[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250416180440.231949-4-smostafa@google.com>
Date: Wed, 16 Apr 2025 18:04:33 +0000
From: Mostafa Saleh <smostafa@...gle.com>
To: kvmarm@...ts.linux.dev, kasan-dev@...glegroups.com,
linux-hardening@...r.kernel.org, linux-kbuild@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: will@...nel.org, maz@...nel.org, oliver.upton@...ux.dev,
broonie@...nel.org, catalin.marinas@....com, tglx@...utronix.de,
mingo@...hat.com, bp@...en8.de, dave.hansen@...ux.intel.com, x86@...nel.org,
hpa@...or.com, kees@...nel.org, elver@...gle.com, andreyknvl@...il.com,
ryabinin.a.a@...il.com, akpm@...ux-foundation.org, yuzenghui@...wei.com,
suzuki.poulose@....com, joey.gouly@....com, masahiroy@...nel.org,
nathan@...nel.org, nicolas.schier@...ux.dev,
Mostafa Saleh <smostafa@...gle.com>
Subject: [PATCH 3/4] KVM: arm64: Introduce CONFIG_UBSAN_KVM_EL2
Add a new Kconfig CONFIG_UBSAN_KVM_EL2 for KVM which enables
UBSAN for EL2 code (in protected/nvhe/hvhe) modes.
This will re-use the same checks enabled for the kernel for
the hypervisor. The only difference is that for EL2 it always
emits a "brk" instead of implementing hooks as the hypervisor
can't print reports.
The KVM code will re-use the same code for the kernel
"report_ubsan_failure()" so #ifdefs are changed to also have this
code for CONFIG_UBSAN_KVM_EL2
Signed-off-by: Mostafa Saleh <smostafa@...gle.com>
---
arch/arm64/kvm/hyp/nvhe/Makefile | 6 ++++++
include/linux/ubsan.h | 2 +-
lib/Kconfig.ubsan | 9 +++++++++
lib/ubsan.c | 6 ++++--
scripts/Makefile.ubsan | 5 ++++-
5 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index b43426a493df..cbe7e12752bc 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -99,3 +99,9 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS), $(KBUILD_CFLAG
# causes a build failure. Remove profile optimization flags.
KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
+
+ifeq ($(CONFIG_UBSAN_KVM_EL2),y)
+UBSAN_SANITIZE := y
+# Always use brk and not hooks
+ccflags-y += $(CFLAGS_UBSAN_FOR_TRAP)
+endif
diff --git a/include/linux/ubsan.h b/include/linux/ubsan.h
index c843816f5f68..3ab8d38aedb8 100644
--- a/include/linux/ubsan.h
+++ b/include/linux/ubsan.h
@@ -2,7 +2,7 @@
#ifndef _LINUX_UBSAN_H
#define _LINUX_UBSAN_H
-#ifdef CONFIG_UBSAN_TRAP
+#if defined(CONFIG_UBSAN_TRAP) || defined(CONFIG_UBSAN_KVM_EL2)
const char *report_ubsan_failure(u32 check_type);
#else
static inline const char *report_ubsan_failure(u32 check_type)
diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan
index 4216b3a4ff21..3878858eb473 100644
--- a/lib/Kconfig.ubsan
+++ b/lib/Kconfig.ubsan
@@ -166,4 +166,13 @@ config TEST_UBSAN
This is a test module for UBSAN.
It triggers various undefined behavior, and detect it.
+config UBSAN_KVM_EL2
+ bool "UBSAN for KVM code at EL2"
+ depends on ARM64
+ help
+ Enable UBSAN when running on ARM64 with KVM in a split mode
+ (nvhe/hvhe/protected) for the hypervisor code running in EL2.
+ In this mode, any UBSAN violation in EL2 would panic the kernel
+ and information similar to UBSAN_TRAP would be printed.
+
endif # if UBSAN
diff --git a/lib/ubsan.c b/lib/ubsan.c
index 17993727fc96..a6ca235dd714 100644
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -19,7 +19,7 @@
#include "ubsan.h"
-#ifdef CONFIG_UBSAN_TRAP
+#if defined(CONFIG_UBSAN_TRAP) || defined(CONFIG_UBSAN_KVM_EL2)
/*
* Only include matches for UBSAN checks that are actually compiled in.
* The mappings of struct SanitizerKind (the -fsanitize=xxx args) to
@@ -97,7 +97,9 @@ const char *report_ubsan_failure(u32 check_type)
}
}
-#else
+#endif
+
+#ifndef CONFIG_UBSAN_TRAP
static const char * const type_check_kinds[] = {
"load of",
"store to",
diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan
index 9e35198edbf0..68af6830af0f 100644
--- a/scripts/Makefile.ubsan
+++ b/scripts/Makefile.ubsan
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
+#Shared with KVM/arm64
+export CFLAGS_UBSAN_FOR_TRAP := $(call cc-option,-fsanitize-trap=undefined,-fsanitize-undefined-trap-on-error)
+
# Enable available and selected UBSAN features.
ubsan-cflags-$(CONFIG_UBSAN_ALIGNMENT) += -fsanitize=alignment
ubsan-cflags-$(CONFIG_UBSAN_BOUNDS_STRICT) += -fsanitize=bounds-strict
@@ -10,7 +13,7 @@ ubsan-cflags-$(CONFIG_UBSAN_DIV_ZERO) += -fsanitize=integer-divide-by-zero
ubsan-cflags-$(CONFIG_UBSAN_UNREACHABLE) += -fsanitize=unreachable
ubsan-cflags-$(CONFIG_UBSAN_BOOL) += -fsanitize=bool
ubsan-cflags-$(CONFIG_UBSAN_ENUM) += -fsanitize=enum
-ubsan-cflags-$(CONFIG_UBSAN_TRAP) += $(call cc-option,-fsanitize-trap=undefined,-fsanitize-undefined-trap-on-error)
+ubsan-cflags-$(CONFIG_UBSAN_TRAP) += $(CFLAGS_UBSAN_FOR_TRAP)
export CFLAGS_UBSAN := $(ubsan-cflags-y)
--
2.49.0.604.gff1f9ca942-goog
Powered by blists - more mailing lists