linux-kernel - libata pata_pdc2027x success on sparc64

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <200607172358.k6HNwYhF002052@harpo.it.uu.se>
Date:	Tue, 18 Jul 2006 01:58:34 +0200 (MEST)
From:	Mikael Pettersson <mikpe@...uu.se>
To:	alan@...hat.com
Cc:	albertcc@...ibm.com, linux-ide@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: libata pata_pdc2027x success on sparc64

Alan & Albert,

I just tried the patch-2.6.17-ide1.gz libata PATA patch
on a sparc64 box in which I had put an Ultra133TX2 PCI
card (pdc20269) and an old 80GB IBM Deskstar disk. The
results were excellent: did lots of I/O with no kernel
errors, and I got about 45MB/s read speed at udma5.

(A minor nit: the patch kit doesn't have a config option
for pata_pdc2027x, so I had to hack one in. See below.)

In contrast, the old IDE pdc202xx_new driver had lots
of problems with CRC errors causing it to disable DMA.
I wasn't able to manually tune it above udma3 without
getting more errors. This isn't sparc64-specific: I've
had similar negative experience with the old IDE Promise
drivers in a PowerMac.

/Mikael

--- linux-2.6.17/drivers/scsi/Kconfig.~1~	2006-07-17 23:30:25.000000000 +0200
+++ linux-2.6.17/drivers/scsi/Kconfig	2006-07-17 23:39:25.000000000 +0200
@@ -843,6 +843,10 @@ config SCSI_PATA_PDC_OLD

 	  If unsure, say N.

+config SCSI_PATA_PDC_NEW
+	tristate "Newer Promise PATA controller support (Raving Lunatic)"
+	depends on SCSI_SATA && PCI && EXPERIMENTAL
+
 config SCSI_PATA_QDI
 	tristate "QDI VLB PATA support"
 	depends on SCSI_SATA
--- linux-2.6.17/drivers/scsi/Makefile.~1~	2006-07-17 23:30:25.000000000 +0200
+++ linux-2.6.17/drivers/scsi/Makefile	2006-07-17 23:40:06.000000000 +0200
@@ -161,6 +161,7 @@ obj-$(CONFIG_SCSI_PATA_OPTI)	+= libata.o
 obj-$(CONFIG_SCSI_PATA_OPTIDMA)	+= libata.o pata_optidma.o
 obj-$(CONFIG_SCSI_PATA_PCMCIA)	+= libata.o pata_pcmcia.o
 obj-$(CONFIG_SCSI_PATA_PDC_OLD)	+= libata.o pata_pdc202xx_old.o
+obj-$(CONFIG_SCSI_PATA_PDC_NEW)	+= libata.o pata_pdc2027x.o
 obj-$(CONFIG_SCSI_PATA_QDI)	+= libata.o pata_qdi.o
 obj-$(CONFIG_SCSI_PATA_RADISYS)	+= libata.o pata_radisys.o
 obj-$(CONFIG_SCSI_PATA_RZ1000)	+= libata.o pata_rz1000.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/