lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <daf58379-ea55-468d-9174-8a04677550e2@kernel.org>
Date: Thu, 15 May 2025 13:11:54 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Yulin Lu <luyulin@...incomputing.com>, linus.walleij@...aro.org,
 robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
 linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, kees@...nel.org, gustavoars@...nel.org,
 brgl@...ev.pl, linux-hardening@...r.kernel.org
Cc: ningyu@...incomputing.com, zhengyu@...incomputing.com,
 linmin@...incomputing.com, huangyifeng@...incomputing.com,
 fenglin@...incomputing.com, lianghujun@...incomputing.com
Subject: Re: [PATCH v4 0/2] ESWIN EIC7700 pinctrl driver

On 15/05/2025 07:45, Yulin Lu wrote:
>   Implements support for the Eswin eic7700 SoC pinctrl controller.
>   Provides API to manage pinctrl for the eic7700 SoC.
>   Integration with the Linux pinctrl subsystem for consistency and
>   scalability.
> 
>   Supported chips:
>     Eswin eic7700 SoC.
> 
>   Test:
>     Tested this patch on the Sifive HiFive Premier P550 (which uses
>     the EIC7700 SoC), including system boot, networking, EMMC, display,
>     and other peripherals. The drivers for these modules all use the
>     pinctrl module, so this verifies that this pinctrl driver
>     patch is working properly.
> 
> ---
> Changes since V3:
> - Added "Reviewed-by" tag of "Krzysztof Kozlowski"
> - Corrected some incorrect spaces and blank lines in the YAML file.
> - Link: https://lore.kernel.org/all/20250514080928.385-1-luyulin@eswincomputing.com/

Start using b4 so you will not introduce such errors like here.

Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ