Bootdata ok (command line is auto BOOT_IMAGE=linux ro root=6801) Linux version 2.6.18-rc2 (root@test) (gcc-Version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #1 SMP Mon Jul 17 16:01:49 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000f57f6800 (usable) BIOS-e820: 00000000f57f6800 - 00000000f5800000 (ACPI data) BIOS-e820: 00000000fdc00000 - 00000000fdc01000 (reserved) BIOS-e820: 00000000fdc10000 - 00000000fdc11000 (reserved) BIOS-e820: 00000000fdc20000 - 00000000fdc21000 (reserved) BIOS-e820: 00000000fdc30000 - 00000000fdc31000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000003fffff000 (usable) DMI 2.3 present. ACPI: RSDP (v002 HP ) @ 0x00000000000f4f20 ACPI: XSDT (v001 HP A01 0x00000002 Ò 0x0000162e) @ 0x00000000f57f6c00 ACPI: FADT (v003 HP A01 0x00000002 Ò 0x0000162e) @ 0x00000000f57f6c80 ACPI: MADT (v001 HP 00000083 0x00000002 0x00000000) @ 0x00000000f57f6900 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000f57f6a00 ACPI: SRAT (v001 HP A01 0x00000001 0x00000000) @ 0x00000000f57f6a80 ACPI: DSDT (v001 HP DSDT 0x00000001 MSFT 0x02000001) @ 0x0000000000000000 SRAT: PXM 1 -> APIC 0 -> Node 0 SRAT: PXM 2 -> APIC 2 -> Node 1 SRAT: PXM 3 -> APIC 4 -> Node 2 SRAT: PXM 4 -> APIC 6 -> Node 3 SRAT: PXM 1 -> APIC 1 -> Node 0 SRAT: PXM 2 -> APIC 3 -> Node 1 SRAT: PXM 3 -> APIC 5 -> Node 2 SRAT: PXM 4 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 1 0-100000000 SRAT: Node 1 PXM 2 100000000-200000000 SRAT: Node 2 PXM 3 200000000-300000000 SRAT: Node 3 PXM 4 300000000-400000000 NUMA: Using 32 for the hash shift. Bootmem setup node 0 0000000000000000-0000000100000000 Bootmem setup node 1 0000000100000000-0000000200000000 Bootmem setup node 2 0000000200000000-0000000300000000 Bootmem setup node 3 0000000300000000-00000003fffff000 On node 0 totalpages: 989760 DMA zone: 2578 pages, LIFO batch:0 DMA32 zone: 987182 pages, LIFO batch:31 On node 1 totalpages: 1034240 Normal zone: 1034240 pages, LIFO batch:31 On node 2 totalpages: 1034240 Normal zone: 1034240 pages, LIFO batch:31 On node 3 totalpages: 1034240 Normal zone: 1034240 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) Processor #4 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) Processor #5 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 15:1 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31 ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32]) IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35 ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36]) IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39 ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40]) IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43 ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44]) IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at f6000000 (gap: f5800000:8400000) Built 4 zonelists. Total pages: 4092480 Kernel command line: auto BOOT_IMAGE=linux ro root=6801 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2599.929 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Checking aperture... CPU 0: aperture @ 8000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Memory: 16278800k/16777212k available (2232k kernel code, 325952k reserved, 1233k data, 196k init) Calibrating delay using timer specific routine.. 5205.81 BogoMIPS (lpj=10411628) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 24k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12499677 Detected 12.499 MHz APIC timer. Booting processor 1/8 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 5200.27 BogoMIPS (lpj=10400550) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 AMD Opteron (tm) Processor 885 stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 1036 cycles) Booting processor 2/8 APIC 0x4 Initializing CPU#2 Calibrating delay using timer specific routine.. 5200.23 BogoMIPS (lpj=10400477) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/4 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 0 AMD Opteron (tm) Processor 885 stepping 02 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -3 cycles, maxerr 1782 cycles) Booting processor 3/8 APIC 0x6 Initializing CPU#3 Calibrating delay using timer specific routine.. 5200.21 BogoMIPS (lpj=10400435) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/6 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 AMD Opteron (tm) Processor 885 stepping 02 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 1029 cycles) Booting processor 4/8 APIC 0x1 Initializing CPU#4 Calibrating delay using timer specific routine.. 5200.25 BogoMIPS (lpj=10400513) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Opteron (tm) Processor 885 stepping 02 CPU 4: Syncing TSC to CPU 0. CPU 4: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 1005 cycles) Booting processor 5/8 APIC 0x3 Initializing CPU#5 Calibrating delay using timer specific routine.. 5200.15 BogoMIPS (lpj=10400308) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 AMD Opteron (tm) Processor 885 stepping 02 CPU 5: Syncing TSC to CPU 0. CPU 5: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1036 cycles) Booting processor 6/8 APIC 0x5 Initializing CPU#6 Calibrating delay using timer specific routine.. 5200.29 BogoMIPS (lpj=10400597) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6/5 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 1 AMD Opteron (tm) Processor 885 stepping 02 CPU 6: Syncing TSC to CPU 0. CPU 6: synchronized TSC with CPU 0 (last diff -238 cycles, maxerr 1320 cycles) Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 5200.20 BogoMIPS (lpj=10400419) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7/7 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 AMD Opteron (tm) Processor 885 stepping 02 CPU 7: Syncing TSC to CPU 0. CPU 7: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 1028 cycles) Brought up 8 CPUs testing NMI watchdog ... OK. migration_cost=436,535 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT0] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT1] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT2] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT3] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT4] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT5] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT6] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ SSDT7] [20060707] ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [CFG0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:03.0 ACPI: PCI Interrupt Routing Table [\_SB_.CFG0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI2._PRT] ACPI: PCI Root Bridge [CFG1] (0000:04) PCI: Probing PCI hardware (bus 04) ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11) AMD768 RNG detected PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:03.0 IO window: 4000-4fff MEM window: f5f00000-f7dfffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: f7e00000-f7efffff PREFETCH window: disabled. PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:09.0 IO window: 5000-5fff MEM window: f7f00000-f7ffffff PREFETCH window: f8100000-f81fffff PCI: Bridge: 0000:04:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. ACPI: Power Button (FF) [PWRF] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.10) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:05:0d.0[A] -> GSI 32 (level, low) -> IRQ 169 cciss0: <0x3220> at PCI 0000:05:0d.0 IRQ 169 using DAC blocks= 143305920 block_size= 512 heads= 255, sectors= 32, cylinders= 17562 blocks= 429925920 block_size= 512 heads= 255, sectors= 32, cylinders= 52687 blocks= 143305920 block_size= 512 heads= 255, sectors= 32, cylinders= 17562 cciss/c0d0: p1 p2 blocks= 429925920 block_size= 512 heads= 255, sectors= 32, cylinders= 52687 cciss/c0d1: p1 tg3.c:v3.62 (June 30, 2006) GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 25 (level, low) -> IRQ 177 eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:16:35:7c:ac:b3 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 24 (level, low) -> IRQ 185 eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:16:35:7c:ac:b2 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:04.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 rtc-test rtc-test.0: rtc intf: sysfs rtc-test rtc-test.0: rtc intf: proc rtc-test rtc-test.0: rtc intf: dev (254:0) rtc-test rtc-test.0: rtc core: registered test as rtc0 rtc-test rtc-test.1: rtc intf: sysfs rtc-test rtc-test.1: rtc intf: dev (254:1) rtc-test rtc-test.1: rtc core: registered test as rtc1 input: PS/2 Generic Mouse as /class/input/input1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller rtc-test rtc-test.0: setting the system clock to 2006-07-18 08:58:07 (1153213087) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 196k freed Adding 2317432k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:2317432k EXT3 FS on cciss/c0d0p1, internal journal PM: Writing back config space on device 0000:02:06.0 at offset b (was 164814e4, writing d00e11) PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:02:06.0 at offset 2 (was 2000000, writing 2000010) PM: Writing back config space on device 0000:02:06.0 at offset 1 (was 2b00000, writing 2b00146) PM: Writing back config space on device 0000:02:06.1 at offset b (was 164814e4, writing d00e11) PM: Writing back config space on device 0000:02:06.1 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:02:06.1 at offset 2 (was 2000000, writing 2000010) PM: Writing back config space on device 0000:02:06.1 at offset 1 (was 2b00000, writing 2b00146) tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. tg3: eth1: Link is up at 1000 Mbps, full duplex. tg3: eth1: Flow control is off for TX and off for RX. ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack device eth1 entered promiscuous mode device eth1 left promiscuous mode device eth1 entered promiscuous mode device eth1 left promiscuous mode device eth1 entered promiscuous mode device eth1 left promiscuous mode Dead loop on netdevice eth0, fix it urgently! Dead loop on netdevice eth1, fix it urgently! Dead loop on netdevice eth1, fix it urgently! Dead loop on netdevice eth0, fix it urgently!