linux-hardening - [PATCH v3 0/4] i3c: add support for the Renesas controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250722153445.5003-1-wsa+renesas@sang-engineering.com>
Date: Tue, 22 Jul 2025 17:34:38 +0200
From: Wolfram Sang <wsa+renesas@...g-engineering.com>
To: linux-renesas-soc@...r.kernel.org
Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>,
	Alexandre Belloni <alexandre.belloni@...tlin.com>,
	Conor Dooley <conor+dt@...nel.org>,
	devicetree@...r.kernel.org,
	Frank Li <Frank.Li@....com>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	"Gustavo A. R. Silva" <gustavoars@...nel.org>,
	Kees Cook <kees@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	linux-hardening@...r.kernel.org,
	linux-i3c@...ts.infradead.org,
	Magnus Damm <magnus.damm@...il.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Rob Herring <robh@...nel.org>,
	Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
Subject: [PATCH v3 0/4] i3c: add support for the Renesas controller

Conceptual change since v2:
* improve and add more parameters from the spec to master.h
  (new patches 1+2)

Detailed changes since v2 are described in the individual patches. A
branch with enablement patches for RZ/G3S+G3E can be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/g3s/i3c

Old coverletter:

Here is a basic driver for the I3C IP found in various Renesas SoCs like
RZ/G3S and G3E. Missing features to be added incrementally are IBI,
HotJoin and maybe target support. Other than that, this driver has been
tested with I3C pure busses (2 targets) and mixed busses (2 I3C +
various I2C targets). DAA and reading/writing to the temperature sensors
worked reliably at different speeds. Scoping the bus, the output from
the protocol analyzer seems reasonable, too. It was created by merging
two versions of it from two different BSPs. Then, improved according to
code analyzers, cleaned up with regard to coding style, and then
refactored to hopefully match I3C subsystem standards.

Looking forward to comments,

   Wolfram

Tommaso Merciai (1):
  dt-bindings: i3c: Add Renesas I3C controller

Wolfram Sang (3):
  i3c: Harmonize defines representing specification parameters
  i3c: Add more parameters for controllers to the header
  i3c: master: Add basic driver for the Renesas I3C controller

 .../devicetree/bindings/i3c/renesas,i3c.yaml  |  179 +++
 MAINTAINERS                                   |    7 +
 drivers/i3c/master.c                          |   12 +-
 drivers/i3c/master/Kconfig                    |   10 +
 drivers/i3c/master/Makefile                   |    1 +
 drivers/i3c/master/dw-i3c-master.c            |    4 +-
 drivers/i3c/master/renesas-i3c.c              | 1404 +++++++++++++++++
 include/linux/i3c/master.h                    |   16 +-
 8 files changed, 1621 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
 create mode 100644 drivers/i3c/master/renesas-i3c.c

-- 
2.47.2