linux-kernel - RE: cpufreq_ondemand governor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <B41635854730A14CA71C92B36EC22AAC0D6914@mssmsx411>
Date:	Sat, 15 Jul 2006 11:05:49 +0400
From:	"Starikovskiy, Alexey Y" <alexey.y.starikovskiy@...el.com>
To:	"art" <art@...ltd.com>, <linux-kernel@...r.kernel.org>
Subject: RE: cpufreq_ondemand governor - problem

Beside ondemand governor there is processor driver who should do
synchronization of frequencies over dependent CPUs (cores in your case).
If policy->cpus mask is set, then ondemand governor will choose minimum
idle time over dependent cores, and calculate load from it. If driver
does set policy-cpus mask, it's his job, or job of the processor itself
to do synchronization.

Hope that helps,
Alex

>-----Original Message-----
>From: art [mailto:art@...ltd.com] 
>Sent: Saturday, July 15, 2006 2:42 AM
>To: linux-kernel@...r.kernel.org
>Cc: Pallipadi, Venkatesh; Starikovskiy, Alexey Y; 
>torvalds@...l.org; akpm@...l.org; mingo@...e.hu
>Subject: cpufreq_ondemand governor - problem
>
>problem:
>on dualcore AMD - if you use cpufreq_ondemand governor and 
>your program is 
>one_process/one_thread intensive one core is busy and second is doing 
>nothing - governor is droping speed on both cores to lowest 
>speed - slowing 
>down busy core process - my dualcore-AMD do this i'm not shure 
>if it is only 
>AMD or INTEL problem too 
>
>to test this set ondemand governor 
>
># echo "ondemand" > 
>/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor 
>
>now
>start in terminal-1 
>
>#awk 'BEGIN {for(i=0;i<100000;i++)for(j=0;j<100000;j++);}' 
>
>observe cpu speed and utilization
>core1 - utilization 100% speed lowest possible
>core2 - utilization 0% speed lowest possible 
>
>now
>start in terminal-2 
>
>#awk 'BEGIN {for(i=0;i<100000;i++)for(j=0;j<100000;j++);}' 
>
>observe cpu speed and utilization
>core1 - utilization 100% speed max possible
>core2 - utilization 100% speed max possible 
>
>now kill one awk 
>
>observe cpu speed and utilization
>core1 - utilization 100% speed lowest possible
>core2 - utilization 0% speed lowest possible 
>
>looks like cpufreq ondemand governor sets two frequency 
>dependent cores to 
>speed level ok for that one with lowest utilization slowing down 
>process/thread working on other core. For now it is ok for independent 
>multiprocessor bad for multicore-freq-dependent. 
>
>
>temporary dirty patch works for me - your result my vary (for 
>shure it will 
>not work for multi-processor/dualcore - we need identify and 
>pair cores to 
>do same thing) 
>
>
> --- cpufreq_ondemand.c-org	2006-07-05 23:09:49.000000000 -0500
>+++ cpufreq_ondemand.c	2006-07-14 15:50:56.000000000 -0500
>@@ -39,6 +39,7 @@
>  * All times here are in uS.
>  */
> static unsigned int def_sampling_rate;
>+static unsigned int load_max_core=0;
> #define MIN_SAMPLING_RATE_RATIO			(2)
> /* for correct statistics, we need at least 10 ticks between 
>each measure 
>*/
> #define MIN_STAT_SAMPLING_RATE			
>(MIN_SAMPLING_RATE_RATIO * 
>jiffies_to_usecs(10))
>@@ -268,6 +269,8 @@ static void dbs_check_cpu(struct cpu_dbs
> 			idle_ticks = tmp_idle_ticks;
> 	}
> 	load = (100 * (total_ticks - idle_ticks)) / total_ticks;
>+	if (load_max_core > load)
>+		load = load_max_core;
>
> 	/* Check for frequency increase */
> 	if (load > dbs_tuners_ins.up_threshold) {
>@@ -297,6 +300,7 @@ static void dbs_check_cpu(struct cpu_dbs
>
> 		__cpufreq_driver_target(policy, freq_next, 
>CPUFREQ_RELATION_L);
> 	}
>+load_max_core = 0;
> }
>
> static void do_dbs_timer(void *data) 
>
>
> --------------------------------------------------- 
>
>after this patch dualcore-AMD is working OK max speed for 100% 
>utilization 
>on core1 and 0% utilization on core2 
>
>
>xboom
>art@...ltd.com
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/