.com>,
	<linux-cxl@...r.kernel.org>, <linux-doc@...r.kernel.org>,
	<nvdimm@...ts.linux.dev>, <linux-kernel@...r.kernel.org>, Kees Cook
	<kees@...nel.org>, "Gustavo A. R. Silva" <gustavoars@...nel.org>,
	<linux-hardening@...r.kernel.org>
Subject: Re: [PATCH v5 08/27] cxl/mem: Read dynamic capacity configuration
 from the device

On Tue, 29 Oct 2024 15:34:43 -0500
ira.weiny@...el.com wrote:

> From: Navneet Singh <navneet.singh@...el.com>
> 
> Devices which optionally support Dynamic Capacity (DC) are configured
> via mailbox commands.  CXL 3.1 requires the host to issue the Get DC
> Configuration command in order to properly configure DCDs.  Without the
> Get DC Configuration command DCD can't be supported.
> 
> Implement the DC mailbox commands as specified in CXL 3.1 section
> 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration
> information.  Disable DCD if DCD is not supported.  Leverage the Get DC
> Configuration command supported bit to indicate if DCD is supported.
> 
> Linux has no use for the trailing fields of the Get Dynamic Capacity
> Configuration Output Payload (Total number of supported extents, number
> of available extents, total number of supported tags, and number of
> available tags).  Avoid defining those fields to use the more useful
> dynamic C array.
> 
> Cc: Li, Ming <ming4.li@...el.com>
> Cc: Kees Cook <kees@...nel.org>
> Cc: Gustavo A. R. Silva <gustavoars@...nel.org>
> Cc: linux-hardening@...r.kernel.org
> Signed-off-by: Navneet Singh <navneet.singh@...el.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
I'll assume you'll fix the typo the bot found.

> +
> +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */
> +struct cxl_mbox_get_dc_config_out {
> +	u8 avail_region_count;
> +	u8 regions_returned;
> +	u8 rsvd[6];
> +	/* See CXL 3.1 Table 8-165 */
> +	struct cxl_dc_region_config {
> +		__le64 region_base;
> +		__le64 region_decode_length;
> +		__le64 region_length;
> +		__le64 region_block_size;
> +		__le32 region_dsmad_handle;
> +		u8 flags;
> +		u8 rsvd[3];
> +	} __packed region[] __counted_by(regions_retunred);
returned

> +	/* Trailing fields unused */
> +} __packed;