| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20060714093014.2a6e68ff.akpm@osdl.org>
Date: Fri, 14 Jul 2006 09:30:14 -0700
From: Andrew Morton <akpm@...l.org>
To: "Andy Chittenden" <AChittenden@...earc.com>
Cc: linux-kernel@...r.kernel.org,
linux-usb-devel@...ts.sourceforge.net,
Alan Stern <stern@...land.harvard.edu>,
David Brownell <david-b@...bell.net>, Greg KH <greg@...ah.com>
Subject: Re: 2.6.17 hangs during boot on ASUS M2NPV-VM motherboard
On Fri, 14 Jul 2006 16:54:25 +0100
"Andy Chittenden" <AChittenden@...earc.com> wrote:
>
>
> > > On Thu, 13 Jul 2006 08:56:01 +0100
> > > "Andy Chittenden" <AChittenden@...earc.com> wrote:
> > >
> > > > > On Wed, 12 Jul 2006 08:58:52 +0100
> > > > > "Andy Chittenden" <AChittenden@...earc.com> wrote:
> > > > >
> > > > > > I tried to install the linux-image-2.6.17-1-amd64-k8-smp
> > > > > debian package
> > > > > > on a ASUS M2NPV-VM motherboard based system and it hung
> > > > > during boot. The
> > > > > > last message on the console was:
> > > > > >
> > > > > > io scheduler cfq registered
> > > > >
> > > > > Suggest you add initcall_debug to the kernel boot command
> > > > > line. That'll
> > > > > tell us which initcall got stuck.
> > > >
> > > > I was only able to scrounge 5 minutes on this system this morning.
> > > > Here's the last few messages output with initcall_debug on:
> > > >
> > > > Calling initcall .... init+0x0/0xc()
> > > > Calling initcall .... noop_init+0x0/0xc()
> > > > io scheduler noop registered
> > > > Calling initcall .... as_init+0x0/0x4f()
> > > > io scheduler anticipatory registered (default)
> > > > Calling initcall .... deadline_init+0x0/0x4f()
> > > > io scheduler deadline registered
> > > > Calling initcall .... cfq_init+0x0/0xcc()
> > > > io scheduler cfq registered
> > > > Calling initcall .... pci_init+0x0/0x2b()
> > > >
> > > > What other info can I grab? (Although I have to fit in with that
> > > > system's production schedule so I may not be able to come
> > > back with that
> > > > until later on today/tomorrow).
> > >
> > > Seems one of the quirks has gone bad. The below should tell
> > > us which one.
> > > You'll need to correlate it with the machine's lspci output please.
> > >
> > >
> > > --- a/drivers/pci/pci.c~a
> > > +++ a/drivers/pci/pci.c
> > > @@ -925,6 +925,7 @@ static int __devinit pci_init(void)
> > > struct pci_dev *dev = NULL;
> > >
> > > while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID,
> > > dev)) != NULL) {
> > > + printk("%s: fix up %s\n", __FUNCTION__, pci_name(dev));
> > > pci_fixup_device(pci_fixup_final, dev);
> > > }
> > > return 0;
> >
> > Having applied that patch, I get:
> >
> > pci_init: fix up 0000:00:00.0
> > pci_init: fix up 0000:00:00.1
> > pci_init: fix up 0000:00:00.2
> > pci_init: fix up 0000:00:00.3
> > pci_init: fix up 0000:00:00.4
> > pci_init: fix up 0000:00:00.5
> > pci_init: fix up 0000:00:00.6
> > pci_init: fix up 0000:00:00.7
> > pci_init: fix up 0000:00:02.0
> > pci_init: fix up 0000:00:03.0
> > pci_init: fix up 0000:00:04.0
> > pci_init: fix up 0000:00:05.0
> > pci_init: fix up 0000:00:09.0
> > pci_init: fix up 0000:00:0a.0
> > pci_init: fix up 0000:00:0a.1
> > pci_init: fix up 0000:00:0a.2
> > pci_init: fix up 0000:00:0b.0
> >
> > lspci -v gives:
> >
> > 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> > Capabilities: [44] HyperTransport: Slave or Primary Interface
> > Capabilities: [e0] HyperTransport: MSI Mapping
> >
> > 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller
> > 0 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller
> > 1 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller
> > 5 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller
> > 4 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> >
> > 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> > Capabilities: [44] #00 [00fe]
> > Capabilities: [fc] #00 [0000]
> >
> > 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller
> > 3 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller
> > 2 (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge
> > (rev a1) (prog-if 00 [Normal decode])
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > I/O behind bridge: 0000a000-0000afff
> > Memory behind bridge: fd800000-fd8fffff
> > Prefetchable memory behind bridge:
> > 00000000fd700000-00000000fd700000
> > Capabilities: [40] #0d [0000]
> > Capabilities: [48] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts:
> > 64bit+ Queue=0/1 Enable+
> > Capabilities: [60] HyperTransport: MSI Mapping
> > Capabilities: [80] Express Root Port (Slot+) IRQ 0
> > Capabilities: [100] Virtual Channel
> >
> > 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge
> > (rev a1) (prog-if 00 [Normal decode])
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > I/O behind bridge: 00008000-00008fff
> > Memory behind bridge: fde00000-fdefffff
> > Prefetchable memory behind bridge:
> > 00000000fdd00000-00000000fdd00000
> > Capabilities: [40] #0d [0000]
> > Capabilities: [48] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts:
> > 64bit+ Queue=0/1 Enable+
> > Capabilities: [60] HyperTransport: MSI Mapping
> > Capabilities: [80] Express Root Port (Slot+) IRQ 0
> > Capabilities: [100] Virtual Channel
> >
> > 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge
> > (rev a1) (prog-if 00 [Normal decode])
> > Flags: bus master, fast devsel, latency 0
> > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> > I/O behind bridge: 0000b000-0000bfff
> > Memory behind bridge: fdc00000-fdcfffff
> > Prefetchable memory behind bridge:
> > 00000000fd900000-00000000fd900000
> > Capabilities: [40] #0d [0000]
> > Capabilities: [48] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts:
> > 64bit+ Queue=0/1 Enable+
> > Capabilities: [60] HyperTransport: MSI Mapping
> > Capabilities: [80] Express Root Port (Slot+) IRQ 0
> > Capabilities: [100] Virtual Channel
> >
> > 00:05.0 VGA compatible controller: nVidia Corporation C51PV
> > [GeForce 6150] (rev a2) (prog-if 00 [VGA])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 58
> > Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> > Memory at e0000000 (64-bit, prefetchable) [size=256M]
> > Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
> > [virtual] Expansion ROM at dc000000 [disabled] [size=128K]
> > Capabilities: [48] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts:
> > 64bit+ Queue=0/0 Enable-
> >
> > 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> > Capabilities: [44] HyperTransport: Slave or Primary Interface
> > Capabilities: [e0] HyperTransport: MSI Mapping
> >
> > 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> >
> > 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel, IRQ 255
> > I/O ports at 4c00 [size=64]
> > I/O ports at 4c40 [size=64]
> > Capabilities: [44] Power Management version 2
> >
> > 00:0a.2 RAM memory: nVidia Corporation MCP51 Memory
> > Controller 0 (rev a3)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: 66MHz, fast devsel
> >
> > 00:0b.0 USB Controller: nVidia Corporation MCP51 USB
> > Controller (rev a3) (prog-if 10 [OHCI])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
> > Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: [44] Power Management version 2
> >
> > 00:0b.1 USB Controller: nVidia Corporation MCP51 USB
> > Controller (rev a3) (prog-if 20 [EHCI])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217
> > Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
> > Capabilities: [44] Debug port
> > Capabilities: [80] Power Management version 2
> >
> > 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
> > (prog-if 8a [Master SecP PriP])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0
> > I/O ports at f400 [size=16]
> > Capabilities: [44] Power Management version 2
> >
> > 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA
> > Controller (rev a1) (prog-if 85 [Master SecO PriO])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
> > I/O ports at 09f0 [size=8]
> > I/O ports at 0bf0 [size=4]
> > I/O ports at 0970 [size=8]
> > I/O ports at 0b70 [size=4]
> > I/O ports at e000 [size=16]
> > Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: [44] Power Management version 2
> > Capabilities: [b0] Message Signalled Interrupts:
> > 64bit+ Queue=0/2 Enable-
> > Capabilities: [cc] HyperTransport: MSI Mapping
> >
> > 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA
> > Controller (rev a1) (prog-if 85 [Master SecO PriO])
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81c0
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217
> > I/O ports at 09e0 [size=8]
> > I/O ports at 0be0 [size=4]
> > I/O ports at 0960 [size=8]
> > I/O ports at 0b60 [size=4]
> > I/O ports at cc00 [size=16]
> > Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: [44] Power Management version 2
> > Capabilities: [b0] Message Signalled Interrupts:
> > 64bit+ Queue=0/2 Enable-
> > Capabilities: [cc] HyperTransport: MSI Mapping
> >
> > 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev
> > a2) (prog-if 01 [Subtractive decode])
> > Flags: bus master, 66MHz, fast devsel, latency 0
> > Bus: primary=00, secondary=04, subordinate=04, sec-latency=128
> > I/O behind bridge: 00009000-00009fff
> > Memory behind bridge: fdb00000-fdbfffff
> > Prefetchable memory behind bridge: fda00000-fdafffff
> > Capabilities: [b8] #0d [0000]
> > Capabilities: [8c] HyperTransport: MSI Mapping
> >
> > 00:10.1 Audio device: nVidia Corporation MCP51 High
> > Definition Audio (rev a2)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 81cb
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225
> > Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
> > Capabilities: [44] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts:
> > 64bit+ Queue=0/0 Enable-
> > Capabilities: [6c] HyperTransport: MSI Mapping
> >
> > 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
> > Subsystem: ASUSTeK Computer Inc. Unknown device 816a
> > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225
> > Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
> > I/O ports at c800 [size=8]
> > Capabilities: [44] Power Management version 2
> >
> > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
> > [Athlon64/Opteron] HyperTransport Technology Configuration
> > Flags: fast devsel
> > Capabilities: [80] HyperTransport: Host or Secondary Interface
> >
> > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
> > [Athlon64/Opteron] Address Map
> > Flags: fast devsel
> >
> > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
> > [Athlon64/Opteron] DRAM Controller
> > Flags: fast devsel
> >
> > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
> > [Athlon64/Opteron] Miscellaneous Control
> > Flags: fast devsel
> > Capabilities: [f0] #0f [0010]
> >
> > 04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> > IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
> > Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
> > Flags: bus master, medium devsel, latency 32, IRQ 209
> > Memory at fdbff000 (32-bit, non-prefetchable) [size=2K]
> > Memory at fdbf8000 (32-bit, non-prefetchable) [size=16K]
> > Capabilities: [44] Power Management version 2
> >
> > So I guess there's something awry with the USB controller driver?
> >
>
> Is there any other info that someone wants to track this down? Or has
> someone got a fix?
>
Best we can do is cc various USB people then wait. Things are slow at
present due to summer migratory activity towards Ottawa.
But when the flock returns, hopefully they will remember that we have a
straightforward box-killing regression in the 2.6.17 OHCI controller quirk
handling.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists